Features
1. SAIKE 2008D hot air rework station is small and delicate with the aluminum alloy case and panel.
2. It has three storage locations, separately used to set or store different temperature and air volume values. Based on the actual application requirements, you can speedily adjust the storage unit settings with the shortcut keys. So to speak, our equipment is extremely suitable for the standardized assembly line production.
3. The rework station can achieve the real-time tracking and real-time correction of air outlet temperature, since it is equipped with the microcomputer PID program. The PID temperature correction cycle is 100ms. Due to the rapid correction of the temperature, the equipment is low in power consumption.
4. SAIKE 2008D hot air rework station adopts the brushless fan which comes with long service life but low noise generation. Additionally, it is doubled in working efficiency, because of the high quality heating element used to the brushless fan.
5. Its air gun handle utilizes the high quality skeleton heater. This type of heater is durable in use, and offers high efficiency. Besides that, the air gun handle comes with the security protection function. When power on, the handle must be at frame, so that the machine can start working properly.
6. Finally, our SAIKE 2008D hot air rework station can automatically detect the failures. If there are any failures, it will send out alarming signals.
Parameters
| Model | 2008D |
| Type | LED digital display |
| Input voltage | 220V/50Hz(110V/60Hz) |
| Weight | 1.9kg |
| Case size | 150cm*100*138mm |
| Inner box size | 260*166*155mm |
| Packing quantity | 12 Piece / boxes |
| Outer packing size | 540*350*480mm |
| Hot air | |
| Working voltage | AC220V/50HZ(AC110V/60Hz) |
| Power dissipation | 700W |
| Heating element | Skeleton type ceramic heating core |
| Temperature range | 100℃－500℃ |
| Display form | LED digital (resolution 1℃) |
| Temperature stability | ±1℃ |
| Type of air flow | Brushless fan soft wind |
| Gas flow | 120 L/min(max) |
| Noise | Less than 45dB |
| Handle length | About 100cm(Including handle line) |
Standard Configuration
Machine: 1pc
Manual: 1pc
Air gun handle: 1pc
Nozzles: 4pcs (5mm, 8mm, 10mm, 12*12mm)
Handle frame: 1pc
Power plug: 1pc
Application
SAIKE 2008D hot air rework station can be used to weld SMD components, multi-pin IC, and circuit board components, in the areas including laboratories, schools, electronic production lines, mobile phone repair industry, and home appliance maintenance department.
Related Names
Digital Soldering Station | SMD Desoldering Tool | Electronic Parts Soldering Machine
