SAIKE 909D+ Hot air soldering station with DC Power Supply 15V 3A

Product Overview

SAIKE 909D+ is a 3 in 1 repair station with hot air rework, soldering and a higher-current DC regulated power supply. It is aimed at repair shops that need the same compact workstation format with more DC output capacity.

Model Position

Choose this version when the repair bench needs the 909D workflow but a stronger DC supply for testing and maintenance.

Key Features

• This model is a multifunctional repair workstation for professional electronics service benches. It integrates hot air gun, soldering iron and DC regulated power supply. It has comprehensive functions and provides a practical workflow for daily repair work. The three functions also have independent switches, which can be used separately or simultaneously. It requires less bench space, practical and saves power, further improves performance.
• Each part of the equipment adopts an independent microcontroller, the hot air gun, the soldering iron and the DC regulated power supply work independently, even if there is a problem in one way, it does not affect the normal work of the other way, and the high integrated circuit design greatly reduces the failure rate of the product.
• PID temperature control tracks the working temperature quickly and supports fast temperature compensation.
• The machine includes self-diagnosis and display/protection for over-temperature, short circuit, open circuit and overload faults.
• A rear fuse holder and grounded metal parts help improve electrical safety.
• The hot air gun heater uses the skeleton type ceramic heating core, and the the design supports stable operation and longer heater service life.
• The handle of the hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the hot air gun can quickly enter the working state; Put the handle back on the handle frame, the hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
• hot air gun uses a brushless fan as the air source, air volume is large, air volume is adjustable, gentle wind power and minimal noise.
• Soldering iron uses 131A ceramic heating core, peak heating, rapid heating, and fast temperature compensation function. Therefore, it is very suitable for the desoldering of various solder joints, especially for the desoldering of large solder joints, rough blocks and miscellaneous difficult solder joints.
• The soldering iron is designed with anti-static protection, to prevent electrostatic damage to sensitive SMD components.
• Using Ferro-alloy Soldering iron seat, durable, avoid burns.
• DC regulated power supply part is equipped with continuous short-circuit protection and recovery function to help protect the load during short-circuit or abnormal operating conditions.
• DC regulated voltage power supply can output or measure DC voltage, not only as a mobile phone repair power supply, but also can be used to check and repair other electronic circuits or components.

Component Function Notes

Technical Specifications

Standard Configuration

• Host machine (include hot air gun handle): 1 pcs
• hot air gun rack: 1 pcs
• Soldering iron handle (include iron tip and heater): 1 pcs
• Soldering iron holder (include Cleaning sponge): 1 pcs
• Nozzles: 4 pcs (5mm, 8mm, 10mm, 12*12mm)
• Power supply interface Test cable: 1 pcs
• Multimeter pen: 1 pcs
• User manual: 1 pcs

Typical Applications

• Electronic product assembly
• Product development in scientific research departments
• Electronic products maintenance
• Electrical soldering operation
• electronics training and repair education

Order and Configuration Notes

Please confirm rated voltage, power plug, order quantity and accessory requirements before production or shipment. For distributor orders, repair shop bundles or accessory kits, contact SAIKE with the target models and quantity so we can confirm a suitable configuration.