SAIKE 852D++ Hot air soldering station
$78.00 – $87.00
Description
Features
1. Using microcomputer processor PID program control technology, the program tracks the actual temperature of the hot air gun and soldering iron at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. Various parts of machine device are have self-deteetion function, full intelligent over-temperature, short circuit, open circuit, overload failure have display and protection.
3. The back of the machine is provided with a fuse holder, and the exposed metal parts of each component are connected with a ground wire to provide comprehensive protection for the safety of electricity.
4. Hot air gun heater adopts the skeleton type ceramic heating core, and the high-quality production process significantly improves the reliability and stability, and increases the working life.
5. The handle of the Hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the Hot air gun can quickly enter the working state; Put the handle back on the handle frame, the Hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
6. Hot air gun uses a brushless fan as the air source, air volume is large, air volume is adjustable, gentle wind power and minimal noise.
7. Soldering iron uses 132A ceramic heating core, stable heating, rapid warming, reduce loss, long service life.
8. Iron part is anti-static design, to prevent electrostatic damage to delicate SMD components.
About the hot air gun fixed bracket
It can also be Equipped a hot air gun bracket, without the need to hold a hot air gun, just place it on the hot air gun bracket, you can reduce the burden on the arms and hands, reducing the fatigue that may be caused by holding the hot air gun for a long time. At the same time, it ensures that the hot air gun is always in the correct position. Make you more focused on the welding work, without worrying about the stability of the hot air gun. This will give you more maneuverable space, allowing you to move and adjust the circuit board more freely to better access and handle the solder joints, which will facilitate your component dismantling work.
Parameters
| Model: | 852D++ / 852D++ (Equipped Bracket) |
| Input voltage: | 220V~240V/AC, 50Hz (110V/AC, 60Hz) |
| Power consumption: | 740W |
| Weight: | 2.92kg / 3.17kg |
| Inner box size: | 210*300*215mm |
| Packing quantity: | 6 pieces / box |
| Outer packing size: | 438*320*665mm |
| Hot air gun | |
| Working voltage: | 220V~240V/AC, 50Hz (110V/AC, 60Hz) |
| Power consumption: | 700W |
| Display form: | LED digital (Resolution 1℃) |
| Heating element: | Skeleton type ceramic heating core |
| Temperature range: | 100℃－500℃ |
| Temperature stability: | ±1℃ |
| Type of air flow: | Brushless fan soft wind |
| Gas flow: | 120 L/min(max) |
| Noise: | Less than 45dB |
| Handle length: | About 100cm(Including handle line) |
| Soldering iron | |
| Working voltage: | 24V/AC |
| Power consumption: | 40W |
| Display form: | LED digital (Resolution 1℃) |
| Temperature range: | 200℃－500℃ |
| Heating element: | 132A ceramic heating core |
| Temperature stability: | ±2℃(no load) |
| Handle length: | About 100cm(Including handle line) |
Standard Configuration
Host machine (include Hor air gun handle): 1 pcs
Hot air gun rack: 1 pcs
Soldering iron handle (include iron tip and heater): 1 pcs
Soldering iron holder (include Cleaning sponge): 1 pcs
Nozzles: 4 pcs (5mm, 8mm, 10mm, 12*12mm)
User manual: 1 pcs
Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions
About the hot air gun
By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
2. Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.
About the Soldering iron
By heating the welding tip to conduct heat to heat the solder and melt it, to achieve the desoldering of electronic components.
1. Suitable for small solder joints or pads, such as thinner, smaller welding materials, no surrounding metal and other heat-absorbing parts.
2. For relatively thick and large solder joints and pads, you can try replacing the soldering iron tip with a larger contact area or use a hot air gun for welding.
Related Names
Low Temperature Lead Free Soldering Tool | Electronics Soldering Device | Thermostat Soldering Station
Additional information
| Weight | 3.2 kg |
|---|---|
| Bracket | Equipped, Not equipped |
| Rated Voltage | 110V, 220V |
| Power Plug | CN, EU, UK, US |
You must be logged in to post a review.
Related products
SAIKE 852D+ Hot air soldering station Air pump type
$84.00
Subscribe to our newsletter and get 10% Off!
Velit morbi sed non est dolor tellus fringilla diam
Reviews
There are no reviews yet.