Hot Air Soldering Station 3 IN 1 – SAIKE TOOL – Professional Hot Air Soldering Stations and Electronic Repair Equipment Supplier

SAIKE 8310D Hot air soldering station with Preheating station

SAIKE — Thu, 09 Nov 2023 14:50:27 +0000

Product Overview

SAIKE 8310D Hot air soldering station with Preheating station is a SAIKE repair tool for professional electronics repair work. 700W Hot air rework station, 60W Soldering station and 500W preheating station in one, brushless fan airflow, digital display for all main functions.

Model Position

Use this model when the buyer needs a repair bench tool matched to its voltage, plug type, quantity and application requirements.

Key Features

This product is a 3-in-1 multi-functional BGA repair equipment specially designed for repair bench requirements. It integrates the hot air gun, soldering station and Preheating station in one, with comprehensive functions, and provides a a practical workflow for daily repair work. The three functions also have independent switches, which can be used separately or simultaneously. It requires less bench space, practical and energy saving, performance has been further improved.
Each part of the equipment adopts an independent microcontroller, the hot air gun, the soldering iron and the Preheating station work independently, even if there is a problem in one way, it does not affect the normal work of the other way, and the high integrated circuit design greatly reduces the failure rate of the product.
PID temperature control tracks the working temperature quickly and supports fast temperature compensation.
The machine includes self-diagnosis and display/protection for over-temperature, short circuit, open circuit and overload faults.
A rear fuse holder and grounded metal parts help improve electrical safety.
The hot air gun heater uses the skeleton type ceramic heating core, and the the design supports stable operation and longer heater service life.
The handle of the hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the hot air gun can quickly enter the working state; Put the handle back on the handle frame, the hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
hot air gun uses a brushless fan as the air source, air volume is large, air volume is adjustable, gentle wind power and minimal noise.
Soldering iron uses 131A ceramic heating core, peak heating, rapid heating, and fast temperature compensation function. Therefore, it is very suitable for the desoldering of various solder joints, especially for the desoldering of large solder joints, rough blocks and miscellaneous difficult solder joints.
The soldering iron is designed with anti-static protection, to prevent electrostatic damage to sensitive SMD components.
Using Ferro-alloy Soldering iron seat, durable, avoid burns.
Preheating station is a professional maintenance equipment, specially designed circuit board telescopic clamp table, to assist the fixed circuit board for preheating and rapid dismantling. It is robust and durable, suitable for all types of circuit boards and components.
Preheating station is also equipped with efficient heating elements and a precise temperature control system, which allows the preheater to quickly raise the temperature and achieve the ideal de-soldering effect in a short time with the hot air gun. About the hot air gun fixed bracket It can also be Equipped a hot air gun bracket, without the need to hold a hot air gun, just place it on the hot air gun bracket, you can reduce the burden on the arms and hands, reducing the fatigue that may be caused by holding the hot air gun for a long time. At the same time, it ensures that the hot air gun is always in the correct position. Make you more focused on the welding work, without worrying about the stability of the hot air gun. This will give you more maneuverable space, allowing you to move and adjust the circuit board more freely to better access and handle the solder joints, which will facilitate your component dismantling work.

Component Function Notes

hot air gun

By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.

Suitable for various kinds of soldering or desoldering work of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Soldering Iron

The soldering iron transfers heat through the tip to melt solder for soldering and desoldering work.

Suitable for relatively larger solder joints or pads to provide enough heat for better completion of welding operations.
For thicker and larger solder joints and pads, you can try replacing the soldering iron tip with a larger contact area or use a hot air gun for welding.

Preheating Station

The preheating plate radiates heat, the circuit board is heated to the appropriate temperature, and this temperature is maintained so that the area around the electronic components on the circuit board reaches a predetermined temperature. This makes it possible to use a heat gun to quickly melt solder and dissolder electronic components. The preheating table helps to avoid the failure to reach the melting point of the solder due to rapid temperature loss, which makes it impossible to complete the desoldering of electronic components. The preheating platform not only improves the efficiency of the desoldering, but also guarantees the quality of the desoldering.

Suitable for auxiliary dismantling of large solder joints or pads, especially for heavy or large welding materials, and the presence of heat-absorbing parts such as metals around. It provides sufficient heat and is used in conjunction with a heat gun to better complete welding operations.

Technical Specifications

hot air gun
Model	8310D
Input voltage	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption	1210W
Weight	5.42kg
Inner box size	375355185mm
Packing quantity	4 pieces / box
Outer packing size	730386390mm
Working voltage	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption	700W
Display form	LED digital (Resolution 1℃)
Heating element	Skeleton type ceramic heating core
Temperature range	100℃－480℃
Temperature stability	±1℃
Type of air flow	brushless fan airflow
Gas flow	120 L/min(max)
Noise	Less than 45dB
Handle length	About 100cm (Including handle line)
Soldering iron
Working voltage	24V/AC
Rated power	22W
Power consumption	60W
Maximum power	120W
Display form	LED digital (Resolution 1℃)
Temperature range	200℃－480℃
Heating element	131A ceramic heating core
Temperature stability	±2℃(no load)
Handle length	About 100cm (Including handle line)
Preheating station
Working voltage	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption	500W
Display form	LED digital (Resolution 1℃)
Temperature range	50℃－400℃
Preheating area	120mm×120mm
Placement area	≤170mm×170mm
Temperature stability	±2℃(no load)

Standard Configuration

Host machine (include hot air gun handle): 1 pcs
hot air gun rack: 1 pcs
hot air gun fixed bracket: 1 pcs
Soldering iron handle (include iron tip and heater): 1 pcs
Soldering iron holder (include Cleaning sponge): 1 pcs
Nozzles: 4 pcs (5mm, 8mm, 10mm, 12*12mm)
User manual: 1 pcs

Typical Applications

Electronic product assembly
Product development in scientific research departments
Electronic products maintenance
Electrical soldering operation
electronics training and repair education

Order and Configuration Notes

Please confirm rated voltage, power plug, order quantity and accessory requirements before production or shipment. For distributor orders, repair shop bundles or accessory kits, contact SAIKE with the target models and quantity so we can confirm a suitable configuration.

SAIKE 863-30 Hot air soldering station with DC Power Supply 30V 5A

SAIKE — Thu, 09 Nov 2023 14:45:55 +0000

SAIKE 863-30 3 in 1 repair station

Hot air, soldering and 30V 5A power supply in one repair workstation

SAIKE 863-30 combines an 863D hot air rework station, 938D soldering station and 3005D DC regulated power supply for repair shops, PCB repair benches, phone repair and training rooms.

1000W hot air rework

85W soldering station

30V 5A DC output

Request Quote View Products

Three-module repair workstation for model confirmation and buyer reference.

Buyer fit

One workstation for repair benches that need three core tools

Use 863-30 when the buyer wants hot air rework, soldering operation and adjustable DC power output in one combined bench setup.

Repair shops

Suitable for phone repair, PCB repair, SMD rework, soldering work and powered circuit testing.

Distributors

A high-function model for catalog listings, sample orders and bulk repair bench quotations.

Training benches

Useful for teaching hot air rework, soldering operation and DC power supply diagnosis in one station.

Product details

Front panel, side structure and working setup

Use these images to confirm the panel layout, combined frame, handle placement and practical bench setup before quotation.

Core functions

Three independent modules for repair bench work

863D hot air rework

1000W hot air gun with compressor motor blower, strong wind pressure, high air volume and 100C-500C temperature range.

938D soldering station

85W soldering section with 938D ceramic heating core, rapid compensation, anti-static design and 10-minute hibernation.

3005D DC power supply

0-30V and 0-5A regulated DC output for phone repair, circuit board testing and electronic component diagnosis.

Component function guide

How each module is normally used on the repair bench

Hot air gun

Generates hot airflow to heat solder into a molten state for soldering, desoldering, component removal, heat shrinkage and preheating.

Suitable for SOIC, CHIP, QFP, PLCC, BGA, SMD and mobile phone wiring/base repair.

Soldering iron

Transfers heat through the soldering tip to melt solder for component welding and desoldering operations.

Suitable for larger solder joints or pads that need enough heat for better soldering results.

DC regulated power supply

Outputs adjustable DC voltage for circuit boards and electronic devices during testing, debugging and repair.

Supports fault diagnosis for phone repair and other electronic circuit maintenance work.

Operating details

Control, safety and module operation details

These details preserve the key operating logic buyers need to understand before choosing a higher-function repair station.

Independent module operation

863D hot air, 938D soldering and 3005D DC power supply are integrated into one combined workstation.
Each module works independently and can be used separately or simultaneously.
The combined design improves work efficiency while reducing separate bench setup needs.

Temperature control and protection

Microcomputer PID program control tracks the hot air gun and soldering iron temperature at high speed.
Fast temperature compensation improves stability and adapts to demanding repair environments.
Self-detection covers over-temperature, short circuit, open circuit and overload failure display/protection.

Hot air handle operation

The hot air handle enters working state when picked up from the holder.
Returning the handle stops heating, delays cold air cooling and then enters standby state.
The handle also supports one-click switching between cold air, hot air and standby.

Memory channels and power protection

The hot air gun stores three temperature and air volume channels for quick switching.
The soldering iron stores three temperature channels and has a fixed 10-minute hibernation function.
The DC power supply includes short circuit, over current and over temperature protection.

Configuration options

Quote the workstation alone or build it into a repair kit

Before quotation, confirm voltage version, plug type, order quantity, destination country and package requirement.

Standard

Standard package

Three host modules, composite frame, hot air holder, nozzle set, soldering handle, soldering holder, output cable and manual.

High function

3 in 1 workstation option

Use this model when the buyer wants hot air, soldering and regulated DC output in one bench system.

Repair shop

Repair bench kit

Add nozzles, soldering tips, spare handles, heating cores, output cables, solder wire, solder wick or desoldering tools according to the buyer’s repair work.

Distributor

Bulk order quote

Confirm voltage version, plug type, carton quantity, packaging requirement and destination country before quotation.

Typical applications

Where buyers can use this model

Electronic product assembly

Product development and research departments

Electronic product maintenance

Electrical repair operation

Skill training in electronic institutions

Phone repair, PCB rework and powered testing benches

Standard configuration

Physical items included in the package

Package items are listed separately from operation details so buyers can confirm what is included.

863D host machine with hot air gun handle: 1 pcs
938D host machine: 1 pcs
3005D host machine: 1 pcs
Composite frame: 1 pcs
Hot air gun holder: 1 pcs
Nozzles: 3 pcs (5mm, 8mm, 10mm) straight air outlet; 2 pcs (8mm, 10mm) spiral air outlet
Soldering iron handle with iron tip and heater: 1 pcs
Soldering iron holder with cleaning sponge and iron tip polishing box: 1 pcs
Power supply interface output cable: 1 pcs
User manual: 1 pcs

Technical specifications

Key parameters for buyer confirmation

Hot air gun (863D)
Model	863-30
Input voltage	220V-240V/AC, 50Hz
Power consumption	1270W
Weight	13.65kg
Inner box size	55555020mm
Packing quantity	1 piece / box
Outer packing size	55555020mm
Working voltage	220V-240V/AC, 50Hz
Power dissipation	1000W
Display form	LED digital, resolution 1C
Heating element	Skeleton type ceramic heating core
Temperature range	100C-500C
Temperature stability	+/-1C
Air flow type	Compressor motor blower
Gas flow	120 L/min max
Noise	Less than 45dB
Handle length	About 100cm including handle line
Soldering iron (938D)
Working voltage	24V/AC
Rated power	24W
Power consumption	85W
Maximum power	120W
Display form	LED digital, resolution 1C
Heating element	938D ceramic heating core
Temperature range	200C-480C
Temperature stability	+/-2C no load
Handle length	About 100cm including handle line
DC regulated power supply (3005D)
Working voltage	220V-240V/AC, 50Hz
Power consumption	150W
Output voltage	0-30V
Load current	0-5A

Optional add-on support

Accessories, consumables and spare parts support

For repair shops and distributors, list the workstation together with compatible spare parts, working accessories and daily consumables so buyers know how to maintain and restock the model after purchase.

Available add-on support. Tell us your repair work, quantity and restocking needs, and we can help match suitable spare parts, accessories or consumables with the machine.

Model support parts

Useful for after-sales service, accessory restocking and model-specific order confirmation.

863-series hot air nozzle set
938D-series soldering tip options
DC test probes and output connector cable
Module-specific service parts can be confirmed before bulk order

Straight nozzle 10mm

938D K tip

Test probes

Working accessories

Confirm nozzle, tip, output cable and holder compatibility by model before bulk order.

Straight air nozzles: 5mm, 8mm, 10mm
Spiral air nozzles: 8mm, 10mm
Soldering tips for different contact areas
Power supply output cable or test leads

Straight nozzle 5mm

Straight nozzle 8mm

Spiral nozzle 8mm

Connector cable

938D I tip

938D 3C tip

Recommended consumables

Offer these as optional add-on items for repair bench restocking and starter kits.

Solder wire
Solder wick
Desoldering pump
Cleaning sponge / brass wire

Solder wire

Solder wick

Desoldering pump

Need 863-30 for repair shop, distributor or bulk order?

Send your required voltage, plug type, quantity and destination country. We can help confirm package options and quotation details.

Request Quote

SAIKE 909D++ Hot air soldering station with DC Power Supply 15V 2A

SAIKE — Thu, 09 Nov 2023 14:39:19 +0000

SAIKE 909D++ 3 in 1 rework station

Hot air, soldering and 15V 2A DC power supply in one repair workstation

SAIKE 909D++ is designed for repair shops, distributors and service teams that need a compact bench station for PCB repair, phone repair and daily electronics maintenance.

700W hot air rework

Soldering station

15V 2A DC output

Request Quote View Products

Front product view for model confirmation and buyer reference.

Buyer fit

Built for buyers who want one bench unit instead of separate tools

Use this model when the buyer needs hot air rework, soldering and low-voltage DC test output in one compact repair workstation.

Repair shops

One station covers common hot air, soldering and low-voltage DC test work on a compact bench.

Distributors

A clear 3 in 1 model for catalog listings, retail packages and bulk quotation inquiries.

Service teams

Suitable for phone repair, PCB rework, electronics maintenance and training bench scenarios.

Product video

See the 909D++ powered on and ready for bench work

The short video helps buyers confirm the real product appearance, powered front panel and bench setup before sending an inquiry.

Front panel display and control layout shown with power on.
Hot air handle, soldering handle and DC output area visible in one bench setup.
Useful for confirming model appearance before repair shop or distributor quotation.

Real 909D++ product video for checking appearance, panel layout and bench setup.

Core functions

Three repair functions on one panel

Hot air rework

For SMD rework, heat shrink, component removal, preheating and general repair bench heating tasks. The hot air handle uses a brushless fan and ceramic heating core.

Soldering station

For daily soldering work, PCB repair and accessory kit matching. The soldering part uses a 131A ceramic heating core and anti-static design.

DC regulated power supply

For low-voltage testing and repair diagnostics. The 0-15V / 0-2A output can support mobile phone repair and electronic circuit checking.

Operating details

Control, safety and component operation details

Review the control logic, protection design and practical operating details for hot air rework, soldering and DC power testing.

System control and safety

Hot air, soldering iron and DC power supply have independent switches, so they can be used separately or at the same time.
Each function uses independent microcontroller control. If one section needs service, the other sections can still be used normally.
High integrated circuit design helps reduce failure risk and improves long-term stability.
PID temperature control tracks working temperature quickly and supports fast temperature compensation.
Self-diagnosis and display protection cover over-temperature, short circuit, open circuit and overload faults.
Rear fuse holder and grounded metal parts help improve electrical safety.

Hot air gun operation

Skeleton type ceramic heating core supports stable heating and longer heater service life.
Handle induction device lets the hot air gun enter working state when picked up from the holder.
When the handle is returned to the holder, heating stops, cold air is blown for cooling, and the unit enters standby state.
Brushless fan air source provides large adjustable airflow, soft wind and low noise.
Automatic mode cools and enters standby when the handle is placed on the holder.
Manual mode keeps frequent hot air work faster by reducing repeated heating time.

Soldering iron operation

131A ceramic heating core supports peak heating, rapid heating and fast temperature compensation.
Suitable for soldering and desoldering work on small pads, daily PCB repair and service bench tasks.
For large solder joints, rough blocks and difficult solder joints, use a larger contact-area tip or combine with hot air support.
Anti-static protection helps reduce electrostatic damage risk for sensitive SMD components.
Ferro-alloy soldering iron holder improves durability and helps prevent burns during bench work.

DC power supply and testing

0-15V / 0-2A DC output supports low-voltage repair testing, component checking and fault diagnosis.
Continuous short-circuit protection and recovery function help protect the load during abnormal operation.
The DC supply can output or measure DC voltage for circuit boards and electronic devices.
USB output port supports convenient connection of mobile phones and communication devices.
High-precision 4-digit LED current display shows output current down to 1mA.

Component function guide

How each section is normally used on the repair bench

Hot air gun

Generates hot airflow to heat solder into a molten state for soldering, desoldering, heat shrinkage and component removal.

Suitable for SOIC, CHIP, QFP, PLCC, BGA, SMD and mobile phone repair tasks. It can also be used for drying, paint removal, adhesion removal, thawing, preheating and glue welding.

Soldering iron

Transfers heat through the soldering tip to melt solder for soldering and desoldering work.

Suitable for small solder joints, thin welding materials and pads without large heat-absorbing metal parts nearby. For larger joints, match a larger tip or use hot air support.

DC regulated power supply

Outputs and measures DC voltage for component testing, circuit board debugging and repair fault judgment.

Provides stable DC voltage for circuit boards and electronic devices during testing, repair confirmation and troubleshooting.

Configuration options

Quote the product alone or build it into a repair kit

Before quotation, confirm voltage version, plug type, order quantity, destination country and package requirement.

Standard

Standard package

Host machine, hot air gun rack, soldering iron handle, soldering iron holder, nozzles, test cable, multimeter pen and user manual.

Repair shop

Repair bench kit

Add suitable soldering tips, nozzles, solder wire, solder wick or cleaning accessories according to the buyer’s repair work.

Distributor

Bulk order quote

Confirm voltage version, plug type, carton quantity, packaging requirement and destination country before quotation.

Typical applications

Where buyers can use this model

Electronic product assembly

Product development and research departments

Electronic product maintenance

Electrical soldering operation

Electronics training and repair education

Phone repair and PCB rework benches

Standard configuration

Physical items included in the package

Package items are listed separately from operation details so buyers can confirm what is included.

Host machine with hot air gun handle: 1 pcs
Hot air gun rack: 1 pcs
Soldering iron handle with tip and heater: 1 pcs
Soldering iron holder with cleaning sponge: 1 pcs
Nozzles: 4 pcs (5mm, 8mm, 10mm, 12*12mm)
Power supply interface test cable: 1 pcs
Multimeter pen: 1 pcs
User manual: 1 pcs

Technical specifications

Key parameters for buyer confirmation

Hot air gun
Model	909D++
Input voltage	220V-240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption	800W
Weight	4.65kg
Inner box size	320270200mm
Packing quantity	4 pieces / box
Outer packing size	56034537mm
Working voltage	220V-240V/AC, 50Hz (110V/AC, 60Hz)
Power dissipation	700W
Display form	LED digital, resolution 1℃
Heating element	Skeleton type ceramic heating core
Temperature range	100℃-480℃
Temperature stability	±1℃
Air flow type	Brushless fan soft wind
Gas flow	120 L/min max
Noise	Less than 45dB
Handle length	About 100cm including handle line
Soldering iron
Working voltage	24V/AC
Rated power	22W
Power consumption	60W
Maximum power	120W
Display form	LED digital, resolution 1℃
Heating element	131A ceramic heating core
Temperature range	200℃-480℃
Temperature stability	±2℃ no load
Handle length	About 100cm including handle line
DC regulated power supply
Working voltage	220V-240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption	30W
Output voltage	0-15V
Load current	0-2A
Output display	4-digit LED current display, accurate to 1mA
Protection	Continuous short-circuit protection and recovery function
Extra output	USB output port

Optional add-on support

Accessories, consumables and spare parts support

Repair shops and distributors often care about what happens after the machine is sold. SAIKE can help match compatible spare parts, working accessories and common consumables, so buyers can support long-term use and future restocking.

Available add-on support. Tell us your repair work, quantity and restocking needs, and we can help match suitable spare parts, accessories or consumables with the machine.

Replacement parts

For maintenance, replacement and distributor after-sales support.

Hot air gun handle
Soldering iron handle
Hot air heating element
Soldering iron heating element
Fuse, power cord and common replacement parts

Hot air handle

Soldering handle

Hot air heater

Solder heater

Working accessories

For different soldering, rework and bench repair tasks.

Hot air nozzles: 5mm, 8mm, 10mm and 12 x 12mm
Compatible soldering tips
Hot air gun rack
Soldering iron holder with cleaning sponge
Power supply test cable and multimeter pen

5mm nozzle

8mm nozzle

10mm nozzle

900M-T tips

Test probes

Connector cable

Recommended consumables

Offer these as optional add-on items for repair bench restocking and starter kits.

Solder wire
Solder wick
Cleaning sponge / brass wire
Soldering tip refresher or repair box

Solder wire

Solder wick

Cleaning sponge

Desoldering pump

Need 909D++ for repair shop, distributor or bulk order?

Send your required voltage, plug type, quantity and destination country. We can help confirm package options and quotation details.

Request Quote

SAIKE 909D+ Hot air soldering station with DC Power Supply 15V 3A

SAIKE — Thu, 09 Nov 2023 14:36:45 +0000

Product Overview

SAIKE 909D+ is a 3 in 1 repair station with hot air rework, soldering and a higher-current DC regulated power supply. It is aimed at repair shops that need the same compact workstation format with more DC output capacity.

Model Position

Choose this version when the repair bench needs the 909D workflow but a stronger DC supply for testing and maintenance.

Key Features

This model is a multifunctional repair workstation for professional electronics service benches. It integrates hot air gun, soldering iron and DC regulated power supply. It has comprehensive functions and provides a practical workflow for daily repair work. The three functions also have independent switches, which can be used separately or simultaneously. It requires less bench space, practical and saves power, further improves performance.
Each part of the equipment adopts an independent microcontroller, the hot air gun, the soldering iron and the DC regulated power supply work independently, even if there is a problem in one way, it does not affect the normal work of the other way, and the high integrated circuit design greatly reduces the failure rate of the product.
PID temperature control tracks the working temperature quickly and supports fast temperature compensation.
The machine includes self-diagnosis and display/protection for over-temperature, short circuit, open circuit and overload faults.
A rear fuse holder and grounded metal parts help improve electrical safety.
The hot air gun heater uses the skeleton type ceramic heating core, and the the design supports stable operation and longer heater service life.
The handle of the hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the hot air gun can quickly enter the working state; Put the handle back on the handle frame, the hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
hot air gun uses a brushless fan as the air source, air volume is large, air volume is adjustable, gentle wind power and minimal noise.
Soldering iron uses 131A ceramic heating core, peak heating, rapid heating, and fast temperature compensation function. Therefore, it is very suitable for the desoldering of various solder joints, especially for the desoldering of large solder joints, rough blocks and miscellaneous difficult solder joints.
The soldering iron is designed with anti-static protection, to prevent electrostatic damage to sensitive SMD components.
Using Ferro-alloy Soldering iron seat, durable, avoid burns.
DC regulated power supply part is equipped with continuous short-circuit protection and recovery function to help protect the load during short-circuit or abnormal operating conditions.
DC regulated voltage power supply can output or measure DC voltage, not only as a mobile phone repair power supply, but also can be used to check and repair other electronic circuits or components.

Component Function Notes

hot air gun

By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.

Suitable for various kinds of soldering or desoldering work of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Soldering Iron

The soldering iron transfers heat through the tip to melt solder for soldering and desoldering work.

Suitable for small solder joints or pads, such as thinner, smaller welding materials, no surrounding metal and other heat-absorbing parts.
For relatively thick and large solder joints and pads, you can try replacing the soldering iron tip with a larger contact area or use a hot air gun for welding.

DC regulated Power Supply

The DC power supply can output and measure DC voltage for component testing and fault diagnosis.

The DC regulated power supply can provide reliable DC voltage for circuit boards and electronic devices to ensure their normal operation and stability, to facilitate debugging, testing or repair and other fault judgment.

Technical Specifications

hot air gun
Model	909D+
Input voltage	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption	850W
Weight	4.9kg
Inner box size	320270200mm
Packing quantity	4 Piece / boxes
Outer packing size	56034537mm
Working voltage	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power dissipation	700W
Display form	LED digital (Resolution 1℃)
Heating element	Skeleton type ceramic heating core
Temperature range	100℃－480℃
Temperature stability	±1℃
Type of air flow	brushless fan airflow
Gas flow	120 L/min(max)
Noise	Less than 45dB
Handle length	About 100cm(Including handle line)
Soldering iron
Working voltage	24V/AC
Rated power	22W
Power consumption	60W
Maximum power	120W
Display form	LED digital (Resolution 1℃)
Heating element	131A ceramic heating core
Temperature range	200℃－480℃
Temperature stability	±2℃(no load)
Handle length	About 100cm(Including handle line)
DC regulated power supply
Working voltage	220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption	45W
Output voltage	0-15V
Load current	0-3A

Standard Configuration

Host machine (include hot air gun handle): 1 pcs
hot air gun rack: 1 pcs
Soldering iron handle (include iron tip and heater): 1 pcs
Soldering iron holder (include Cleaning sponge): 1 pcs
Nozzles: 4 pcs (5mm, 8mm, 10mm, 12*12mm)
Power supply interface Test cable: 1 pcs
Multimeter pen: 1 pcs
User manual: 1 pcs

Typical Applications

Electronic product assembly
Product development in scientific research departments
Electronic products maintenance
Electrical soldering operation
electronics training and repair education

Order and Configuration Notes

SAIKE 909D Hot air soldering station with DC Power Supply 15V 1A

SAIKE — Thu, 09 Nov 2023 04:40:15 +0000

SAIKE 909D 3 in 1 rework station

Hot air, soldering and 15V 1A DC power supply in one bench unit

SAIKE 909D is a compact 3 in 1 repair workstation for electronics repair shops, PCB rework, phone repair, SMD rework and training benches.

700W hot air rework

45W soldering station

15V 1A DC output

Request Quote View Products

Product image for model confirmation and buyer reference.

Buyer fit

One compact workstation for common repair bench work

Use 909D when the buyer needs hot air rework, soldering and low-voltage DC testing in one practical bench unit.

Repair shops

Suitable for phone repair, PCB repair, SMD rework and daily electronics service work.

Distributors

A clear 3 in 1 model for catalog listings, sample orders and bulk quotation inquiries.

Training benches

Combines hot air, soldering and DC output for repair education and practical bench training.

Product video

See the 909D powered on for repair bench use

The video helps buyers check the real product appearance, front panel layout, handle setup and workbench scale before inquiry.

Shows the real 909D machine and operating panel.
Helps confirm hot air, soldering and DC power supply layout.
Useful for repair shop, distributor and sample-order discussions.

Real 909D product video for checking appearance, panel layout and bench setup.

Product details

Front panel, side structure and bench setup

Use these images to confirm product structure, handle placement and the practical package direction before quoting.

Core functions

Three repair functions with independent control

Hot air rework

700W hot air gun with skeleton type ceramic heating core, brushless fan, adjustable airflow, soft wind and low noise.

Soldering station

45W soldering section with LED digital display, 132A ceramic heating core, rapid warming and anti-static design.

DC regulated power supply

0-15V / 0-1A DC output for mobile phone repair, circuit checking, component testing and repair fault judgment.

Operating details

Control, safety and component operation details

Review the control logic, protection design and practical operating details for hot air rework, soldering and DC power testing.

System control and safety

Hot air, soldering iron and DC power supply have independent switches and can be used separately or simultaneously.
Each section uses independent microcontroller control, so one section does not affect the normal work of the others.
High integrated circuit design helps reduce product failure rate.
PID program control tracks actual hot air and soldering iron temperature in milliseconds.
Self-detection includes over-temperature, short circuit, open circuit and overload display/protection.
Rear fuse holder and grounded exposed metal parts improve electrical safety.

Hot air gun operation

Skeleton type ceramic heating core improves reliability, stability and working life.
Handle induction device lets the hot air gun quickly enter working state when picked up from the holder.
When the handle is returned to the holder, heating stops, cold air is blown for cooling, and the unit enters standby state.
Brushless fan air source provides large adjustable airflow, gentle wind power and minimal noise.

Soldering iron operation

132A ceramic heating core supports stable heating, rapid warming, reduced loss and long service life.
Anti-static design helps prevent electrostatic damage to delicate SMD components.
Suitable for small solder joints, pads, thinner welding materials and daily soldering work.
For thick or large solder joints, use a larger contact-area tip or hot air support.

DC power supply and testing

0-15V / 0-1A DC output supports mobile phone repair and electronic circuit checking.
Continuous short-circuit protection and recovery function helps avoid unexpected load damage.
The DC power supply can output or measure DC voltage for component testing and fault diagnosis.
Provides stable DC voltage for circuit boards and electronic devices during debugging, testing and repair judgment.

Component function guide

How each section is normally used on the repair bench

Hot air gun

Generates hot airflow to heat solder into a molten state for soldering, desoldering, heat shrinkage, component removal and preheating work.

Suitable for SOIC, CHIP, QFP, PLCC, BGA, SMD and mobile phone wiring/base repair. It can also be used for drying, paint removal, adhesion removal, thawing and glue welding.

Soldering iron

Transfers heat through the soldering tip to melt solder for soldering and desoldering electronic components.

Best for small solder joints, pads and thinner welding materials. For larger joints, match a larger tip or use hot air support.

DC regulated power supply

Outputs and measures DC voltage for component testing, circuit debugging and fault diagnosis.

Provides reliable DC voltage for circuit boards and electronic devices during repair confirmation and troubleshooting.

Configuration options

Quote the product alone or build it into a repair kit

Before quotation, confirm voltage version, plug type, order quantity, destination country and package requirement.

Standard

Standard package

Host machine, hot air gun rack, soldering iron handle, soldering iron holder, nozzles, test cable, multimeter pen and user manual.

Repair shop

Repair bench kit

Add suitable soldering tips, nozzles, solder wire, solder wick or cleaning accessories according to the buyer’s repair work.

Distributor

Bulk order quote

Confirm voltage version, plug type, carton quantity, packaging requirement and destination country before quotation.

Typical applications

Where buyers can use this model

Electronic product assembly

Product development and research departments

Electronic product maintenance

Electrical soldering operation

Skill training in electronic institutions

Phone repair and PCB rework benches

Standard configuration

Physical items included in the package

Package items are listed separately from operation details so buyers can confirm what is included.

Host machine with hot air gun handle: 1 pcs
Hot air gun rack: 1 pcs
Soldering iron handle with tip and heater: 1 pcs
Soldering iron holder with cleaning sponge: 1 pcs
Nozzles: 4 pcs (5mm, 8mm, 10mm, 12*12mm)
Power supply interface test cable: 1 pcs
Multimeter pen: 1 pcs
User manual: 1 pcs

Technical specifications

Key parameters for buyer confirmation

Hot air gun
Model	909D
Input voltage	220V-240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption	760W
Weight	4.21kg
Inner box size	320270200mm
Packing quantity	4 pieces / box
Outer packing size	56034537mm
Working voltage	220V-240V/AC, 50Hz (110V/AC, 60Hz)
Power dissipation	700W
Display form	LED digital, resolution 1C
Heating element	Skeleton type ceramic heating core
Temperature range	100C-480C
Temperature stability	+/-1C
Air flow type	Brushless fan soft wind
Gas flow	120 L/min max
Noise	Less than 45dB
Handle length	About 100cm including handle line
Soldering iron
Working voltage	24V/AC
Power consumption	45W
Display form	LED digital, resolution 1C
Heating element	132A ceramic heating core
Temperature range	200C-480C
Temperature stability	+/-2C no load
Handle length	About 100cm including handle line
DC regulated power supply
Working voltage	220V-240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption	15W
Output voltage	0-15V
Load current	0-1A
Protection	Continuous short-circuit protection and recovery function

Optional add-on support

Accessories, consumables and spare parts support

For repair shops and distributors, list the machine together with compatible spare parts, working accessories and daily consumables so buyers know how to maintain and restock the model after purchase.

Available add-on support. Tell us your repair work, quantity and restocking needs, and we can help match suitable spare parts, accessories or consumables with the machine.

Replacement parts

Useful for after-sales service and long-term repair bench operation.

Hot air handle
Soldering iron handle
Hot air heating core
132A soldering iron heating core

Hot air handle

Soldering handle

Solder heater

Working accessories

Confirm nozzle, tip and holder compatibility by model before bulk order.

Hot air nozzles
Soldering tips
DC test leads
Soldering iron holder and cleaning sponge

10mm nozzle

900M-T tips

Test probes

Recommended consumables

Offer these as optional add-on items for repair bench restocking and starter kits.

Solder wire
Solder wick
Cleaning sponge / brass wire
Soldering tip refresher or repair box

Solder wire

Solder wick

Cleaning sponge

Need 909D for repair shop, distributor or bulk order?

Send your required voltage, plug type, quantity and destination country. We can help confirm package options and quotation details.

Request Quote