Product Overview
SAIKE 201A+ is a desoldering station for removing solder from through-hole components, connectors and repair boards.
Model Position
Use this model when the main task is desoldering rather than hot air rework.
Key Features
- PID temperature control tracks the working temperature quickly and supports fast temperature compensation.
- The machine includes self-diagnosis and display/protection for over-temperature, short circuit, open circuit and overload faults.
- A rear fuse holder and grounded metal parts help improve electrical safety.
- The Desoldering Gun uses 201A Desoldering Gun ceramic heating core, which has peak heating, fast heating and fast temperature compensation functions, making it suitable for desoldering circuit boards, electronic components such as work that requires component removal and replacement.
- Desoldering Gun uses vacuum pump as the air source, strong suction and low noise.
- Desoldering Gun part is anti-static design, to prevent electrostatic damage to sensitive SMD components.
- Desoldering Gun and Soldering iron has a 10-minute fixed hibernation function. When no one is in use, the Desoldering Gun or soldering iron is at rest, After about 10 minutes, the Desoldering Gun or soldering iron will enter the hibernation state.
- Desoldering Gun and soldering iron can be used alternately by switching.
- Soldering iron uses 131A ceramic heating core, peak heating, rapid heating, and fast temperature compensation function. Therefore, it is very suitable for the desoldering of various solder joints, especially for the desoldering of large solder joints, rough blocks and miscellaneous difficult solder joints.
- The soldering iron is designed with anti-static protection, to prevent electrostatic damage to sensitive SMD components.
- Using Ferro-alloy Desoldering Gun and Soldering iron in one holder, durable, avoid burns.
Component Function Notes
Desoldering Gun
The heated suction tip melts solder at the joint. The vacuum pump then draws the molten solder into the collection chamber for component desoldering. This tool is often used to repair and assemble electronic equipment, especially where components need to be replaced or circuits repaired. It removes solder quickly and accurately, increasing work efficiency while also protecting circuit boards and other electronic components from damage.
- Suitable for a variety of upright components and other special desoldering, especially suitable for multi-pin through-hole components (such as transformers, LCD screens, digital tubes, integrated chips, pins, etc.) welding.
Soldering Iron
The soldering iron transfers heat through the tip to melt solder for soldering and desoldering work.
- Suitable for relatively larger solder joints or pads to provide enough heat for better completion of welding operations.
- For thicker and larger solder joints and pads, you can try replacing the soldering iron tip with a larger contact area or use a hot air gun for welding.
Operation Guide
Technical Specifications
| Model | 201A+ |
| Input voltage | 220V~240V/AC, 50Hz (110V/AC, 60Hz) |
| Power consumption | 150W |
| Weight | 4.74kg |
| Inner box size | 350*275*160mm |
| Packing quantity | 4 pieces / box |
| Outer packing size | 575*365*380mm |
| Desoldering Gun | |
|---|---|
| Working voltage | 220V~240V/AC, 50Hz (110V/AC, 60Hz) |
| Power consumption | 90W |
| Display form | LED digital (Resolution 1℃) |
| Heating element | 201A Ceramic heating core |
| Temperature range | 350℃－480℃ |
| Temperature stability | ±1℃ |
| Type of air flow | Vacuum pump |
| Suction Pressure | 0.05MPa |
| Noise | Less than 45dB |
| Handle length | About 100cm (Including handle line) |
| Soldering iron | |
| Working voltage | 24V/AC |
| Rated power | 22W |
| Power consumption | 60W |
| Maximum power | 120W |
| Display form | LED digital (Resolution 1℃) |
| Temperature range | 200℃－480℃ |
| Heating element | 131A ceramic heating core |
| Temperature stability | ±2℃(no load) |
| Handle length | About 100cm (Including handle line) |
Standard Configuration
- Host machine: 1 pcs
- Desoldering Gun handle (include 1.0mm Suction tip and heater): 1 pcs
- Soldering iron handle (include iron tip and heater): 1 pcs
- Desoldering Gun and Soldering iron in one holder (include Cleaning sponge): 1 pcs
- Suction tip: 1 pcs (1.2mm)
- User manual: 1 pcs
Typical Applications
- Electronic product assembly
- Product development in scientific research departments
- Electronic products maintenance
- Electrical soldering operation
- electronics training and repair education
Order and Configuration Notes
Please confirm rated voltage, power plug, order quantity and accessory requirements before production or shipment. For distributor orders, repair shop bundles or accessory kits, contact SAIKE with the target models and quantity so we can confirm a suitable configuration.
Reviews
There are no reviews yet.