Product Overview
SAIKE 8058 Portable hot air gun rework station is a SAIKE repair tool for professional electronics repair work. 650W hot air gun rework station, Blower, high air volume, digital display.
Model Position
Use this model when the buyer needs a repair bench tool matched to its voltage, plug type, quantity and application requirements.
Key Features
- PID temperature control tracks the working temperature quickly and supports fast temperature compensation.
- The machine has self-detection function, and the intelligent overtemperature, short circuit, open circuit and overload fault are displayed and protected.
- The machine is connected with a ground wire to provide comprehensive protection for the safety of electricity.
- Machine portable design, small size, light weight, easy to carry, simple operation.
- The hot air gun heater uses the skeleton type ceramic heating core, and the the design supports stable operation and longer heater service life.
- hot air gun has the function of delay blowing cold air and automatic cooling. When the hot air gun switch is turned off, the hot air gun will stop heating. If the temperature is too high, the cold air will delay closing. It stops blowing after the temperature drops, thus extending the service life of the hot air gun.
- hot air gun adopts the blower as the air source, which has strong wind pressure, high air volume, adjustable air volume and low noise.
Component Function Notes
hot air gun
By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.
- Suitable for various kinds of soldering or desoldering work of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
- Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.
Technical Specifications
| Model | 8058 |
| Input voltage | 220V~240V/AC, 50Hz (110V/AC, 60Hz) |
| Power consumption | 650W |
| Weight | 0.63kg |
| Inner box size | 365*132*67mm |
| Packing quantity | 24 pieces / box |
| Outer packing size | 500*350*440mm |
| hot air gun | |
|---|---|
| Working voltage | 220V~240V/AC, 50Hz (110V/AC, 60Hz) |
| Power consumption | 650W |
| Display form | LED digital (Resolution 1℃) |
| Heating element | Skeleton type ceramic heating core |
| Temperature range | 100℃－480℃ |
| Temperature stability | ±1℃ |
| Type of air flow | Blower |
| Gas flow | 120 L/min(max) |
| Noise | Less than 45dB |
| Handle length | About 140cm(Including handle line) |
Standard Configuration
- Host machine (include hot air gun handle): 1 pcs
- hot air gun rack: 1 pcs
- Nozzles: 3 pcs (8mm, 10mm, 12*12mm)
- User manual: 1 pcs
Typical Applications
- Electronic product assembly
- Product development in scientific research departments
- Electronic products maintenance
- Electrical soldering operation
- electronics training and repair education
Order and Configuration Notes
Please confirm rated voltage, power plug, order quantity and accessory requirements before production or shipment. For distributor orders, repair shop bundles or accessory kits, contact SAIKE with the target models and quantity so we can confirm a suitable configuration.
Reviews
There are no reviews yet.