SAIKE 878D Hot air soldering station

Description

Features
1. Using microcomputer processor PID program control technology, the program tracks the actual temperature of the hot air gun and soldering iron at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. Various parts of machine device are have self-deteetion function, full intelligent over-temperature, short circuit, open circuit, overload failure have display and protection.
3. The machine is provided with a fuse inside, and the exposed metal parts of each component are connected with a ground wire to provide comprehensive protection for the safety of electricity.
4. The machine adopts the design without independent transformer, which makes the fuselage lighter and improves the transportation performance.
5. Hot air gun heater adopts the skeleton type ceramic heating core, and the high-quality production process significantly improves the reliability and stability, and increases the working life.
6. The handle of the Hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the Hot air gun can quickly enter the working state; Put the handle back on the handle frame, the Hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
7. Hot air gun uses a brushless fan as the air source, air volume is large, air volume is adjustable, gentle wind power and minimal noise.
8. Soldering iron uses 878D ceramic heating core, peak heating, rapid heating, and fast temperature compensation function. Therefore, it is very suitable for the diswelding of various solder joints, especially for the diswelding of large solder joints, rough blocks and miscellaneous difficult solder joints.
9. Iron part is anti-static design, to prevent electrostatic damage to delicate SMD components.
10. Soldering iron has a 10-minute fixed hibernation function. When no one is in use, the soldering iron is at rest. After about 10 minutes, the soldering iron will enter the hibernation state.
11. Using Ferro-alloy Soldering iron seat, durable, avoid burns.