Product Overview
SAIKE 8310D Hot air soldering station with Preheating station is a SAIKE repair tool for professional electronics repair work. 700W Hot air rework station, 60W Soldering station and 500W preheating station in one, brushless fan airflow, digital display for all main functions.
Model Position
Use this model when the buyer needs a repair bench tool matched to its voltage, plug type, quantity and application requirements.
Key Features
- This product is a 3-in-1 multi-functional BGA repair equipment specially designed for repair bench requirements. It integrates the hot air gun, soldering station and Preheating station in one, with comprehensive functions, and provides a a practical workflow for daily repair work. The three functions also have independent switches, which can be used separately or simultaneously. It requires less bench space, practical and energy saving, performance has been further improved.
- Each part of the equipment adopts an independent microcontroller, the hot air gun, the soldering iron and the Preheating station work independently, even if there is a problem in one way, it does not affect the normal work of the other way, and the high integrated circuit design greatly reduces the failure rate of the product.
- PID temperature control tracks the working temperature quickly and supports fast temperature compensation.
- The machine includes self-diagnosis and display/protection for over-temperature, short circuit, open circuit and overload faults.
- A rear fuse holder and grounded metal parts help improve electrical safety.
- The hot air gun heater uses the skeleton type ceramic heating core, and the the design supports stable operation and longer heater service life.
- The handle of the hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the hot air gun can quickly enter the working state; Put the handle back on the handle frame, the hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
- hot air gun uses a brushless fan as the air source, air volume is large, air volume is adjustable, gentle wind power and minimal noise.
- Soldering iron uses 131A ceramic heating core, peak heating, rapid heating, and fast temperature compensation function. Therefore, it is very suitable for the desoldering of various solder joints, especially for the desoldering of large solder joints, rough blocks and miscellaneous difficult solder joints.
- The soldering iron is designed with anti-static protection, to prevent electrostatic damage to sensitive SMD components.
- Using Ferro-alloy Soldering iron seat, durable, avoid burns.
- Preheating station is a professional maintenance equipment, specially designed circuit board telescopic clamp table, to assist the fixed circuit board for preheating and rapid dismantling. It is robust and durable, suitable for all types of circuit boards and components.
- Preheating station is also equipped with efficient heating elements and a precise temperature control system, which allows the preheater to quickly raise the temperature and achieve the ideal de-soldering effect in a short time with the hot air gun. About the hot air gun fixed bracket It can also be Equipped a hot air gun bracket, without the need to hold a hot air gun, just place it on the hot air gun bracket, you can reduce the burden on the arms and hands, reducing the fatigue that may be caused by holding the hot air gun for a long time. At the same time, it ensures that the hot air gun is always in the correct position. Make you more focused on the welding work, without worrying about the stability of the hot air gun. This will give you more maneuverable space, allowing you to move and adjust the circuit board more freely to better access and handle the solder joints, which will facilitate your component dismantling work.
Component Function Notes
hot air gun
By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.
- Suitable for various kinds of soldering or desoldering work of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
- Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.
Soldering Iron
The soldering iron transfers heat through the tip to melt solder for soldering and desoldering work.
- Suitable for relatively larger solder joints or pads to provide enough heat for better completion of welding operations.
- For thicker and larger solder joints and pads, you can try replacing the soldering iron tip with a larger contact area or use a hot air gun for welding.
Preheating Station
The preheating plate radiates heat, the circuit board is heated to the appropriate temperature, and this temperature is maintained so that the area around the electronic components on the circuit board reaches a predetermined temperature. This makes it possible to use a heat gun to quickly melt solder and dissolder electronic components. The preheating table helps to avoid the failure to reach the melting point of the solder due to rapid temperature loss, which makes it impossible to complete the desoldering of electronic components. The preheating platform not only improves the efficiency of the desoldering, but also guarantees the quality of the desoldering.
- Suitable for auxiliary dismantling of large solder joints or pads, especially for heavy or large welding materials, and the presence of heat-absorbing parts such as metals around. It provides sufficient heat and is used in conjunction with a heat gun to better complete welding operations.
Technical Specifications
| Model | 8310D |
| Input voltage | 220V~240V/AC, 50Hz (110V/AC, 60Hz) |
| Power consumption | 1210W |
| Weight | 5.42kg |
| Inner box size | 375*355*185mm |
| Packing quantity | 4 pieces / box |
| Outer packing size | 730*386*390mm |
| hot air gun | |
|---|---|
| Working voltage | 220V~240V/AC, 50Hz (110V/AC, 60Hz) |
| Power consumption | 700W |
| Display form | LED digital (Resolution 1℃) |
| Heating element | Skeleton type ceramic heating core |
| Temperature range | 100℃－480℃ |
| Temperature stability | ±1℃ |
| Type of air flow | brushless fan airflow |
| Gas flow | 120 L/min(max) |
| Noise | Less than 45dB |
| Handle length | About 100cm (Including handle line) |
| Soldering iron | |
| Working voltage | 24V/AC |
| Rated power | 22W |
| Power consumption | 60W |
| Maximum power | 120W |
| Display form | LED digital (Resolution 1℃) |
| Temperature range | 200℃－480℃ |
| Heating element | 131A ceramic heating core |
| Temperature stability | ±2℃(no load) |
| Handle length | About 100cm (Including handle line) |
| Preheating station | |
| Working voltage | 220V~240V/AC, 50Hz (110V/AC, 60Hz) |
| Power consumption | 500W |
| Display form | LED digital (Resolution 1℃) |
| Temperature range | 50℃－400℃ |
| Preheating area | 120mm×120mm |
| Placement area | ≤170mm×170mm |
| Temperature stability | ±2℃(no load) |
Standard Configuration
- Host machine (include hot air gun handle): 1 pcs
- hot air gun rack: 1 pcs
- hot air gun fixed bracket: 1 pcs
- Soldering iron handle (include iron tip and heater): 1 pcs
- Soldering iron holder (include Cleaning sponge): 1 pcs
- Nozzles: 4 pcs (5mm, 8mm, 10mm, 12*12mm)
- User manual: 1 pcs
Typical Applications
- Electronic product assembly
- Product development in scientific research departments
- Electronic products maintenance
- Electrical soldering operation
- electronics training and repair education
Order and Configuration Notes
Please confirm rated voltage, power plug, order quantity and accessory requirements before production or shipment. For distributor orders, repair shop bundles or accessory kits, contact SAIKE with the target models and quantity so we can confirm a suitable configuration.
Reviews
There are no reviews yet.