Hot Air Soldering Station 2 IN 1 – SAIKE TOOL – Professional Hot Air Soldering Stations and Electronic Repair Equipment Supplier https://en.saikecn.com Efficient and Reliable Electronic Repair Solutions - Enhance Your Repair Efficiency, Ensuring Optimal Device Performance Fri, 19 Jun 2026 16:59:46 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://en.saikecn.com/wp-content/uploads/2023/10/ICO-66x66.jpg Hot Air Soldering Station 2 IN 1 – SAIKE TOOL – Professional Hot Air Soldering Stations and Electronic Repair Equipment Supplier https://en.saikecn.com 32 32 SAIKE 852D+ Hot air soldering station https://en.saikecn.com/product/852d-plus https://en.saikecn.com/product/852d-plus#respond Thu, 09 Nov 2023 04:35:54 +0000 https://en.saikecn.com/?post_type=product&p=812 700W hot air rework station and 40W soldering station in one repair workstation. A practical 2 in 1 option for electronics repair shops, PCB rework and training benches.

  • Hot air rework plus soldering station in one unit
  • Brushless fan soft air design for stable rework tasks
  • Suitable for SMD repair, phone repair and maintenance workshops
Need this model for repair shop, distributor or bulk order?
Send us the required voltage, plug type, quantity and package requirement. We can help confirm standard package, accessory kit and quotation details.
Request Quote
Technical Support
]]>

Product Overview

SAIKE 852D+ is a 2 in 1 hot air rework and soldering station designed for phone repair, PCB maintenance, SMD soldering and training benches.

Model Position

Use this model for repair benches that need a stable hot air gun and soldering iron in one machine.

Key Features

  • PID temperature control tracks the working temperature quickly and supports fast temperature compensation.
  • The machine includes self-diagnosis and display/protection for over-temperature, short circuit, open circuit and overload faults.
  • A rear fuse holder and grounded metal parts help improve electrical safety.
  • The hot air gun heater uses the skeleton type ceramic heating core, and the the design supports stable operation and longer heater service life.
  • The handle of the hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the hot air gun can quickly enter the working state; Put the handle back on the handle frame, the hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
  • hot air gun uses a brushless fan as the air source, air volume is large, air volume is adjustable, gentle wind power and minimal noise.
  • Soldering iron uses 132A ceramic heating core, stable heating, rapid warming, reduce loss, long service life.
  • The soldering iron is designed with anti-static protection, to prevent electrostatic damage to sensitive SMD components.

Component Function Notes

hot air gun

By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.

  • Suitable for various kinds of soldering or desoldering work of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
  • Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Soldering Iron

The soldering iron transfers heat through the tip to melt solder for soldering and desoldering work.

  • Suitable for small solder joints or pads, such as thinner, smaller welding materials, no surrounding metal and other heat-absorbing parts.
  • For relatively thick and large solder joints and pads, you can try replacing the soldering iron tip with a larger contact area or use a hot air gun for welding.

Technical Specifications

Model 852D+
Input voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 740W
Weight 3.45kg
Inner box size 330*274*204mm
Packing quantity 6 pieces / box
Outer packing size 570*350*625mm
hot air gun
Working voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 700W
Display form LED digital (Resolution 1℃)
Heating element Skeleton type ceramic heating core
Temperature range 100℃－500℃
Temperature stability ±1℃
Type of air flow brushless fan airflow
Gas flow 120 L/min(max)
Noise Less than 45dB
Handle length About 100cm(Including handle line)
Soldering iron
Working voltage 24V/AC
Power consumption 40W
Display form LED digital (Resolution 1℃)
Temperature range 200℃－500℃
Heating element 132A ceramic heating core
Temperature stability ±2℃(no load)
Handle length About 100cm(Including handle line)

Standard Configuration

  • Host machine (include hot air gun handle): 1 pcs
  • hot air gun rack: 1 pcs
  • Soldering iron handle (include iron tip and heater): 1 pcs
  • Soldering iron holder (include Cleaning sponge): 1 pcs
  • Nozzles: 4 pcs (5mm, 8mm, 10mm, 12*12mm)
  • User manual: 1 pcs

Typical Applications

  • Electronic product assembly
  • Product development in scientific research departments
  • Electronic products maintenance
  • Electrical soldering operation
  • electronics training and repair education

Order and Configuration Notes

Please confirm rated voltage, power plug, order quantity and accessory requirements before production or shipment. For distributor orders, repair shop bundles or accessory kits, contact SAIKE with the target models and quantity so we can confirm a suitable configuration.

]]> https://en.saikecn.com/product/852d-plus/feed 0 SAIKE 852D+ Hot air soldering station Air pump type https://en.saikecn.com/product/852d-plus-air-pump https://en.saikecn.com/product/852d-plus-air-pump#respond Thu, 09 Nov 2023 04:34:39 +0000 https://en.saikecn.com/?post_type=product&p=811 600W hot air rework station and 40W soldering station with air pump airflow. Suitable for repair users who prefer stronger air pressure for rework and component removal tasks.

  • Air pump type hot air station with soldering function
  • Strong airflow for PCB rework and component heating
  • For repair shops, service benches and electronics maintenance
Need this model for repair shop, distributor or bulk order?
Send us the required voltage, plug type, quantity and package requirement. We can help confirm standard package, accessory kit and quotation details.
Request Quote
Technical Support
]]>

Product Overview

SAIKE 852D+ Air Pump is a 2 in 1 hot air rework and soldering station using an air pump hot air structure for electronics repair, SMD rework and service benches.

Model Position

Use this model when the customer needs hot air and soldering functions with an air pump hot air source.

Key Features

  • PID temperature control tracks the working temperature quickly and supports fast temperature compensation.
  • The machine includes self-diagnosis and display/protection for over-temperature, short circuit, open circuit and overload faults.
  • A rear fuse holder and grounded metal parts help improve electrical safety.
  • The hot air gun heater uses the skeleton type ceramic heating core, and the the design supports stable operation and longer heater service life.
  • hot air gun has the function of delay blowing cold air and automatic cooling. When the hot air gun switch is turned off, the hot air gun will stop heating. If the temperature is too high, the cold air will delay closing. It stops blowing after the temperature drops, thus extending the service life of the hot air gun.
  • hot air gun uses the air pump as the air source, the air flow pressure is large, and the silencer box is attached to reduce the noise.
  • Soldering iron uses 132A ceramic heating core, stable heating, rapid warming, reduce loss, long service life.
  • The soldering iron is designed with anti-static protection, to prevent electrostatic damage to sensitive SMD components. Note: Before using the new machine for the first time, please remove the air pump lock screw at the bottom of the main engine before using it. This is to prevent the air pump from shaking off during transportation, and smashing the internal circuit, so the bottom is locked by the screw, and it needs to be removed when used, so that the air pump can operate normally. Otherwise, the air pump can not vibrate normally, resulting in great noise and damage to the machine.

Component Function Notes

hot air gun

By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.

  • Suitable for various kinds of soldering or desoldering work of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
  • Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Soldering Iron

The soldering iron transfers heat through the tip to melt solder for soldering and desoldering work.

  • Suitable for small solder joints or pads, such as thinner, smaller welding materials, no surrounding metal and other heat-absorbing parts.
  • For relatively thick and large solder joints and pads, you can try replacing the soldering iron tip with a larger contact area or use a hot air gun for welding.

Technical Specifications

Model 852D+ (Air pump type)
Input voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 660W
Weight 4.18kg
Inner box size 330*274*204mm
Packing quantity 4 pieces / box
Outer packing size 560*345*370mm
hot air gun
Working voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 600W
Display form LED digital (Resolution 1℃)
Heating element Skeleton type ceramic heating core
Temperature range 100℃－500℃
Temperature stability ±1℃
Type of air flow Air pump
Gas flow 24 L/min(max)
Noise Less than 45dB
Handle length About 100cm(Including handle line)
Soldering iron
Working voltage 24V/AC
Power consumption 40W
Display form LED digital (Resolution 1℃)
Temperature range 200℃－500℃
Heating element 132A ceramic heating core
Temperature stability ±2℃(no load)
Handle length About 100cm(Including handle line)

Standard Configuration

  • Host machine (include hot air gun handle): 1 pcs
  • hot air gun rack: 1 pcs
  • Soldering iron handle (include iron tip and heater): 1 pcs
  • Soldering iron holder (include Cleaning sponge): 1 pcs
  • Nozzles: 3 pcs (5mm, 8mm, 10mm)
  • User manual: 1 pcs

Typical Applications

  • Electronic product assembly
  • Product development in scientific research departments
  • Electronic products maintenance
  • Electrical soldering operation
  • electronics training and repair education

Order and Configuration Notes

Please confirm rated voltage, power plug, order quantity and accessory requirements before production or shipment. For distributor orders, repair shop bundles or accessory kits, contact SAIKE with the target models and quantity so we can confirm a suitable configuration.

]]> https://en.saikecn.com/product/852d-plus-air-pump/feed 0 SAIKE 952D Hot air soldering station https://en.saikecn.com/product/952d https://en.saikecn.com/product/952d#respond Thu, 09 Nov 2023 04:32:28 +0000 https://en.saikecn.com/?post_type=product&p=810 700W hot air rework station and 60W soldering station in one bench unit. Suitable for repair shops and service businesses that need stable hot air rework plus soldering operation in one compact workstation.

  • 2 in 1 hot air and soldering station design
  • Digital display for hot air and soldering operation
  • For PCB repair, SMD rework, phone repair and workshop benches
Need this model for repair shop, distributor or bulk order?
Send us the required voltage, plug type, quantity and package requirement. We can help confirm standard package, accessory kit and quotation details.
Request Quote
Technical Support
]]> /* SAIKE 952D landing page CSS */ :root { --saike-navy: #1E3A5F; --saike-deep: #102942; --saike-orange: #FF7A00; --saike-ink: #172133; --saike-muted: #637083; --saike-bg: #F5F7FA; --saike-line: #D8E2EC; --saike-white: #FFFFFF; } .single-product.postid-810 .saike-product-detail { display: none !important; } .saike-landing-952d { width: 100%; background: #fff; color: var(--saike-ink); font-family: Arial, Helvetica, sans-serif; line-height: 1.6; letter-spacing: 0; } .saike-landing-952d * { box-sizing: border-box; } .saike-landing-952d a { color: inherit; text-decoration: none; } .saike-lp-wrap { width: min(1180px, calc(100% - 40px)); margin: 0 auto; } .saike-lp-hero { background: radial-gradient(circle at 78% 22%, rgba(47,111,237,.35), transparent 34%), linear-gradient(135deg, #10243d 0%, #1E3A5F 52%, #143f68 100%); color: #fff; } .saike-lp-hero-inner { display: grid; grid-template-columns: minmax(0, 1fr) minmax(340px, 470px); gap: 52px; align-items: center; padding: 64px 0; } .saike-lp-eyebrow { margin: 0 0 14px; color: var(--saike-orange); font-size: 13px; font-weight: 800; letter-spacing: .08em; text-transform: uppercase; } .saike-lp-hero h1, .saike-lp-section h2, .saike-lp-quote h2 { letter-spacing: 0; } .saike-lp-hero h1 { max-width: 720px; margin: 0; color: #fff; font-size: clamp(40px, 4.5vw, 60px); line-height: 1.06; } .saike-lp-lead { max-width: 690px; margin: 22px 0 0; color: rgba(255,255,255,.84); font-size: 19px; } .saike-lp-points { display: grid; grid-template-columns: repeat(3, minmax(0, 1fr)); gap: 12px; margin: 30px 0; max-width: 700px; } .saike-lp-point { border: 1px solid rgba(255,255,255,.22); border-radius: 7px; padding: 14px 16px; background: rgba(255,255,255,.08); font-size: 14px; font-weight: 800; } .saike-lp-actions { display: flex; flex-wrap: wrap; gap: 12px; } .saike-lp-btn { display: inline-flex; align-items: center; justify-content: center; min-height: 48px; border-radius: 7px; padding: 0 22px; font-weight: 800; text-decoration: none !important; } .saike-lp-btn.primary { background: var(--saike-orange); color: #fff !important; } .saike-lp-btn.secondary { border: 1px solid #cbd8e5; background: #fff; color: #17345a !important; } .saike-lp-hero-media img { display: block; width: 100%; border-radius: 8px; background: #fff; box-shadow: 0 24px 80px rgba(0,0,0,.25); } .saike-lp-media-note { margin: 12px 0 0; color: rgba(255,255,255,.78); font-size: 13px; } .saike-lp-section { padding: 70px 0; } .saike-lp-section.light { background: var(--saike-bg); } .saike-lp-head { max-width: 840px; margin-bottom: 32px; } .saike-lp-head h2, .saike-lp-section h2 { margin: 0; color: var(--saike-ink); font-size: clamp(30px, 3vw, 42px); line-height: 1.14; } .saike-lp-head p, .saike-lp-section p { color: var(--saike-muted); } .saike-lp-grid-3, .saike-lp-kit-grid, .saike-lp-spec-grid, .saike-lp-detail-grid, .saike-lp-function-grid, .saike-lp-support-grid, .saike-lp-application-grid { display: grid; gap: 18px; } .saike-lp-grid-3 { grid-template-columns: repeat(3, minmax(0, 1fr)); } .saike-lp-card, .saike-lp-kit, .saike-lp-note-card, .saike-lp-detail-card, .saike-lp-function-card, .saike-lp-support-card { border: 1px solid var(--saike-line); border-radius: 8px; background: #fff; padding: 24px; } .saike-lp-card h3, .saike-lp-kit h3, .saike-lp-note-card h3, .saike-lp-detail-card h3, .saike-lp-function-card h3, .saike-lp-support-card h3 { margin: 0 0 10px; color: var(--saike-navy); font-size: 21px; line-height: 1.3; } .saike-lp-card p, .saike-lp-kit p, .saike-lp-note-card p, .saike-lp-detail-card p, .saike-lp-function-card p, .saike-lp-support-card p { margin: 0; } .saike-lp-detail-grid { grid-template-columns: repeat(2, minmax(0, 1fr)); align-items: stretch; } .saike-lp-detail-card { border-left: 5px solid var(--saike-orange); } .saike-lp-detail-card ul { display: grid; gap: 10px; margin: 14px 0 0; padding-left: 18px; color: #39475c; } .saike-lp-detail-card li::marker { color: var(--saike-orange); } .saike-lp-function-grid { grid-template-columns: repeat(3, minmax(0, 1fr)); } .saike-lp-function-card { background: #fbfdff; } .saike-lp-function-card p + p { margin-top: 12px; } .saike-lp-support-grid { grid-template-columns: repeat(3, minmax(0, 1fr)); } .saike-lp-addon-section { border-top: 1px solid #dce6f1; border-bottom: 1px solid #dce6f1; background: linear-gradient(180deg, #f7f9fc 0%, #eef3f8 100%); } .saike-lp-addon-note { margin: -10px 0 24px; border-left: 4px solid var(--saike-orange); border-radius: 6px; background: #fff8ef; padding: 14px 16px; color: #6f3a08; line-height: 1.65; } .saike-lp-addon-note strong { color: #17345a; } .saike-lp-support-card { border-top: 4px solid var(--saike-orange); } .saike-lp-support-thumbs { display: grid; grid-template-columns: repeat(3, minmax(0, 1fr)); gap: 8px; margin-top: 16px; } .saike-lp-support-thumbs figure { margin: 0; overflow: hidden; border: 1px solid #edf2f7; border-radius: 6px; background: #fff; } .saike-lp-support-thumbs img { display: block; width: 100%; aspect-ratio: 1 / 1; object-fit: contain; padding: 8px; background: #fff; } .saike-lp-support-thumbs figcaption { min-height: 34px; padding: 7px 8px 8px; border-top: 1px solid #edf2f7; color: #1e3a5f; font-size: 12px; font-weight: 800; line-height: 1.35; } .saike-lp-support-card ul { display: grid; gap: 8px; margin: 14px 0 0; padding-left: 18px; color: #39475c; } .saike-lp-support-card li::marker { color: var(--saike-orange); } .saike-lp-application-grid { grid-template-columns: repeat(3, minmax(0, 1fr)); } .saike-lp-application-grid div { border: 1px solid var(--saike-line); border-radius: 8px; padding: 18px 20px; background: #fff; color: #20334d; font-weight: 800; } .saike-lp-split { display: grid; grid-template-columns: minmax(0, .95fr) minmax(0, 1.05fr); gap: 42px; align-items: center; } .saike-lp-video-box, .saike-lp-table-wrap { overflow: hidden; border: 1px solid var(--saike-line); border-radius: 8px; background: #fff; } .saike-lp-video-box video { display: block; width: 100%; background: #eef4fa; } .saike-lp-video-caption { padding: 16px 18px; color: var(--saike-muted); font-size: 14px; } .saike-lp-feature-list, .saike-lp-clean-list { display: grid; gap: 12px; margin: 0; padding: 0; list-style: none; } .saike-lp-feature-list li { border-left: 4px solid var(--saike-orange); padding: 10px 0 10px 14px; color: #26364d; font-weight: 700; } .saike-lp-clean-list li { position: relative; padding-left: 18px; color: #39475c; } .saike-lp-clean-list li::before { content: ''; position: absolute; left: 0; top: .72em; width: 6px; height: 6px; border-radius: 50%; background: var(--saike-orange); } .saike-lp-gallery { display: grid; grid-template-columns: 1.1fr .9fr; gap: 18px; height: min(58vw, 660px); overflow: hidden; } .saike-lp-gallery img { display: block; width: 100%; height: 100%; min-height: 260px; border: 1px solid var(--saike-line); border-radius: 8px; object-fit: cover; background: #fff; } .saike-lp-gallery-stack { display: grid; grid-template-rows: repeat(2, minmax(0, 1fr)); gap: 18px; } .saike-lp-gallery > img, .saike-lp-gallery-stack, .saike-lp-gallery-stack img { min-height: 0; } .saike-lp-kit-grid { grid-template-columns: repeat(3, minmax(0, 1fr)); } .saike-lp-kit .tag { display: inline-flex; margin-bottom: 12px; border-radius: 999px; padding: 5px 10px; background: #eef4fa; color: var(--saike-navy); font-size: 12px; font-weight: 800; } .saike-lp-table-wrap table, .saike-lp-spec-table { width: 100%; border-collapse: separate; border-spacing: 0; font-size: 15px; } .saike-lp-table-wrap th, .saike-lp-table-wrap td, .saike-lp-spec-table th, .saike-lp-spec-table td { border-bottom: 1px solid #e8eef4; padding: 13px 16px; text-align: left; vertical-align: top; } .saike-lp-table-wrap th, .saike-lp-spec-table th { width: 30%; color: var(--saike-navy); background: #f5f8fb; } .saike-lp-table-wrap tr:nth-child(even):not(.saike-lp-spec-heading) td { background: #fbfdff; } .saike-lp-spec-heading th { background: var(--saike-navy) !important; color: #fff !important; font-size: 16px; } .saike-lp-quote { background: var(--saike-deep); color: #fff; padding: 64px 0; } .saike-lp-quote-inner { display: flex; gap: 28px; align-items: center; justify-content: space-between; } .saike-lp-quote h2 { margin: 0; color: #fff; font-size: 34px; line-height: 1.16; } .saike-lp-quote p { margin: 12px 0 0; color: rgba(255,255,255,.82); } @media (max-width: 900px) { .saike-lp-wrap, .saike-lp-hero-inner { width: min(100% - 28px, 1180px); } .saike-lp-hero-inner, .saike-lp-split, .saike-lp-gallery, .saike-lp-quote-inner { display: grid; grid-template-columns: 1fr; } .saike-lp-gallery { height: auto; } .saike-lp-hero-inner { padding: 24px 0; } .saike-lp-points, .saike-lp-grid-3, .saike-lp-support-grid, .saike-lp-kit-grid { grid-template-columns: 1fr; } .saike-lp-detail-grid, .saike-lp-function-grid, .saike-lp-application-grid { grid-template-columns: 1fr; } .saike-lp-section { padding: 46px 0; } }

SAIKE 952D 2 in 1 rework station

Hot air and soldering in one repair station

SAIKE 952D is a focused 2 in 1 repair workstation for electronics repair shops, PCB rework, phone repair, SMD rework and training benches.

700W hot air rework
60W soldering station
2 in 1 repair station
Request Quote View Products
SAIKE 952D 2 in 1 hot air soldering station

Product image for model confirmation and buyer reference.

Buyer fit

One compact workstation for common repair bench work

Use 952D when the buyer needs hot air rework and soldering in one practical bench unit.

Repair shops

Suitable for phone repair, PCB repair, SMD rework and daily electronics service work.

Distributors

A clear 2 in 1 model for catalog listings, sample orders and bulk quotation inquiries.

Training benches

Combines hot air and soldering operation for repair education and practical bench training.

Product video

See the 952D powered on for repair bench use

The video helps buyers check the real product appearance, front panel layout, handle setup and workbench scale before inquiry.

  • Shows the real 952D machine and operating panel.
  • Helps confirm hot air, soldering and optional bracket layout.
  • Useful for repair shop, distributor and sample-order discussions.
Real 952D product video for checking appearance, panel layout and bench setup.

Product details

Front panel, side structure and bench setup

Use these images to confirm product structure, handle placement and the practical package direction before quoting.

SAIKE 952D front panel and display controls
SAIKE 952D side structure and rear connection area SAIKE 952D workbench setup with hot air and soldering handles

Core functions

Two repair functions with independent control

Hot air rework

700W hot air gun with skeleton type ceramic heating core, brushless fan, adjustable airflow, soft wind and low noise.

Soldering station

60W soldering section with LED digital display, 131A ceramic heating core, rapid warming, fast temperature compensation and anti-static design.

Optional bracket version

The equipped-bracket option keeps the hot air gun in a fixed position for longer rework tasks and component removal work.

Operating details

Control, safety and component operation details

Review the control logic, protection design and practical operating details for hot air rework, soldering and optional bracket use.

System control and safety

  • Hot air and soldering iron have independent switches and can be used separately or simultaneously.
  • Each section uses independent microcontroller control, so one section does not affect the normal work of the others.
  • High integrated circuit design helps reduce product failure rate.
  • PID program control tracks actual hot air and soldering iron temperature in milliseconds.
  • Self-detection includes over-temperature, short circuit, open circuit and overload display/protection.
  • Rear fuse holder and grounded exposed metal parts improve electrical safety.

Hot air gun operation

  • Skeleton type ceramic heating core improves reliability, stability and working life.
  • Handle induction device lets the hot air gun quickly enter working state when picked up from the holder.
  • When the handle is returned to the holder, heating stops, cold air is blown for cooling, and the unit enters standby state.
  • Brushless fan air source provides large adjustable airflow, gentle wind power and minimal noise.

Soldering iron operation

  • 131A ceramic heating core supports stable heating, rapid warming, reduced loss and long service life.
  • Anti-static design helps prevent electrostatic damage to delicate SMD components.
  • Suitable for small solder joints, pads, thinner welding materials and daily soldering work.
  • For thick or large solder joints, use a larger contact-area tip or hot air support.

Optional hot air bracket

  • The equipped-bracket version reduces the burden on arms and hands during longer hot air work.
  • It keeps the hot air gun in a stable position so the operator can focus on circuit boards and solder joints.
  • The bracket gives more working space for moving and adjusting circuit boards during component removal.
  • For frequent hot air use, manual mode can reduce repeated heating time and improve work efficiency.

Component function guide

How each section is normally used on the repair bench

Hot air gun

Generates hot airflow to heat solder into a molten state for soldering, desoldering, heat shrinkage, component removal and preheating work.

Suitable for SOIC, CHIP, QFP, PLCC, BGA, SMD and mobile phone wiring/base repair. It can also be used for drying, paint removal, adhesion removal, thawing and glue welding.

Soldering iron

Transfers heat through the soldering tip to melt solder for soldering and desoldering electronic components.

Best for small solder joints, pads and thinner welding materials. For larger joints, match a larger tip or use hot air support.

Hot air bracket option

The bracket version supports fixed-position hot air work and helps reduce hand fatigue during longer rework tasks.

It is useful for workshops that frequently remove components or need more stable heating angles.

Configuration options

Quote the product alone or build it into a repair kit

Before quotation, confirm voltage version, plug type, order quantity, destination country and package requirement.

Standard

Standard package

Host machine, hot air gun rack, soldering iron handle, soldering iron holder, nozzles and user manual.

Bracket

Equipped-bracket option

Offer the bracket version when the buyer needs fixed hot air positioning for longer component removal work.

Repair shop

Repair bench kit

Add suitable soldering tips, nozzles, solder wire, solder wick or cleaning accessories according to the buyer’s repair work.

Distributor

Bulk order quote

Confirm voltage version, plug type, bracket option, carton quantity, packaging requirement and destination country before quotation.

Typical applications

Where buyers can use this model

Electronic product assembly
Product development and research departments
Electronic product maintenance
Electrical soldering operation
Skill training in electronic institutions
Phone repair and PCB rework benches

Standard configuration

Physical items included in the package

Package items are listed separately from operation details so buyers can confirm what is included.

  • Host machine with hot air gun handle: 1 pcs
  • Hot air gun rack: 1 pcs
  • Soldering iron handle with tip and heater: 1 pcs
  • Soldering iron holder with cleaning sponge: 1 pcs
  • Nozzles: 4 pcs (5mm, 8mm, 10mm, 12*12mm)
  • User manual: 1 pcs

Technical specifications

Key parameters for buyer confirmation

Model952D
Input voltage220V-240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption750W
Weight3.42kg / 3.63kg with bracket
Inner box size210*300*215mm
Packing quantity6 pieces / box
Outer packing size438*320*665mm
Hot air gun
Working voltage220V-240V/AC, 50Hz (110V/AC, 60Hz)
Power dissipation700W
Display formLED digital, resolution 1C
Heating elementSkeleton type ceramic heating core
Temperature range100C-480C
Temperature stability+/-1C
Air flow typeBrushless fan soft wind
Gas flow120 L/min max
NoiseLess than 45dB
Handle lengthAbout 100cm including handle line
Soldering iron
Working voltage24V/AC
Rated power22W
Power consumption60W
Maximum power120W
Display formLED digital, resolution 1C
Heating element131A ceramic heating core
Temperature range200C-480C
Temperature stability+/-2C no load
Handle lengthAbout 100cm including handle line

Optional add-on support

Accessories, consumables and spare parts support

For repair shops and distributors, list the machine together with compatible spare parts, working accessories and daily consumables so buyers know how to maintain and restock the model after purchase.

Available add-on support. Tell us your repair work, quantity and restocking needs, and we can help match suitable spare parts, accessories or consumables with the machine.

Replacement parts

Useful for after-sales service and long-term repair bench operation.

  • Hot air handle
  • Soldering iron handle
  • Hot air heating core
  • 131A soldering iron heating core
SAIKE 952D hot air handle replacement
Hot air handle
SAIKE 952D soldering iron handle replacement
Soldering handle
SAIKE 952D soldering iron heating core replacement
Solder heater

Working accessories

Confirm nozzle, tip and holder compatibility by model before bulk order.

  • Hot air nozzles
  • Soldering tips
  • Optional hot air bracket
  • Soldering iron holder and bench support items
SAIKE 952D hot air nozzle option
10mm nozzle
SAIKE 952D soldering tip option
900M-T tips

Recommended consumables

Offer these as optional add-on items for repair bench restocking and starter kits.

  • Solder wire
  • Solder wick
  • Cleaning sponge / brass wire
  • Soldering tip refresher or repair box
SAIKE solder wire option
Solder wire
SAIKE solder wick option
Solder wick
SAIKE cleaning sponge option
Cleaning sponge

Need 952D for repair shop, distributor or bulk order?

Send your required voltage, plug type, quantity and destination country. We can help confirm package options and quotation details.

Request Quote
]]> https://en.saikecn.com/product/952d/feed 0 SAIKE 852D++ Hot air soldering station https://en.saikecn.com/product/852d-plus-plus https://en.saikecn.com/product/852d-plus-plus#respond Thu, 09 Nov 2023 03:26:33 +0000 https://en.saikecn.com/?post_type=product&p=808 700W hot air rework station and 40W soldering station for repair benches that need a compact 2 in 1 tool. Suitable for common PCB rework, SMD repair and electronics maintenance work.

  • 2 in 1 hot air and soldering station for bench repair
  • Digital display and brushless fan soft air design
  • For phone repair, PCB repair, SMD rework and training use
Need this model for repair shop, distributor or bulk order?
Send us the required voltage, plug type, quantity and package requirement. We can help confirm standard package, accessory kit and quotation details.
Request Quote
Technical Support
]]> /* SAIKE 852D++ landing page CSS */ :root { --saike-navy: #1E3A5F; --saike-deep: #102942; --saike-orange: #FF7A00; --saike-ink: #172133; --saike-muted: #637083; --saike-bg: #F5F7FA; --saike-line: #D8E2EC; --saike-white: #FFFFFF; } .single-product.postid-808 .saike-product-detail { display: none !important; } .saike-landing-852dpp { width: 100%; background: #fff; color: var(--saike-ink); font-family: Arial, Helvetica, sans-serif; line-height: 1.6; letter-spacing: 0; } .saike-landing-852dpp * { box-sizing: border-box; } .saike-landing-852dpp a { color: inherit; text-decoration: none; } .saike-lp-wrap { width: min(1180px, calc(100% - 40px)); margin: 0 auto; } .saike-lp-hero { background: radial-gradient(circle at 78% 22%, rgba(47,111,237,.35), transparent 34%), linear-gradient(135deg, #10243d 0%, #1E3A5F 52%, #143f68 100%); color: #fff; } .saike-lp-hero-inner { display: grid; grid-template-columns: minmax(0, 1fr) minmax(340px, 470px); gap: 52px; align-items: center; padding: 64px 0; } .saike-lp-eyebrow { margin: 0 0 14px; color: var(--saike-orange); font-size: 13px; font-weight: 800; letter-spacing: .08em; text-transform: uppercase; } .saike-lp-hero h1, .saike-lp-section h2, .saike-lp-quote h2 { letter-spacing: 0; } .saike-lp-hero h1 { max-width: 720px; margin: 0; color: #fff; font-size: clamp(40px, 4.5vw, 60px); line-height: 1.06; } .saike-lp-lead { max-width: 690px; margin: 22px 0 0; color: rgba(255,255,255,.84); font-size: 19px; } .saike-lp-points { display: grid; grid-template-columns: repeat(3, minmax(0, 1fr)); gap: 12px; margin: 30px 0; max-width: 700px; } .saike-lp-point { border: 1px solid rgba(255,255,255,.22); border-radius: 7px; padding: 14px 16px; background: rgba(255,255,255,.08); font-size: 14px; font-weight: 800; } .saike-lp-actions { display: flex; flex-wrap: wrap; gap: 12px; } .saike-lp-btn { display: inline-flex; align-items: center; justify-content: center; min-height: 48px; border-radius: 7px; padding: 0 22px; font-weight: 800; text-decoration: none !important; } .saike-lp-btn.primary { background: var(--saike-orange); color: #fff !important; } .saike-lp-btn.secondary { border: 1px solid #cbd8e5; background: #fff; color: #17345a !important; } .saike-lp-hero-media img { display: block; width: 100%; border-radius: 8px; background: #fff; box-shadow: 0 24px 80px rgba(0,0,0,.25); } .saike-lp-media-note { margin: 12px 0 0; color: rgba(255,255,255,.78); font-size: 13px; } .saike-lp-section { padding: 70px 0; } .saike-lp-section.light { background: var(--saike-bg); } .saike-lp-head { max-width: 840px; margin-bottom: 32px; } .saike-lp-head h2, .saike-lp-section h2 { margin: 0; color: var(--saike-ink); font-size: clamp(30px, 3vw, 42px); line-height: 1.14; } .saike-lp-head p, .saike-lp-section p { color: var(--saike-muted); } .saike-lp-grid-3, .saike-lp-kit-grid, .saike-lp-spec-grid, .saike-lp-detail-grid, .saike-lp-function-grid, .saike-lp-support-grid, .saike-lp-application-grid { display: grid; gap: 18px; } .saike-lp-grid-3 { grid-template-columns: repeat(3, minmax(0, 1fr)); } .saike-lp-card, .saike-lp-kit, .saike-lp-note-card, .saike-lp-detail-card, .saike-lp-function-card, .saike-lp-support-card { border: 1px solid var(--saike-line); border-radius: 8px; background: #fff; padding: 24px; } .saike-lp-card h3, .saike-lp-kit h3, .saike-lp-note-card h3, .saike-lp-detail-card h3, .saike-lp-function-card h3, .saike-lp-support-card h3 { margin: 0 0 10px; color: var(--saike-navy); font-size: 21px; line-height: 1.3; } .saike-lp-card p, .saike-lp-kit p, .saike-lp-note-card p, .saike-lp-detail-card p, .saike-lp-function-card p, .saike-lp-support-card p { margin: 0; } .saike-lp-detail-grid { grid-template-columns: repeat(2, minmax(0, 1fr)); align-items: stretch; } .saike-lp-detail-card { border-left: 5px solid var(--saike-orange); } .saike-lp-detail-card ul { display: grid; gap: 10px; margin: 14px 0 0; padding-left: 18px; color: #39475c; } .saike-lp-detail-card li::marker { color: var(--saike-orange); } .saike-lp-function-grid { grid-template-columns: repeat(3, minmax(0, 1fr)); } .saike-lp-function-card { background: #fbfdff; } .saike-lp-function-card p + p { margin-top: 12px; } .saike-lp-support-grid { grid-template-columns: repeat(3, minmax(0, 1fr)); } .saike-lp-addon-section { border-top: 1px solid #dce6f1; border-bottom: 1px solid #dce6f1; background: linear-gradient(180deg, #f7f9fc 0%, #eef3f8 100%); } .saike-lp-addon-note { margin: -10px 0 24px; border-left: 4px solid var(--saike-orange); border-radius: 6px; background: #fff8ef; padding: 14px 16px; color: #6f3a08; line-height: 1.65; } .saike-lp-addon-note strong { color: #17345a; } .saike-lp-support-card { border-top: 4px solid var(--saike-orange); } .saike-lp-support-thumbs { display: grid; grid-template-columns: repeat(3, minmax(0, 1fr)); gap: 8px; margin-top: 16px; } .saike-lp-support-thumbs figure { margin: 0; overflow: hidden; border: 1px solid #edf2f7; border-radius: 6px; background: #fff; } .saike-lp-support-thumbs img { display: block; width: 100%; aspect-ratio: 1 / 1; object-fit: contain; padding: 8px; background: #fff; } .saike-lp-support-thumbs figcaption { min-height: 34px; padding: 7px 8px 8px; border-top: 1px solid #edf2f7; color: #1e3a5f; font-size: 12px; font-weight: 800; line-height: 1.35; } .saike-lp-support-card ul { display: grid; gap: 8px; margin: 14px 0 0; padding-left: 18px; color: #39475c; } .saike-lp-support-card li::marker { color: var(--saike-orange); } .saike-lp-application-grid { grid-template-columns: repeat(3, minmax(0, 1fr)); } .saike-lp-application-grid div { border: 1px solid var(--saike-line); border-radius: 8px; padding: 18px 20px; background: #fff; color: #20334d; font-weight: 800; } .saike-lp-split { display: grid; grid-template-columns: minmax(0, .95fr) minmax(0, 1.05fr); gap: 42px; align-items: center; } .saike-lp-video-box, .saike-lp-table-wrap { overflow: hidden; border: 1px solid var(--saike-line); border-radius: 8px; background: #fff; } .saike-lp-video-box video { display: block; width: 100%; background: #eef4fa; } .saike-lp-video-caption { padding: 16px 18px; color: var(--saike-muted); font-size: 14px; } .saike-lp-feature-list, .saike-lp-clean-list { display: grid; gap: 12px; margin: 0; padding: 0; list-style: none; } .saike-lp-feature-list li { border-left: 4px solid var(--saike-orange); padding: 10px 0 10px 14px; color: #26364d; font-weight: 700; } .saike-lp-clean-list li { position: relative; padding-left: 18px; color: #39475c; } .saike-lp-clean-list li::before { content: ''; position: absolute; left: 0; top: .72em; width: 6px; height: 6px; border-radius: 50%; background: var(--saike-orange); } .saike-lp-gallery { display: grid; grid-template-columns: 1.1fr .9fr; gap: 18px; height: min(58vw, 660px); overflow: hidden; } .saike-lp-gallery img { display: block; width: 100%; height: 100%; min-height: 260px; border: 1px solid var(--saike-line); border-radius: 8px; object-fit: cover; background: #fff; } .saike-lp-gallery-stack { display: grid; grid-template-rows: repeat(2, minmax(0, 1fr)); gap: 18px; } .saike-lp-gallery > img, .saike-lp-gallery-stack, .saike-lp-gallery-stack img { min-height: 0; } .saike-lp-kit-grid { grid-template-columns: repeat(3, minmax(0, 1fr)); } .saike-lp-kit .tag { display: inline-flex; margin-bottom: 12px; border-radius: 999px; padding: 5px 10px; background: #eef4fa; color: var(--saike-navy); font-size: 12px; font-weight: 800; } .saike-lp-table-wrap table, .saike-lp-spec-table { width: 100%; border-collapse: separate; border-spacing: 0; font-size: 15px; } .saike-lp-table-wrap th, .saike-lp-table-wrap td, .saike-lp-spec-table th, .saike-lp-spec-table td { border-bottom: 1px solid #e8eef4; padding: 13px 16px; text-align: left; vertical-align: top; } .saike-lp-table-wrap th, .saike-lp-spec-table th { width: 30%; color: var(--saike-navy); background: #f5f8fb; } .saike-lp-table-wrap tr:nth-child(even):not(.saike-lp-spec-heading) td { background: #fbfdff; } .saike-lp-spec-heading th { background: var(--saike-navy) !important; color: #fff !important; font-size: 16px; } .saike-lp-quote { background: var(--saike-deep); color: #fff; padding: 64px 0; } .saike-lp-quote-inner { display: flex; gap: 28px; align-items: center; justify-content: space-between; } .saike-lp-quote h2 { margin: 0; color: #fff; font-size: 34px; line-height: 1.16; } .saike-lp-quote p { margin: 12px 0 0; color: rgba(255,255,255,.82); } @media (max-width: 900px) { .saike-lp-wrap, .saike-lp-hero-inner { width: min(100% - 28px, 1180px); } .saike-lp-hero-inner, .saike-lp-split, .saike-lp-gallery, .saike-lp-quote-inner { display: grid; grid-template-columns: 1fr; } .saike-lp-gallery { height: auto; } .saike-lp-hero-inner { padding: 24px 0; } .saike-lp-points, .saike-lp-grid-3, .saike-lp-support-grid, .saike-lp-kit-grid { grid-template-columns: 1fr; } .saike-lp-detail-grid, .saike-lp-function-grid, .saike-lp-application-grid { grid-template-columns: 1fr; } .saike-lp-section { padding: 46px 0; } }

SAIKE 852D++ 2 in 1 rework station

Hot air and soldering in one repair station

SAIKE 852D++ is an 852D series 2 in 1 repair workstation for electronics repair shops, PCB rework, phone repair, SMD rework and training benches.

700W hot air rework
40W soldering station
2 in 1 repair station
Request Quote View Products
SAIKE 852D++ 2 in 1 hot air soldering station

Product image for model confirmation and buyer reference.

Buyer fit

One compact workstation for common repair bench work

Use 852D++ when the buyer needs hot air rework and soldering in one practical bench unit.

Repair shops

Suitable for phone repair, PCB repair, SMD rework and daily electronics service work.

Distributors

A clear 2 in 1 model for catalog listings, sample orders and bulk quotation inquiries.

Training benches

Combines hot air and soldering operation for repair education and practical bench training.

Product video

See the 852D++ powered on for repair bench use

The video helps buyers check the real product appearance, front panel layout, handle setup and workbench scale before inquiry.

  • Shows the real 852D++ machine and operating panel.
  • Helps confirm hot air, soldering and optional bracket layout.
  • Useful for repair shop, distributor and sample-order discussions.
Real 852D++ product video for checking appearance, panel layout and bench setup.

Product details

Front panel, side structure and bench setup

Use these images to confirm product structure, handle placement and the practical package direction before quoting.

SAIKE 852D++ front panel and display controls
SAIKE 852D++ side structure and rear connection area SAIKE 852D++ workbench setup with hot air and soldering handles

Core functions

Two repair functions with independent control

Hot air rework

700W hot air gun with skeleton type ceramic heating core, brushless fan, adjustable airflow, soft wind and low noise.

Soldering station

40W soldering section with LED digital display, 132A ceramic heating core, rapid warming, fast temperature compensation and anti-static design.

Optional bracket version

The equipped-bracket option keeps the hot air gun in a fixed position for longer rework tasks and component removal work.

Operating details

Control, safety and component operation details

Review the control logic, protection design and practical operating details for hot air rework, soldering and optional bracket use.

System control and safety

  • Hot air and soldering iron have independent switches and can be used separately or simultaneously.
  • Each section uses independent microcontroller control, so one section does not affect the normal work of the others.
  • High integrated circuit design helps reduce product failure rate.
  • PID program control tracks actual hot air and soldering iron temperature in milliseconds.
  • Self-detection includes over-temperature, short circuit, open circuit and overload display/protection.
  • Rear fuse holder and grounded exposed metal parts improve electrical safety.

Hot air gun operation

  • Skeleton type ceramic heating core improves reliability, stability and working life.
  • Handle induction device lets the hot air gun quickly enter working state when picked up from the holder.
  • When the handle is returned to the holder, heating stops, cold air is blown for cooling, and the unit enters standby state.
  • Brushless fan air source provides large adjustable airflow, gentle wind power and minimal noise.

Soldering iron operation

  • 132A ceramic heating core supports stable heating, rapid warming, reduced loss and long service life.
  • Anti-static design helps prevent electrostatic damage to delicate SMD components.
  • Suitable for small solder joints, pads, thinner welding materials and daily soldering work.
  • For thick or large solder joints, use a larger contact-area tip or hot air support.

Optional hot air bracket

  • The equipped-bracket version reduces the burden on arms and hands during longer hot air work.
  • It keeps the hot air gun in a stable position so the operator can focus on circuit boards and solder joints.
  • The bracket gives more working space for moving and adjusting circuit boards during component removal.
  • For frequent hot air use, manual mode can reduce repeated heating time and improve work efficiency.

Component function guide

How each section is normally used on the repair bench

Hot air gun

Generates hot airflow to heat solder into a molten state for soldering, desoldering, heat shrinkage, component removal and preheating work.

Suitable for SOIC, CHIP, QFP, PLCC, BGA, SMD and mobile phone wiring/base repair. It can also be used for drying, paint removal, adhesion removal, thawing and glue welding.

Soldering iron

Transfers heat through the soldering tip to melt solder for soldering and desoldering electronic components.

Best for small solder joints, pads and thinner welding materials. For larger joints, match a larger tip or use hot air support.

Hot air bracket option

The bracket version supports fixed-position hot air work and helps reduce hand fatigue during longer rework tasks.

It is useful for workshops that frequently remove components or need more stable heating angles.

Configuration options

Quote the product alone or build it into a repair kit

Before quotation, confirm voltage version, plug type, order quantity, destination country and package requirement.

Standard

Standard package

Host machine, hot air gun rack, soldering iron handle, soldering iron holder, nozzles and user manual.

Bracket

Equipped-bracket option

Offer the bracket version when the buyer needs fixed hot air positioning for longer component removal work.

Repair shop

Repair bench kit

Add suitable soldering tips, nozzles, solder wire, solder wick or cleaning accessories according to the buyer’s repair work.

Distributor

Bulk order quote

Confirm voltage version, plug type, bracket option, carton quantity, packaging requirement and destination country before quotation.

Typical applications

Where buyers can use this model

Electronic product assembly
Product development and research departments
Electronic product maintenance
Electrical soldering operation
Skill training in electronic institutions
Phone repair and PCB rework benches

Standard configuration

Physical items included in the package

Package items are listed separately from operation details so buyers can confirm what is included.

  • Host machine with hot air gun handle: 1 pcs
  • Hot air gun rack: 1 pcs
  • Soldering iron handle with tip and heater: 1 pcs
  • Soldering iron holder with cleaning sponge: 1 pcs
  • Nozzles: 4 pcs (5mm, 8mm, 10mm, 12*12mm)
  • User manual: 1 pcs

Technical specifications

Key parameters for buyer confirmation

Model852D++
Input voltage220V-240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption740W
Weight2.92kg / 3.17kg with bracket
Inner box size210*300*215mm
Packing quantity6 pieces / box
Outer packing size438*320*665mm
Hot air gun
Working voltage220V-240V/AC, 50Hz (110V/AC, 60Hz)
Power dissipation700W
Display formLED digital, resolution 1C
Heating elementSkeleton type ceramic heating core
Temperature range100C-500C
Temperature stability+/-1C
Air flow typeBrushless fan soft wind
Gas flow120 L/min max
NoiseLess than 45dB
Handle lengthAbout 100cm including handle line
Soldering iron
Working voltage24V/AC
Power consumption40W
Display formLED digital, resolution 1C
Heating element132A ceramic heating core
Temperature range200C-500C
Temperature stability+/-2C no load
Handle lengthAbout 100cm including handle line

Optional add-on support

Accessories, consumables and spare parts support

For repair shops and distributors, list the machine together with compatible spare parts, working accessories and daily consumables so buyers know how to maintain and restock the model after purchase.

Available add-on support. Tell us your repair work, quantity and restocking needs, and we can help match suitable spare parts, accessories or consumables with the machine.

Replacement parts

Useful for after-sales service and long-term repair bench operation.

  • Hot air handle
  • Soldering iron handle
  • Hot air heating core
  • 132A soldering iron heating core
SAIKE 852D++ hot air handle replacement
Hot air handle
SAIKE 852D++ soldering iron handle replacement
Soldering handle
SAIKE 852D++ soldering iron heating core replacement
Solder heater

Working accessories

Confirm nozzle, tip and holder compatibility by model before bulk order.

  • Hot air nozzles
  • Soldering tips
  • Optional hot air bracket
  • Soldering iron holder and bench support items
SAIKE 852D++ hot air nozzle option
10mm nozzle
SAIKE 852D++ soldering tip option
900M-T tips

Recommended consumables

Offer these as optional add-on items for repair bench restocking and starter kits.

  • Solder wire
  • Solder wick
  • Cleaning sponge / brass wire
  • Soldering tip refresher or repair box
SAIKE solder wire option
Solder wire
SAIKE solder wick option
Solder wick
SAIKE cleaning sponge option
Cleaning sponge

Need 852D++ for repair shop, distributor or bulk order?

Send your required voltage, plug type, quantity and destination country. We can help confirm package options and quotation details.

Request Quote
]]> https://en.saikecn.com/product/852d-plus-plus/feed 0 SAIKE 878D Hot air soldering station https://en.saikecn.com/product/878d https://en.saikecn.com/product/878d#respond Thu, 09 Nov 2023 03:25:12 +0000 https://en.saikecn.com/?post_type=product&p=807 Need this model for repair shop, distributor or bulk order?
Send us the required voltage, plug type, quantity and package requirement. We can help confirm standard package, accessory kit and quotation details.
Request Quote
Technical Support ]]> /* SAIKE 878D landing page CSS */ :root { --saike-navy: #1E3A5F; --saike-deep: #102942; --saike-orange: #FF7A00; --saike-ink: #172133; --saike-muted: #637083; --saike-bg: #F5F7FA; --saike-line: #D8E2EC; --saike-white: #FFFFFF; } .single-product.postid-807 .saike-product-detail { display: none !important; } .saike-landing-878d { width: 100%; background: #fff; color: var(--saike-ink); font-family: Arial, Helvetica, sans-serif; line-height: 1.6; letter-spacing: 0; } .saike-landing-878d * { box-sizing: border-box; } .saike-landing-878d a { color: inherit; text-decoration: none; } .saike-lp-wrap { width: min(1180px, calc(100% - 40px)); margin: 0 auto; } .saike-lp-hero { background: radial-gradient(circle at 78% 22%, rgba(47,111,237,.35), transparent 34%), linear-gradient(135deg, #10243d 0%, #1E3A5F 52%, #143f68 100%); color: #fff; } .saike-lp-hero-inner { display: grid; grid-template-columns: minmax(0, 1fr) minmax(340px, 470px); gap: 52px; align-items: center; padding: 64px 0; } .saike-lp-eyebrow { margin: 0 0 14px; color: var(--saike-orange); font-size: 13px; font-weight: 800; letter-spacing: .08em; text-transform: uppercase; } .saike-lp-hero h1, .saike-lp-section h2, .saike-lp-quote h2 { letter-spacing: 0; } .saike-lp-hero h1 { max-width: 720px; margin: 0; color: #fff; font-size: clamp(40px, 4.5vw, 60px); line-height: 1.06; } .saike-lp-lead { max-width: 690px; margin: 22px 0 0; color: rgba(255,255,255,.84); font-size: 19px; } .saike-lp-points { display: grid; grid-template-columns: repeat(3, minmax(0, 1fr)); gap: 12px; margin: 30px 0; max-width: 700px; } .saike-lp-point { border: 1px solid rgba(255,255,255,.22); border-radius: 7px; padding: 14px 16px; background: rgba(255,255,255,.08); font-size: 14px; font-weight: 800; } .saike-lp-actions { display: flex; flex-wrap: wrap; gap: 12px; } .saike-lp-btn { display: inline-flex; align-items: center; justify-content: center; min-height: 48px; border-radius: 7px; padding: 0 22px; font-weight: 800; text-decoration: none !important; } .saike-lp-btn.primary { background: var(--saike-orange); color: #fff !important; } .saike-lp-btn.secondary { border: 1px solid #cbd8e5; background: #fff; color: #17345a !important; } .saike-lp-hero-media img { display: block; width: 100%; border-radius: 8px; background: #fff; box-shadow: 0 24px 80px rgba(0,0,0,.25); } .saike-lp-media-note { margin: 12px 0 0; color: rgba(255,255,255,.78); font-size: 13px; } .saike-lp-section { padding: 70px 0; } .saike-lp-section.light { background: var(--saike-bg); } .saike-lp-head { max-width: 840px; margin-bottom: 32px; } .saike-lp-head h2, .saike-lp-section h2 { margin: 0; color: var(--saike-ink); font-size: clamp(30px, 3vw, 42px); line-height: 1.14; } .saike-lp-head p, .saike-lp-section p { color: var(--saike-muted); } .saike-lp-grid-3, .saike-lp-kit-grid, .saike-lp-spec-grid, .saike-lp-detail-grid, .saike-lp-function-grid, .saike-lp-support-grid, .saike-lp-application-grid { display: grid; gap: 18px; } .saike-lp-grid-3 { grid-template-columns: repeat(3, minmax(0, 1fr)); } .saike-lp-card, .saike-lp-kit, .saike-lp-note-card, .saike-lp-detail-card, .saike-lp-function-card, .saike-lp-support-card { border: 1px solid var(--saike-line); border-radius: 8px; background: #fff; padding: 24px; } .saike-lp-card h3, .saike-lp-kit h3, .saike-lp-note-card h3, .saike-lp-detail-card h3, .saike-lp-function-card h3, .saike-lp-support-card h3 { margin: 0 0 10px; color: var(--saike-navy); font-size: 21px; line-height: 1.3; } .saike-lp-card p, .saike-lp-kit p, .saike-lp-note-card p, .saike-lp-detail-card p, .saike-lp-function-card p, .saike-lp-support-card p { margin: 0; } .saike-lp-detail-grid { grid-template-columns: repeat(2, minmax(0, 1fr)); align-items: stretch; } .saike-lp-detail-card { border-left: 5px solid var(--saike-orange); } .saike-lp-detail-card ul { display: grid; gap: 10px; margin: 14px 0 0; padding-left: 18px; color: #39475c; } .saike-lp-detail-card li::marker { color: var(--saike-orange); } .saike-lp-function-grid { grid-template-columns: repeat(3, minmax(0, 1fr)); } .saike-lp-function-card { background: #fbfdff; } .saike-lp-function-card p + p { margin-top: 12px; } .saike-lp-support-grid { grid-template-columns: repeat(3, minmax(0, 1fr)); } .saike-lp-addon-section { border-top: 1px solid #dce6f1; border-bottom: 1px solid #dce6f1; background: linear-gradient(180deg, #f7f9fc 0%, #eef3f8 100%); } .saike-lp-addon-note { margin: -10px 0 24px; border-left: 4px solid var(--saike-orange); border-radius: 6px; background: #fff8ef; padding: 14px 16px; color: #6f3a08; line-height: 1.65; } .saike-lp-addon-note strong { color: #17345a; } .saike-lp-support-card { border-top: 4px solid var(--saike-orange); } .saike-lp-support-thumbs { display: grid; grid-template-columns: repeat(3, minmax(0, 1fr)); gap: 8px; margin-top: 16px; } .saike-lp-support-thumbs figure { margin: 0; overflow: hidden; border: 1px solid #edf2f7; border-radius: 6px; background: #fff; } .saike-lp-support-thumbs img { display: block; width: 100%; aspect-ratio: 1 / 1; object-fit: contain; padding: 8px; background: #fff; } .saike-lp-support-thumbs figcaption { min-height: 34px; padding: 7px 8px 8px; border-top: 1px solid #edf2f7; color: #1e3a5f; font-size: 12px; font-weight: 800; line-height: 1.35; } .saike-lp-support-card ul { display: grid; gap: 8px; margin: 14px 0 0; padding-left: 18px; color: #39475c; } .saike-lp-support-card li::marker { color: var(--saike-orange); } .saike-lp-application-grid { grid-template-columns: repeat(3, minmax(0, 1fr)); } .saike-lp-application-grid div { border: 1px solid var(--saike-line); border-radius: 8px; padding: 18px 20px; background: #fff; color: #20334d; font-weight: 800; } .saike-lp-split { display: grid; grid-template-columns: minmax(0, .95fr) minmax(0, 1.05fr); gap: 42px; align-items: center; } .saike-lp-video-box, .saike-lp-table-wrap { overflow: hidden; border: 1px solid var(--saike-line); border-radius: 8px; background: #fff; } .saike-lp-video-box video { display: block; width: 100%; background: #eef4fa; } .saike-lp-video-caption { padding: 16px 18px; color: var(--saike-muted); font-size: 14px; } .saike-lp-feature-list, .saike-lp-clean-list { display: grid; gap: 12px; margin: 0; padding: 0; list-style: none; } .saike-lp-feature-list li { border-left: 4px solid var(--saike-orange); padding: 10px 0 10px 14px; color: #26364d; font-weight: 700; } .saike-lp-clean-list li { position: relative; padding-left: 18px; color: #39475c; } .saike-lp-clean-list li::before { content: ''; position: absolute; left: 0; top: .72em; width: 6px; height: 6px; border-radius: 50%; background: var(--saike-orange); } .saike-lp-gallery { display: grid; grid-template-columns: 1.1fr .9fr; gap: 18px; height: min(58vw, 660px); overflow: hidden; } .saike-lp-gallery img { display: block; width: 100%; height: 100%; min-height: 260px; border: 1px solid var(--saike-line); border-radius: 8px; object-fit: cover; background: #fff; } .saike-lp-gallery-stack { display: grid; grid-template-rows: repeat(2, minmax(0, 1fr)); gap: 18px; } .saike-lp-gallery > img, .saike-lp-gallery-stack, .saike-lp-gallery-stack img { min-height: 0; } .saike-lp-kit-grid { grid-template-columns: repeat(3, minmax(0, 1fr)); } .saike-lp-kit .tag { display: inline-flex; margin-bottom: 12px; border-radius: 999px; padding: 5px 10px; background: #eef4fa; color: var(--saike-navy); font-size: 12px; font-weight: 800; } .saike-lp-table-wrap table, .saike-lp-spec-table { width: 100%; border-collapse: separate; border-spacing: 0; font-size: 15px; } .saike-lp-table-wrap th, .saike-lp-table-wrap td, .saike-lp-spec-table th, .saike-lp-spec-table td { border-bottom: 1px solid #e8eef4; padding: 13px 16px; text-align: left; vertical-align: top; } .saike-lp-table-wrap th, .saike-lp-spec-table th { width: 30%; color: var(--saike-navy); background: #f5f8fb; } .saike-lp-table-wrap tr:nth-child(even):not(.saike-lp-spec-heading) td { background: #fbfdff; } .saike-lp-spec-heading th { background: var(--saike-navy) !important; color: #fff !important; font-size: 16px; } .saike-lp-quote { background: var(--saike-deep); color: #fff; padding: 64px 0; } .saike-lp-quote-inner { display: flex; gap: 28px; align-items: center; justify-content: space-between; } .saike-lp-quote h2 { margin: 0; color: #fff; font-size: 34px; line-height: 1.16; } .saike-lp-quote p { margin: 12px 0 0; color: rgba(255,255,255,.82); } @media (max-width: 900px) { .saike-lp-wrap, .saike-lp-hero-inner { width: min(100% - 28px, 1180px); } .saike-lp-hero-inner, .saike-lp-split, .saike-lp-gallery, .saike-lp-quote-inner { display: grid; grid-template-columns: 1fr; } .saike-lp-gallery { height: auto; } .saike-lp-hero-inner { padding: 24px 0; } .saike-lp-points, .saike-lp-grid-3, .saike-lp-support-grid, .saike-lp-kit-grid { grid-template-columns: 1fr; } .saike-lp-detail-grid, .saike-lp-function-grid, .saike-lp-application-grid { grid-template-columns: 1fr; } .saike-lp-section { padding: 46px 0; } }

SAIKE 878D 2 in 1 rework station

Hot air and soldering in one repair station

SAIKE 878D is a compact 2 in 1 repair workstation for electronics repair shops, PCB rework, phone repair, SMD rework and training benches.

700W hot air rework
40W soldering station
2 in 1 repair station
Request Quote View Products
SAIKE 878D 2 in 1 hot air soldering station

Product image for model confirmation and buyer reference.

Buyer fit

One compact workstation for common repair bench work

Use 878D when the buyer needs hot air rework and soldering in one practical bench unit.

Repair shops

Suitable for phone repair, PCB repair, SMD rework and daily electronics service work.

Distributors

A clear 2 in 1 model for catalog listings, sample orders and bulk quotation inquiries.

Training benches

Combines hot air and soldering operation for repair education and practical bench training.

Product video

See the 878D powered on for repair bench use

The video helps buyers check the real product appearance, front panel layout, handle setup and workbench scale before inquiry.

  • Shows the real 878D machine and operating panel.
  • Helps confirm hot air, soldering and compact body layout.
  • Useful for repair shop, distributor and sample-order discussions.
Real 878D product video for checking appearance, panel layout and bench setup.

Product details

Front panel, side structure and bench setup

Use these images to confirm product structure, handle placement and the practical package direction before quoting.

SAIKE 878D front panel and display controls
SAIKE 878D side structure and rear connection area SAIKE 878D workbench setup with hot air and soldering handles

Core functions

Two repair functions with independent control

Hot air rework

700W hot air gun with skeleton type ceramic heating core, brushless fan, adjustable airflow, soft wind and low noise.

Soldering station

40W soldering section with LED digital display, 878D ceramic heating core, rapid warming, fast temperature compensation and anti-static design.

Lightweight body design

Transformer-free design makes the body lighter and improves transport performance.

Operating details

Control, safety and component operation details

Review the control logic, protection design and practical operating details for hot air rework, soldering and lighter body use.

System control and safety

  • Hot air and soldering iron have independent switches and can be used separately or simultaneously.
  • Each section uses independent microcontroller control, so one section does not affect the normal work of the others.
  • High integrated circuit design helps reduce product failure rate.
  • PID program control tracks actual hot air and soldering iron temperature in milliseconds.
  • Self-detection includes over-temperature, short circuit, open circuit and overload display/protection.
  • Rear fuse holder and grounded exposed metal parts improve electrical safety.

Hot air gun operation

  • Skeleton type ceramic heating core improves reliability, stability and working life.
  • Handle induction device lets the hot air gun quickly enter working state when picked up from the holder.
  • When the handle is returned to the holder, heating stops, cold air is blown for cooling, and the unit enters standby state.
  • Brushless fan air source provides large adjustable airflow, gentle wind power and minimal noise.

Soldering iron operation

  • 878D ceramic heating core supports stable heating, rapid warming, reduced loss and long service life.
  • Anti-static design helps prevent electrostatic damage to delicate SMD components.
  • Suitable for small solder joints, pads, thinner welding materials and daily soldering work.
  • For thick or large solder joints, use a larger contact-area tip or hot air support.

Soldering iron hibernation

  • The soldering iron has a fixed 10-minute hibernation function when it is not in use.
  • The 878D ceramic heating core supports peak heating, rapid heating and fast temperature compensation.
  • This makes the soldering section suitable for larger solder joints, rough blocks and difficult solder joints.
  • Anti-static design helps protect delicate SMD components during daily repair work.

Component function guide

How each section is normally used on the repair bench

Hot air gun

Generates hot airflow to heat solder into a molten state for soldering, desoldering, heat shrinkage, component removal and preheating work.

Suitable for SOIC, CHIP, QFP, PLCC, BGA, SMD and mobile phone wiring/base repair. It can also be used for drying, paint removal, adhesion removal, thawing and glue welding.

Soldering iron

Transfers heat through the soldering tip to melt solder for soldering and desoldering electronic components.

Best for small solder joints, pads and thinner welding materials. For larger joints, match a larger tip or use hot air support.

Soldering iron hibernation

The soldering iron has a fixed 10-minute hibernation function when it is not in use.

This helps reduce unnecessary heating time and supports safer daily bench operation.

Configuration options

Quote the product alone or build it into a repair kit

Before quotation, confirm voltage version, plug type, order quantity, destination country and package requirement.

Standard

Standard package

Host machine, hot air gun rack, soldering iron handle, soldering iron holder, nozzles and user manual.

Compact

Compact repair station option

Use this model when the buyer wants a lighter 2 in 1 station for daily repair bench work.

Repair shop

Repair bench kit

Add suitable soldering tips, nozzles, solder wire, solder wick or cleaning accessories according to the buyer’s repair work.

Distributor

Bulk order quote

Confirm voltage version, plug type, carton quantity, packaging requirement and destination country before quotation.

Typical applications

Where buyers can use this model

Electronic product assembly
Product development and research departments
Electronic product maintenance
Electrical soldering operation
Skill training in electronic institutions
Phone repair and PCB rework benches

Standard configuration

Physical items included in the package

Package items are listed separately from operation details so buyers can confirm what is included.

  • Host machine with hot air gun handle: 1 pcs
  • Hot air gun rack: 1 pcs
  • Soldering iron handle with tip and heater: 1 pcs
  • Soldering iron holder with cleaning sponge: 1 pcs
  • Nozzles: 3 pcs (8mm, 10mm, 12*12mm)
  • User manual: 1 pcs

Technical specifications

Key parameters for buyer confirmation

Model878D
Input voltage220V-240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption780W
Weight1.81kg
Inner box size290*200*175mm
Packing quantity6 pieces / box
Outer packing size450*320*600mm
Hot air gun
Working voltage220V-240V/AC, 50Hz (110V/AC, 60Hz)
Power dissipation700W
Display formLED digital, resolution 1C
Heating elementSkeleton type ceramic heating core
Temperature range100C-480C
Temperature stability+/-1C
Air flow typeBrushless fan soft wind
Gas flow120 L/min max
NoiseLess than 45dB
Handle lengthAbout 100cm including handle line
Soldering iron
Working voltage220V-240V/AC, 50Hz (110V/AC, 60Hz)
Rated power22W
Power consumption40W
Maximum power120W
Display formLED digital, resolution 1C
Heating element878D ceramic heating core
Temperature range200C-480C
Temperature stability+/-2C no load
Handle lengthAbout 100cm including handle line

Optional add-on support

Accessories, consumables and spare parts support

For repair shops and distributors, list the machine together with compatible spare parts, working accessories and daily consumables so buyers know how to maintain and restock the model after purchase.

Available add-on support. Tell us your repair work, quantity and restocking needs, and we can help match suitable spare parts, accessories or consumables with the machine.

Replacement parts

Useful for after-sales service and long-term repair bench operation.

  • Hot air heating core
  • 878D soldering iron heating core
  • Handle and rack replacement can be confirmed by order requirement
  • Power switch and control parts for service support
SAIKE 878D hot air heating core replacement
Hot air heater
SAIKE 878D soldering iron heating core replacement
Solder heater

Working accessories

Confirm nozzle, tip and holder compatibility by model before bulk order.

  • Hot air nozzles for different component areas
  • Compatible soldering tips
  • Optional soldering tips for different contact areas
  • Soldering iron holder and cleaning sponge
SAIKE 878D 5mm hot air nozzle option
5mm nozzle
SAIKE 878D 10mm hot air nozzle option
10mm nozzle
SAIKE 878D soldering tip option
900M-T tips

Recommended consumables

Offer these as optional add-on items for repair bench restocking and starter kits.

  • Solder wire
  • Solder wick
  • Cleaning sponge / brass wire
  • Soldering tip refresher or repair box
SAIKE solder wire option
Solder wire
SAIKE solder wick option
Solder wick
SAIKE cleaning sponge option
Cleaning sponge

Need 878D for repair shop, distributor or bulk order?

Send your required voltage, plug type, quantity and destination country. We can help confirm package options and quotation details.

Request Quote
]]> https://en.saikecn.com/product/878d/feed 0 SAIKE 898D+ Hot air soldering station https://en.saikecn.com/product/898d-plus https://en.saikecn.com/product/898d-plus#respond Thu, 09 Nov 2023 03:24:15 +0000 https://en.saikecn.com/?post_type=product&p=806 Need this model for repair shop, distributor or bulk order?
Send us the required voltage, plug type, quantity and package requirement. We can help confirm standard package, accessory kit and quotation details.
Request Quote
Technical Support ]]>

Product Overview

SAIKE 898D+ Hot air soldering station is a SAIKE repair tool for professional electronics repair work. 700W Hot air rework station and 60W Soldering station in one, brushless fan airflow, hot air gun and soldering iron digital display.

Model Position

Use this model when the buyer needs a repair bench tool matched to its voltage, plug type, quantity and application requirements.

Key Features

  • PID temperature control tracks the working temperature quickly and supports fast temperature compensation.
  • The machine includes self-diagnosis and display/protection for over-temperature, short circuit, open circuit and overload faults.
  • A rear fuse holder and grounded metal parts help improve electrical safety.
  • The hot air gun heater uses the skeleton type ceramic heating core, and the the design supports stable operation and longer heater service life.
  • The handle of the hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the hot air gun can quickly enter the working state; Put the handle back on the handle frame, the hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
  • hot air gun uses a brushless fan as the air source, air volume is large, air volume is adjustable, gentle wind power and minimal noise.
  • Soldering iron uses 131A ceramic heating core, peak heating, rapid heating, and fast temperature compensation function. Therefore, it is very suitable for the desoldering of various solder joints, especially for the desoldering of large solder joints, rough blocks and miscellaneous difficult solder joints.
  • The soldering iron is designed with anti-static protection, to prevent electrostatic damage to sensitive SMD components.
  • Using Ferro-alloy Soldering iron seat, durable, avoid burns.

Component Function Notes

hot air gun

By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.

  • Suitable for various kinds of soldering or desoldering work of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
  • Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Soldering Iron

The soldering iron transfers heat through the tip to melt solder for soldering and desoldering work.

  • Suitable for relatively larger solder joints or pads to provide enough heat for better completion of welding operations.
  • For thicker and larger solder joints and pads, you can try replacing the soldering iron tip with a larger contact area or use a hot air gun for welding.

Technical Specifications

Model 898D+
Input voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 750W
Weight 2.96kg
Inner box size 260*166*155mm
Packing quantity 8 pieces / box
Outer packing size 560*355*315mm
hot air gun
Working voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 700W
Display form LED digital (Resolution 1℃)
Heating element Skeleton type ceramic heating core
Temperature range 100℃－480℃
Temperature stability ±1℃
Type of air flow brushless fan airflow
Gas flow 120 L/min(max)
Noise Less than 45dB
Handle length About 100cm (Including handle line)
Soldering iron
Working voltage 24V/AC
Rated power 22W
Power consumption 60W
Maximum power 120W
Display form LED digital (Resolution 1℃)
Temperature range 200℃－480℃
Heating element 131A ceramic heating core
Temperature stability ±2℃(no load)
Handle length About 100cm (Including handle line)

Standard Configuration

  • Host machine (include hot air gun handle): 1 pcs
  • hot air gun rack: 1 pcs
  • Soldering iron handle (include iron tip and heater): 1 pcs
  • Soldering iron holder (include Cleaning sponge): 1 pcs
  • Nozzles: 4 pcs (5mm, 8mm, 10mm, 12*12mm)
  • User manual: 1 pcs

Typical Applications

  • Electronic product assembly
  • Product development in scientific research departments
  • Electronic products maintenance
  • Electrical soldering operation
  • electronics training and repair education

Order and Configuration Notes

Please confirm rated voltage, power plug, order quantity and accessory requirements before production or shipment. For distributor orders, repair shop bundles or accessory kits, contact SAIKE with the target models and quantity so we can confirm a suitable configuration.

]]> https://en.saikecn.com/product/898d-plus/feed 0 SAIKE 898D Hot air soldering station https://en.saikecn.com/product/898d https://en.saikecn.com/product/898d#respond Thu, 09 Nov 2023 03:07:34 +0000 https://en.saikecn.com/?post_type=product&p=804 Need this model for repair shop, distributor or bulk order?
Send us the required voltage, plug type, quantity and package requirement. We can help confirm standard package, accessory kit and quotation details.
Request Quote
Technical Support ]]>

Product Overview

SAIKE 898D Hot air soldering station is a SAIKE repair tool for professional electronics repair work. 700W Hot air rework station and 40W Soldering station in one, brushless fan airflow, hot air gun and soldering iron digital display.

Model Position

Use this model when the buyer needs a repair bench tool matched to its voltage, plug type, quantity and application requirements.

Key Features

  • PID temperature control tracks the working temperature quickly and supports fast temperature compensation.
  • The machine includes self-diagnosis and display/protection for over-temperature, short circuit, open circuit and overload faults.
  • A rear fuse holder and grounded metal parts help improve electrical safety.
  • The hot air gun heater uses the skeleton type ceramic heating core, and the the design supports stable operation and longer heater service life.
  • The handle of the hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the hot air gun can quickly enter the working state; Put the handle back on the handle frame, the hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
  • hot air gun uses a brushless fan as the air source, air volume is large, air volume is adjustable, gentle wind power and minimal noise.
  • Soldering iron uses 132A ceramic heating core, stable heating, rapid warming, reduce loss, long service life.
  • The soldering iron is designed with anti-static protection, to prevent electrostatic damage to sensitive SMD components.

Component Function Notes

hot air gun

By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.

  • Suitable for various kinds of soldering or desoldering work of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
  • Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Soldering Iron

The soldering iron transfers heat through the tip to melt solder for soldering and desoldering work.

  • Suitable for small solder joints or pads, such as thinner, smaller welding materials, no surrounding metal and other heat-absorbing parts.
  • For relatively thick and large solder joints and pads, you can try replacing the soldering iron tip with a larger contact area or use a hot air gun for welding.

Technical Specifications

Model 898D
Input voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 740W
Weight 2.53kg
Inner box size 260*166*155mm
Packing quantity 8 pieces / box
Outer packing size 570*360*320mm
hot air gun
Working voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 700W
Display form LED digital (Resolution 1℃)
Heating element Skeleton type ceramic heating core
Temperature range 100℃－480℃
Temperature stability ±1℃
Type of air flow brushless fan airflow
Gas flow 120 L/min(max)
Noise Less than 45dB
Handle length About 100cm(Including handle line)
Soldering iron
Working voltage 24V/AC
Power consumption 40W
Display form LED digital (Resolution 1℃)
Temperature range 200℃－480℃
Heating element 132A ceramic heating core
Temperature stability ±2℃(no load)
Handle length About 100cm(Including handle line)

Standard Configuration

  • Host machine (include hot air gun handle): 1 pcs
  • hot air gun rack: 1 pcs
  • Soldering iron handle (include iron tip and heater): 1 pcs
  • Soldering iron holder (include Cleaning sponge): 1 pcs
  • Nozzles: 4 pcs (5mm, 8mm, 10mm, 12*12mm)
  • User manual: 1 pcs

Typical Applications

  • Electronic product assembly
  • Product development in scientific research departments
  • Electronic products maintenance
  • Electrical soldering operation
  • electronics training and repair education

Order and Configuration Notes

Please confirm rated voltage, power plug, order quantity and accessory requirements before production or shipment. For distributor orders, repair shop bundles or accessory kits, contact SAIKE with the target models and quantity so we can confirm a suitable configuration.

]]> https://en.saikecn.com/product/898d/feed 0 SAIKE 8586D Hot air soldering station https://en.saikecn.com/product/8586d https://en.saikecn.com/product/8586d#respond Tue, 07 Nov 2023 15:17:49 +0000 https://en.saikecn.com/?post_type=product&p=789 700W hot air rework station and 40W soldering station with digital display switching. Suitable for repair shops and service benches that need a practical 2 in 1 rework station.

  • 2 in 1 hot air and soldering station design
  • SET toggle display for hot air or soldering temperature
  • For SMD rework, electronics maintenance and workshop benches
Need this model for repair shop, distributor or bulk order?
Send us the required voltage, plug type, quantity and package requirement. We can help confirm standard package, accessory kit and quotation details.
Request Quote
Technical Support
]]>

Product Overview

SAIKE 8586D is a digital hot air and soldering repair station for phone repair, PCB rework and service benches.

Model Position

Choose this version when buyers want a digital combined station for regular repair work.

Key Features

  • PID temperature control tracks the working temperature quickly and supports fast temperature compensation.
  • The machine includes self-diagnosis and display/protection for over-temperature, short circuit, open circuit and overload faults.
  • A rear fuse holder and grounded metal parts help improve electrical safety.
  • The hot air gun heater uses the skeleton type ceramic heating core, and the the design supports stable operation and longer heater service life.
  • The handle of the hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the hot air gun can quickly enter the working state; Put the handle back on the handle frame, the hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
  • hot air gun uses a brushless fan as the air source, air volume is large, air volume is adjustable, gentle wind power and minimal noise.
  • Soldering iron uses 132A ceramic heating core, stable heating, rapid warming, reduce loss, long service life.
  • The soldering iron is designed with anti-static protection, to prevent electrostatic damage to sensitive SMD components.

Component Function Notes

hot air gun

By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.

  • Suitable for various kinds of soldering or desoldering work of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
  • Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Soldering Iron

The soldering iron transfers heat through the tip to melt solder for soldering and desoldering work.

  • Suitable for small solder joints or pads, such as thinner, smaller welding materials, no surrounding metal and other heat-absorbing parts.
  • For relatively thick and large solder joints and pads, you can try replacing the soldering iron tip with a larger contact area or use a hot air gun for welding.

Technical Specifications

Model 8586D
Input voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 740W
Weight 2.33kg
Inner box size 260*166*155mm
Packing quantity 8 pieces / box
Outer packing size 570*360*320mm
hot air gun
Working voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 700W
Display form LED digital (Resolution 1℃) "SET" toggle displays
Heating element Skeleton type ceramic heating core
Temperature range 100℃－480℃
Temperature stability ±1℃
Type of air flow brushless fan airflow
Gas flow 120 L/min(max)
Noise Less than 45dB
Handle length About 100cm(Including handle line)
Soldering iron
Working voltage 24V/AC
Power consumption 40W
Display form LED digital (Resolution 1℃) "SET" toggle displays
Temperature range 200℃－480℃
Heating element 132A ceramic heating core
Temperature stability ±2℃(no load)
Handle length About 100cm(Including handle line)

Standard Configuration

  • Host machine (include hot air gun handle): 1 pcs
  • hot air gun rack: 1 pcs
  • Soldering iron handle (include iron tip and heater): 1 pcs
  • Soldering iron holder (include Cleaning sponge): 1 pcs
  • Nozzles: 3 pcs (8mm, 10mm, 12*12mm)
  • User manual: 1 pcs

Typical Applications

  • Electronic product assembly
  • Product development in scientific research departments
  • Electronic products maintenance
  • Electrical soldering operation
  • electronics training and repair education

Order and Configuration Notes

Please confirm rated voltage, power plug, order quantity and accessory requirements before production or shipment. For distributor orders, repair shop bundles or accessory kits, contact SAIKE with the target models and quantity so we can confirm a suitable configuration.

]]> https://en.saikecn.com/product/8586d/feed 0 SAIKE 8586 Hot air soldering station https://en.saikecn.com/product/8586 https://en.saikecn.com/product/8586#respond Fri, 03 Nov 2023 15:37:24 +0000 https://en.saikecn.com/?post_type=product&p=673 700W hot air rework station with 40W soldering station, designed for everyday electronics repair and workshop use. A compact choice for users who need hot air and soldering in one bench tool.

  • Hot air rework and soldering station combination
  • Hot air digital display with soldering iron scale indication
  • For repair shops, training benches and general PCB repair
Need this model for repair shop, distributor or bulk order?
Send us the required voltage, plug type, quantity and package requirement. We can help confirm standard package, accessory kit and quotation details.
Request Quote
Technical Support
]]>

Product Overview

SAIKE 8586 is a combined hot air rework and soldering station for electronics repair, PCB maintenance and SMD soldering work.

Model Position

Use this model when the repair bench needs both hot air and soldering functions in one compact station.

Key Features

  • PID temperature control tracks the working temperature quickly and supports fast temperature compensation.
  • The machine includes self-diagnosis and display/protection for over-temperature, short circuit, open circuit and overload faults.
  • A rear fuse holder and grounded metal parts help improve electrical safety.
  • The hot air gun heater uses the skeleton type ceramic heating core, and the the design supports stable operation and longer heater service life.
  • The handle of the hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the hot air gun can quickly enter the working state; Put the handle back on the handle frame, the hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
  • hot air gun uses a brushless fan as the air source, air volume is large, air volume is adjustable, gentle wind power and minimal noise.
  • Soldering iron uses 132A ceramic heating core, stable heating, rapid warming, reduce loss, long service life.
  • The soldering iron is designed with anti-static protection, to prevent electrostatic damage to sensitive SMD components.

Component Function Notes

hot air gun

By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.

  • Suitable for various kinds of soldering or desoldering work of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
  • Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Soldering Iron

The soldering iron transfers heat through the tip to melt solder for soldering and desoldering work.

  • Suitable for small solder joints or pads, such as thinner, smaller welding materials, no surrounding metal and other heat-absorbing parts.
  • For relatively thick and large solder joints and pads, you can try replacing the soldering iron tip with a larger contact area or use a hot air gun for welding.

Technical Specifications

Model 8586
Input voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 740W
Weight 2.44kg
Inner box size 260*166*155mm
Packing quantity 8 pieces / box
Outer packing size 570*360*320mm
hot air gun
Working voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 700W
Display form LED digital (Resolution 1℃)
Heating element Skeleton type ceramic heating core
Temperature range 100℃－480℃
Temperature stability ±1℃
Type of air flow brushless fan airflow
Gas flow 120 L/min(max)
Noise Less than 45dB
Handle length About 100cm(Including handle line)
Soldering iron
Working voltage 24V/AC
Power consumption 40W
Display form scale indication (LED heating indicator)
Temperature range 200℃－480℃
Heating element 132A ceramic heating core
Temperature stability ±2℃(no load)
Handle length About 100cm(Including handle line)

Standard Configuration

  • Host machine (include hot air gun handle): 1 pcs
  • hot air gun rack: 1 pcs
  • Soldering iron handle (include iron tip and heater): 1 pcs
  • Soldering iron holder (include Cleaning sponge): 1 pcs
  • Nozzles: 3 pcs (8mm, 10mm, 12*12mm)
  • User manual: 1 pcs

Typical Applications

  • Electronic product assembly
  • Product development in scientific research departments
  • Electronic products maintenance
  • Electrical soldering operation
  • electronics training and repair education

Order and Configuration Notes

Please confirm rated voltage, power plug, order quantity and accessory requirements before production or shipment. For distributor orders, repair shop bundles or accessory kits, contact SAIKE with the target models and quantity so we can confirm a suitable configuration.

]]> https://en.saikecn.com/product/8586/feed 0