Suction tin Desoldering station – SAIKE TOOL – Professional Hot Air Soldering Stations and Electronic Repair Equipment Supplier https://en.saikecn.com Efficient and Reliable Electronic Repair Solutions - Enhance Your Repair Efficiency, Ensuring Optimal Device Performance Sat, 13 Jul 2024 03:23:36 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://en.saikecn.com/wp-content/uploads/2023/10/ICO-66x66.jpg Suction tin Desoldering station – SAIKE TOOL – Professional Hot Air Soldering Stations and Electronic Repair Equipment Supplier https://en.saikecn.com 32 32 SAIKE 201B High frequency Suction tin gun Desoldering station with Vacuum pen https://en.saikecn.com/product/201b https://en.saikecn.com/product/201b#respond Fri, 10 Nov 2023 15:23:31 +0000 https://en.saikecn.com/?post_type=product&p=850 Features
1. Using microcomputer processor PID program control technology, the program tracks the actual temperature of the suction tin gun at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. Various parts of machine device are have self-deteetion function, full intelligent over-temperature, short circuit, open circuit, overload failure have display and protection.
3. The back of the machine is provided with a fuse holder, and the exposed metal parts of each component are connected with a ground wire to provide comprehensive protection for the safety of electricity.
4. Suction tin gun adopted 201B suction tin gun high-frequency ceramic heating core, provide more powerful power and high efficiency speed of temperature compensation. This allows the suction tin gun to quickly and accurately complete the welding task, especially suitable for dismantling large solder joints, rough blocks, ultra-thick, oversized circuit boards and electronic components that need to be removed and replaced.
5. Suction tin gun uses vacuum pump as the air source, strong suction and low noise.
6. Suction tin gun part is anti-static design, to prevent electrostatic damage to delicate SMD components.
7. Suction tin gun has a sleep function (which can be turned on or off) for a preset time of 1 to 99 minutes. When no one is in use, the suction tin gun is in a quiescent state, and when the preset time is reached, the suction tin gun will go to sleep.
8. Suction tin gun has the automatic shutdown function. When the suction tin gun enters the dormancy state for 1 to 30 minutes (the time range can be set), the suction tin gun will automatically shut down and display “–“, and the heating will resume after restarting the power supply.
9. Suction tin gun has password protection function, enter the function parameters to set, you must enter the password. Only after entering the correct password can you change the function parameters, so as to prevent the operator from changing and affecting the operation efficiency.
10. Using Ferro-alloy Suction tin gun holder, durable, avoid burns.
11. Equipped with a vacuum suction pen, it can be used alternately with the suction tin gun through the vacuum suction port to help remove the IC.

Warm reminder:
When using the suction tin gun, the display temperature flashes (preheating), only when the temperature reaches the set temperature, the display stops flashing (preheating is complete), the vacuum pump can work.

Parameters

Model:  201B
Input voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  170W
Weight:  5.44kg
Inner box size:  350*275*160mm
Packing quantity:  4 pieces / box
Outer packing size:  575*365*380mm
Suction tin gun
Working voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  170W
Display form:  LED digital (Resolution 1℃)
Heating element:  201B High frequency heating ceramic heating core
Temperature range:  380℃－480℃
Temperature stability:  ±1℃
Type of air flow:  Vacuum pump
Suction Pressure:  0.05MPa
Noise:  Less than 45dB
Handle length:  About 100cm (Including handle line)


Standard Configuration
Host machine: 1 pcs
Suction tin gun handle (include 1.0mm Suction tip and heater): 1 pcs
Suction tin gun holder (include Cleaning sponge): 1 pcs
Suction tip: 2 pcs (0.8mm, 1.2mm)
Vacuum suction pen(include Straight suction tip and curved suction tip): 1 pcs
Suction cup: 4 pcs (Extremely small, Small, Medium, Large)
User manual: 1 pcs

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions

About the Suction tin gun
By heating the suction tip to conduct heat, causing the solder to heat up and melt. Then, the vacuum pump is used to suck the melted solder into the suction chamber, so as to achieve the diswelding of electronic components. This tool is often used to repair and assemble electronic equipment, especially where components need to be replaced or circuits repaired. It removes solder quickly and accurately, increasing work efficiency while also protecting circuit boards and other electronic components from damage.
1. Suitable for a variety of upright components and other special desoldering, especially suitable for more pin in-line components (such as transformers, LCD screens, digital tubes, integrated chips, pins, etc.) welding.

Related Names
Low Temperature Lead Free Soldering Tool | Electronics Soldering Device | Thermostat Soldering Station

]]> https://en.saikecn.com/product/201b/feed 0 SAIKE 201A+ Suction tin gun Desoldering station with Soldering iron https://en.saikecn.com/product/201a-plus https://en.saikecn.com/product/201a-plus#respond Fri, 10 Nov 2023 15:20:33 +0000 https://en.saikecn.com/?post_type=product&p=849 Features
1. Using microcomputer processor PID program control technology, the program tracks the actual temperature of the suction tin gun and soldering iron at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. Various parts of machine device are have self-deteetion function, full intelligent over-temperature, short circuit, open circuit, overload failure have display and protection.
3. The back of the machine is provided with a fuse holder, and the exposed metal parts of each component are connected with a ground wire to provide comprehensive protection for the safety of electricity.
4. Suction tin gun adopts 201A suction tin gun ceramic heating core, which has peak heating, fast heating and fast temperature compensation functions, therefore very suitable for desoldering circuit boards, electronic components such as job need to remove and replace parts.
5. Suction tin gun uses vacuum pump as the air source, strong suction and low noise.
6. Suction tin gun part is anti-static design, to prevent electrostatic damage to delicate SMD components.
7. Suction tin gun and Soldering iron has a 10-minute fixed hibernation function. When no one is in use, the suction tin gun or soldering iron is at rest, After about 10 minutes, the suction tin gun or soldering iron will enter the hibernation state.
8. Suction tin gun and soldering iron can be used alternately by switching.
9. Soldering iron uses 131A ceramic heating core, peak heating, rapid heating, and fast temperature compensation function. Therefore, it is very suitable for the diswelding of various solder joints, especially for the diswelding of large solder joints, rough blocks and miscellaneous difficult solder joints.
10. Iron part is anti-static design, to prevent electrostatic damage to delicate SMD components.
11. Using Ferro-alloy Suction tin gun and Soldering iron in one holder, durable, avoid burns.

Warm reminder:
When using the suction tin gun, the display temperature flashes (preheating), only when the temperature reaches the set temperature, the display stops flashing and (beep) sounds (preheating is complete), the vacuum pump can work.

Parameters

Model:  201A+
Input voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  150W
Weight:  4.74kg
Inner box size:  350*275*160mm
Packing quantity:  4 pieces / box
Outer packing size:  575*365*380mm
Suction tin gun
Working voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  90W
Display form:  LED digital (Resolution 1℃)
Heating element:  201A Ceramic heating core
Temperature range:  350℃－480℃
Temperature stability:  ±1℃
Type of air flow:  Vacuum pump
Suction Pressure:  0.05MPa
Noise:  Less than 45dB
Handle length:  About 100cm (Including handle line)
Soldering iron
Working voltage:  24V/AC
Rated power:  22W
Power consumption:  60W
Maximum power:  120W
Display form:  LED digital (Resolution 1℃)
Temperature range:  200℃－480℃
Heating element:  131A ceramic heating core
Temperature stability:  ±2℃(no load)
Handle length:  About 100cm (Including handle line)


Standard Configuration
Host machine: 1 pcs
Suction tin gun handle (include 1.0mm Suction tip and heater): 1 pcs
Soldering iron handle (include iron tip and heater): 1 pcs
Suction tin gun and Soldering iron in one holder (include Cleaning sponge): 1 pcs
Suction tip: 1 pcs (1.2mm)
User manual: 1 pcs

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions

About the Suction tin gun
By heating the suction tip to conduct heat, causing the solder to heat up and melt. Then, the vacuum pump is used to suck the melted solder into the suction chamber, so as to achieve the diswelding of electronic components. This tool is often used to repair and assemble electronic equipment, especially where components need to be replaced or circuits repaired. It removes solder quickly and accurately, increasing work efficiency while also protecting circuit boards and other electronic components from damage.
1. Suitable for a variety of upright components and other special desoldering, especially suitable for more pin in-line components (such as transformers, LCD screens, digital tubes, integrated chips, pins, etc.) welding.

About the Soldering iron
By heating the welding tip to conduct heat to heat the solder and melt it, to achieve the desoldering of electronic components.
1. Suitable for relatively larger solder joints or pads to provide enough heat for better completion of welding operations.
2. For thicker and larger solder joints and pads, you can try replacing the soldering iron tip with a larger contact area or use a hot air gun for welding.

Related Names
Low Temperature Lead Free Soldering Tool | Electronics Soldering Device | Thermostat Soldering Station

]]> https://en.saikecn.com/product/201a-plus/feed 0 SAIKE 201A Suction tin gun Desoldering station https://en.saikecn.com/product/201a https://en.saikecn.com/product/201a#respond Fri, 10 Nov 2023 15:18:34 +0000 https://en.saikecn.com/?post_type=product&p=848 Features
1. Using microcomputer processor PID program control technology, the program tracks the actual temperature of the suction tin gun at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. Various parts of machine device are have self-deteetion function, full intelligent over-temperature, short circuit, open circuit, overload failure have display and protection.
3. The back of the machine is provided with a fuse holder, and the exposed metal parts of each component are connected with a ground wire to provide comprehensive protection for the safety of electricity.
4. Suction tin gun adopts 201A suction tin gun ceramic heating core, which has peak heating, fast heating and fast temperature compensation functions, therefore very suitable for desoldering circuit boards, electronic components such as job need to remove and replace parts.
5. Suction tin gun uses vacuum pump as the air source, strong suction and low noise.
6. Suction tin gun part is anti-static design, to prevent electrostatic damage to delicate SMD components.
7. Suction tin gun has a 10-minute fixed hibernation function. When no one is in use, the suction tin gun is at rest, After about 10 minutes, the suction tin gun will enter the hibernation state.
8. Using Ferro-alloy Suction tin gun holder, durable, avoid burns.

Warm reminder:
When using the suction tin gun, the display temperature flashes (preheating), only when the temperature reaches the set temperature, the display stops flashing and (beep) sounds (preheating is complete), the vacuum pump can work.

Parameters

Model:  201A
Input voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  90W
Weight:  4.5kg
Inner box size:  350*275*160mm
Packing quantity:  4 pieces / box
Outer packing size:  575*365*380mm
Suction tin gun
Working voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  90W
Display form:  LED digital (Resolution 1℃)
Heating element:  201A Ceramic heating core
Temperature range:  350℃－480℃
Temperature stability:  ±1℃
Type of air flow:  Vacuum pump
Suction Pressure:  0.05MPa
Noise:  Less than 45dB
Handle length:  About 100cm (Including handle line)


Standard Configuration
Host machine: 1 pcs
Suction tin gun handle (include 1.0mm Suction tip and heater): 1 pcs
Suction tin gun holder (include Cleaning sponge): 1 pcs
Suction tip: 1 pcs (1.2mm)
User manual: 1 pcs

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions

About the Suction tin gun
By heating the suction tip to conduct heat, causing the solder to heat up and melt. Then, the vacuum pump is used to suck the melted solder into the suction chamber, so as to achieve the diswelding of electronic components. This tool is often used to repair and assemble electronic equipment, especially where components need to be replaced or circuits repaired. It removes solder quickly and accurately, increasing work efficiency while also protecting circuit boards and other electronic components from damage.
1. Suitable for a variety of upright components and other special desoldering, especially suitable for more pin in-line components (such as transformers, LCD screens, digital tubes, integrated chips, pins, etc.) welding.

Related Names
Low Temperature Lead Free Soldering Tool | Electronics Soldering Device | Thermostat Soldering Station

]]> https://en.saikecn.com/product/201a/feed 0