Hot Air Rework Station – SAIKE TOOL – Professional Hot Air Soldering Stations and Electronic Repair Equipment Supplier https://en.saikecn.com Efficient and Reliable Electronic Repair Solutions - Enhance Your Repair Efficiency, Ensuring Optimal Device Performance Wed, 10 Jul 2024 03:50:08 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://en.saikecn.com/wp-content/uploads/2023/10/ICO-66x66.jpg Hot Air Rework Station – SAIKE TOOL – Professional Hot Air Soldering Stations and Electronic Repair Equipment Supplier https://en.saikecn.com 32 32 SAIKE 863D Hot air gun rework station Air blower type https://en.saikecn.com/product/863d-air-blower https://en.saikecn.com/product/863d-air-blower#respond Thu, 09 Nov 2023 15:56:23 +0000 https://en.saikecn.com/?post_type=product&p=841 Features
1.Using microcomputer processor PID program control technology, the program tracks the actual temperature of the hot air gun at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. The machine has self-detection function, and the intelligent overtemperature, short circuit, open circuit and overload fault are displayed and protected.
3. The back of the machine is provided with a fuse holder, and the exposed metal parts of each component are connected with a ground wire to provide comprehensive protection for the safety of electricity.
4. Hot air gun heater uses a higher level of hot air technology, which can quickly heat the welding point in a short time, so that it can achieve the ideal welding effect. At the same time, its powerful wind system can effectively protect the circuit board and components to prevent overheating.
5. The handle of the Hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the Hot air gun can quickly enter the working state; Put the handle back on the handle frame, the Hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
6. Hot air gun handle comes with a one-click switch between cold air, hot air, and standby. Hold the handle and press the switch on the handle to switch the cold air or hot air mode. Press the switch for about two seconds, and the hot air gun will start to cool down and finally enter the standby state. Press the switch again for about two seconds, and the hot air gun will restart and enter the working state.
7. Hot air gun adopts the compressed motor blower as the air source, which has strong wind pressure, high air volume, adjustable air volume and low noise.
8. Hot air gun has three storage channel buttons, which can store three different temperatures and air volumes. In actual use, you can quickly switch to the specified temperature and air volume through the storage button, so as to quickly enter the working state. This design can greatly improve the work efficiency, while reducing the operation time, to avoid wasting time due to cumbersome operations.

Parameters

Model:  863D
Input voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  1000W
Weight:  4.67kg
Inner box size:  323*305*180mm
Packing quantity:  3 pieces / box
Outer packing size:  330*320*560mm
Hot air gun
Working voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  1000W
Display form:  LED digital (Resolution 1℃)
Heating element:  Skeleton type ceramic heating core
Temperature range:  100℃－500℃
Temperature stability:  ±1℃
Type of air flow:  Compressor Motor (Blower)
Gas flow:  120 L/min(max)
Noise:  Less than 45dB
Handle length:  About 100cm(Including handle line)


Standard Configuration
Host machine (include Hor air gun handle): 1 pcs
Hot air gun rack: 1 pcs
Nozzles: 3 pcs (5mm, 8mm, 10mm) Straight air outlet, 2 pcs (8mm, 10mm) Spiral air outlet.
User manual: 1 pcs

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions

About the hot air gun
By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
2. Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Related Names
BGA Rework Equipment | China Desoldering Station | Variable Temperature Soldering Station

]]> https://en.saikecn.com/product/863d-air-blower/feed 0 SAIKE 8508D Hot air gun rework station Air pump type https://en.saikecn.com/product/8508d-air-pump https://en.saikecn.com/product/8508d-air-pump#respond Thu, 09 Nov 2023 15:50:46 +0000 https://en.saikecn.com/?post_type=product&p=839 Features
1.Using microcomputer processor PID program control technology, the program tracks the actual temperature of the hot air gun at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. The machine has self-detection function, and the intelligent overtemperature, short circuit, open circuit and overload fault are displayed and protected.
3. The back of the machine is provided with a fuse holder, and the exposed metal parts of each component are connected with a ground wire to provide comprehensive protection for the safety of electricity.
4. Hot air gun heater adopts the skeleton type ceramic heating core, and the high-quality production process significantly improves the reliability and stability, and increases the working life.
5. The handle of the Hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the Hot air gun can quickly enter the working state; Put the handle back on the handle frame, the Hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
6. Hot air gun uses the air pump as the air source, the air flow pressure is large, and the silencer box is attached to reduce the noise.
7. Hot air gun has automatic and manual operating modes. Automatic mode, hot air gun on the shelf will automatically cooling standby; Manual mode, only turn off the hot air gun switch will automatically cool down and stop working; Both modes can be selected according to the requirements. (When the hot air gun is frequently used, the manual mode can be selected, saving the time of repeated heating, convenient and fast, and improving work efficiency!)

Note: Before using the new machine for the first time, please remove the air pump lock screw at the bottom of the main engine before using it. This is to prevent the air pump from shaking off during transportation, and smashing the internal circuit, so the bottom is locked by the screw, and it needs to be removed when used, so that the air pump can operate normally. Otherwise, the air pump can not vibrate normally, resulting in great noise and damage to the machine.

Parameters

Model:  8508D
Input voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  700W
Weight:  3.31kg
Inner box size:  330*274*180mm
Packing quantity:  6 pieces / box
Outer packing size:  560*345*550mm
Hot air gun
Working voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  700W
Display form:  LED digital (Resolution 1℃)
Heating element:  Skeleton type ceramic heating core
Temperature range:  100℃－450℃
Temperature stability:  ±1℃
Type of air flow:  Air pump
Gas flow:  24 L/min(max)
Noise:  Less than 45dB
Handle length:  About 100cm(Including handle line)


Standard Configuration
Host machine (include Hor air gun handle): 1 pcs
Hot air gun rack: 1 pcs
Nozzles: 3 pcs (5mm, 8mm, 10mm)
User manual: 1 pcs

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions

About the hot air gun
By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
2. Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Related Names
BGA Rework Equipment | China Desoldering Station | Variable Temperature Soldering Station

]]> https://en.saikecn.com/product/8508d-air-pump/feed 0 SAIKE 850 Hot air gun rework station Air pump type https://en.saikecn.com/product/850-air-pump https://en.saikecn.com/product/850-air-pump#respond Thu, 09 Nov 2023 15:45:42 +0000 https://en.saikecn.com/?post_type=product&p=837 Features
1.Using microcomputer processor PID program control technology, the program tracks the actual temperature of the hot air gun at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. The machine has self-detection function, and the intelligent overtemperature, short circuit, open circuit and overload fault are displayed and protected.
3. The back of the machine is provided with a fuse holder, and the exposed metal parts of each component are connected with a ground wire to provide comprehensive protection for the safety of electricity.
4. Hot air gun heater adopts the skeleton type ceramic heating core, and the high-quality production process significantly improves the reliability and stability, and increases the working life.
5. Hot air gun has the function of delay blowing cold air and automatic cooling. When the hot air gun switch is turned off, the hot air gun will stop heating. If the temperature is too high, the cold air will delay closing. It stops blowing after the temperature drops, thus extending the service life of the hot air gun.
6. Hot air gun uses the air pump as the air source, the air flow pressure is large, and the silencer box is attached to reduce the noise.

Note: Before using the new machine for the first time, please remove the air pump lock screw at the bottom of the main engine before using it. This is to prevent the air pump from shaking off during transportation, and smashing the internal circuit, so the bottom is locked by the screw, and it needs to be removed when used, so that the air pump can operate normally. Otherwise, the air pump can not vibrate normally, resulting in great noise and damage to the machine.

Parameters

Model:  850
Input voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  550W
Weight:  3.15kg
Inner box size:  330*274*180mm
Packing quantity:  6 pieces / box
Outer packing size:  560*345*550mm
Hot air gun
Working voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  550W
Display form:  Scale indication (LED heating indicator)
Heating element:  Skeleton type ceramic heating core
Temperature range:  100℃－450℃
Temperature stability:  ±1℃
Type of air flow:  Air pump
Gas flow:  24 L/min(max)
Noise:  Less than 45dB
Handle length:  About 100cm(Including handle line)


Standard Configuration
Host machine (include Hor air gun handle): 1 pcs
Hot air gun rack: 1 pcs
Nozzles: 3 pcs (5mm, 8mm, 10mm)
User manual: 1 pcs

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions

About the hot air gun
By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
2. Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Related Names
BGA Rework Equipment | China Desoldering Station | Variable Temperature Soldering Station

]]> https://en.saikecn.com/product/850-air-pump/feed 0 SAIKE 858D+ Hot air gun rework station https://en.saikecn.com/product/858d-plus https://en.saikecn.com/product/858d-plus#respond Thu, 09 Nov 2023 15:39:26 +0000 https://en.saikecn.com/?post_type=product&p=834 Features
1.Using microcomputer processor PID program control technology, the program tracks the actual temperature of the hot air gun at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. The machine has self-detection function, and the intelligent overtemperature, short circuit, open circuit and overload fault are displayed and protected.
3. The back of the machine is provided with a fuse holder, and the exposed metal parts of each component are connected with a ground wire to provide comprehensive protection for the safety of electricity.
4. Hot air gun heater adopts the skeleton type ceramic heating core, and the high-quality production process significantly improves the reliability and stability, and increases the working life.
5. The handle of the Hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the Hot air gun can quickly enter the working state; Put the handle back on the handle frame, the Hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
6. Hot air gun uses a brushless fan as the air source, air volume is large, air volume is adjustable, gentle wind power and minimal noise.
7. Hot air gun has three storage channel buttons, which can store three different temperatures. In actual use, you can quickly switch to the specified temperature the storage button, so as to quickly enter the working state. This design can greatly improve the work efficiency, while reducing the operation time, to avoid wasting time due to cumbersome operations.

Parameters

Model:  858D+
Input voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  700W
Weight:  1.78kg
Inner box size:  260*166*155mm
Packing quantity:  12 pieces / box
Outer packing size:  540*350*480mm
Hot air gun
Working voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  700W
Display form:  LED digital (Resolution 1℃)
Heating element:  Skeleton type ceramic heating core
Temperature range:  100℃－500℃
Temperature stability:  ±1℃
Type of air flow:  Brushless fan soft wind
Gas flow:  120 L/min(max)
Noise:  Less than 45dB
Handle length:  About 100cm(Including handle line)


Standard Configuration
Host machine (include Hor air gun handle): 1 pcs
Hot air gun rack: 1 pcs
Nozzles: 4 pcs (5mm, 8mm, 10mm, 12*12mm)
User manual: 1 pcs

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions

About the hot air gun
By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
2. Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Related Names
BGA Rework Equipment | China Desoldering Station | Variable Temperature Soldering Station

]]> https://en.saikecn.com/product/858d-plus/feed 0 SAIKE 858D Hot air gun rework station https://en.saikecn.com/product/858d https://en.saikecn.com/product/858d#respond Thu, 09 Nov 2023 15:34:52 +0000 https://en.saikecn.com/?post_type=product&p=832 Features
1.Using microcomputer processor PID program control technology, the program tracks the actual temperature of the hot air gun at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. The machine has self-detection function, and the intelligent overtemperature, short circuit, open circuit and overload fault are displayed and protected.
3. The back of the machine is provided with a fuse holder, and the exposed metal parts of each component are connected with a ground wire to provide comprehensive protection for the safety of electricity.
4. Hot air gun heater adopts the skeleton type ceramic heating core, and the high-quality production process significantly improves the reliability and stability, and increases the working life.
5. The handle of the Hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the Hot air gun can quickly enter the working state; Put the handle back on the handle frame, the Hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
6. Hot air gun uses a brushless fan as the air source, air volume is large, air volume is adjustable, gentle wind power and minimal noise.

Parameters

Model:  858D
Input voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  700W
Weight:  1.72kg
Inner box size:  260*166*155mm
Packing quantity:  12 pieces / box
Outer packing size:  540*350*480mm
Hot air gun
Working voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  700W
Display form:  LED digital (Resolution 1℃)
Heating element:  Skeleton type ceramic heating core
Temperature range:  100℃－500℃
Temperature stability:  ±1℃
Type of air flow:  Brushless fan soft wind
Gas flow:  120 L/min(max)
Noise:  Less than 45dB
Handle length:  About 100cm(Including handle line)


Standard Configuration
Host machine (include Hor air gun handle): 1 pcs
Hot air gun rack: 1 pcs
Nozzles: 4 pcs (5mm, 8mm, 10mm, 12*12mm)
User manual: 1 pcs

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions

About the hot air gun
By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
2. Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Related Names
BGA Rework Equipment | China Desoldering Station | Variable Temperature Soldering Station

]]> https://en.saikecn.com/product/858d/feed 0 SAIKE 858 Hot air gun rework station https://en.saikecn.com/product/858 https://en.saikecn.com/product/858#respond Thu, 09 Nov 2023 15:29:05 +0000 https://en.saikecn.com/?post_type=product&p=827 Features
1.Using microcomputer processor PID program control technology, the program tracks the actual temperature of the hot air gun at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. The machine has self-detection function, and the intelligent overtemperature, short circuit, open circuit and overload fault are displayed and protected.
3. The back of the machine is provided with a fuse holder, and the exposed metal parts of each component are connected with a ground wire to provide comprehensive protection for the safety of electricity.
4. Hot air gun heater adopts the skeleton type ceramic heating core, and the high-quality production process significantly improves the reliability and stability, and increases the working life.
5. The handle of the Hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the Hot air gun can quickly enter the working state; Put the handle back on the handle frame, the Hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
6. Hot air gun uses a brushless fan as the air source, air volume is large, air volume is adjustable, gentle wind power and minimal noise.

Parameters

Model:  858
Input voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  700W
Weight:  1.72kg
Inner box size:  260*166*155mm
Packing quantity:  12 pieces / box
Outer packing size:  540*350*480mm
Hot air gun
Working voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  700W
Display form:  Scale indication (LED heating indicator)
Heating element:  Skeleton type ceramic heating core
Temperature range:  100℃－450℃
Temperature stability:  ±1℃
Type of air flow:  Brushless fan soft wind
Gas flow:  120 L/min(max)
Noise:  Less than 45dB
Handle length:  About 100cm(Including handle line)


Standard Configuration
Host machine (include Hor air gun handle): 1 pcs
Hot air gun rack: 1 pcs
Nozzles: 4 pcs (5mm, 8mm, 10mm, 12*12mm)
User manual: 1 pcs

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions

About the hot air gun
By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
2. Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Related Names
BGA Rework Equipment | China Desoldering Station | Variable Temperature Soldering Station

]]> https://en.saikecn.com/product/858/feed 0 SAIKE 868D Hot air gun rework station https://en.saikecn.com/product/saike-868d-hot-air-gun-rework-station https://en.saikecn.com/product/saike-868d-hot-air-gun-rework-station#respond Wed, 26 Jun 2024 04:14:04 +0000 https://en.saikecn.com/?post_type=product&p=4087 Features
1.Using microcomputer processor PID program control technology, the program tracks the actual temperature of the hot air gun at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. The machine has self-detection function, and the intelligent overtemperature, short circuit, open circuit and overload fault are displayed and protected.
3. The machine is provided with a fuse inside, and the exposed metal parts of each component are connected with a ground wire to provide comprehensive protection for the safety of electricity.
4. The machine adopts the design without independent transformer, which makes the fuselage lighter and improves the transportation performance.
5. Hot air gun heater adopts the skeleton type ceramic heating core, and the high-quality production process significantly improves the reliability and stability, and increases the working life.
6. The handle of the Hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the Hot air gun can quickly enter the working state; Put the handle back on the handle frame, the Hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
7. Hot air gun uses a brushless fan as the air source, air volume is large, air volume is adjustable, gentle wind power and minimal noise.

Parameters

Model:  868D
Input voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  700W
Weight:  1.36kg
Inner box size:  260*165*152mm
Packing quantity:  6 pieces / box
Outer packing size:  350*275*500mm
Hot air gun
Working voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  700W
Display form:  LED digital (Resolution 1℃)
Heating element:  Skeleton type ceramic heating core
Temperature range:  100℃－480℃
Temperature stability:  ±1℃
Type of air flow:  Brushless fan soft wind
Gas flow:  120 L/min(max)
Noise:  Less than 45dB
Handle length:  About 100cm(Including handle line)


Standard Configuration
Host machine (include Hor air gun handle): 1 pcs
Hot air gun rack: 1 pcs
Nozzles: 3 pcs (8mm, 10mm, 12*12mm)
User manual: 1 pcs

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions

About the hot air gun
By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
2. Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Related Names
BGA Rework Equipment | China Desoldering Station | Variable Temperature Soldering Station

]]> https://en.saikecn.com/product/saike-868d-hot-air-gun-rework-station/feed 0 SAIKE 8858 Portable Hot air gun rework station https://en.saikecn.com/product/8858 https://en.saikecn.com/product/8858#respond Thu, 09 Nov 2023 15:23:16 +0000 https://en.saikecn.com/?post_type=product&p=825 Features
1. Using microcomputer processor PID program control technology, the program tracks the actual temperature of the hot air gun at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. The machine has self-detection function, and the intelligent overtemperature, short circuit, open circuit and overload fault are displayed and protected.
3. The machine is connected with a ground wire to provide comprehensive protection for the safety of electricity.
4. Machine portable design, small size, light weight, easy to carry, simple operation.
5. Hot air gun heater adopts the skeleton type ceramic heating core, and the high-quality production process significantly improves the reliability and stability, and increases the working life.
6. The handle of the Hot air gun is equipped with an induction device, as long as the handle is picked up from the handle frame, the Hot air gun can quickly enter the working state; Put the handle back on the handle frame, the Hot air gun will stop heating, delay blowing cold air to cool down, and finally enter the standby state; Convenient real-time operation, while extending the service life of the heater.
7. Hot air gun uses a brushless fan as the air source, air volume is large, air volume is adjustable, gentle wind power and minimal noise.

Parameters

Model:  8858
Input voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  700W
Weight:  0.93kg
Inner box size:  260*140*85mm
Packing quantity:  16 pieces / box
Outer packing size:  560*310*360mm
Hot air gun
Working voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  700W
Display form:  LED digital (Resolution 1℃)
Heating element:  Skeleton type ceramic heating core
Temperature range:  100℃－480℃
Temperature stability:  ±1℃
Type of air flow:  Brushless fan soft wind
Gas flow:  120 L/min(max)
Noise:  Less than 45dB
Handle length:  About 100cm(Including handle line)


Standard Configuration
Host machine (include Hor air gun handle): 1 pcs
Hot air gun rack: 1 pcs
Nozzles: 4 pcs (5mm, 8mm, 10mm, 12*12mm)
User manual: 1 pcs

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions

About the hot air gun
By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
2. Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Related Names
BGA Rework Equipment | China Desoldering Station | Variable Temperature Soldering Station

]]> https://en.saikecn.com/product/8858/feed 0 SAIKE 8058 Portable Hot air gun rework station https://en.saikecn.com/product/8058 https://en.saikecn.com/product/8058#respond Thu, 09 Nov 2023 15:19:19 +0000 https://en.saikecn.com/?post_type=product&p=823 Features
1. Using microcomputer processor PID program control technology, the program tracks the actual temperature of the hot air gun at a high speed in milliseconds, the fast temperature compensation speed enhances the temperature stability, the temperature static error is small, the temperature compensation is fast, and can adapt to various harsh environments.
2. The machine has self-detection function, and the intelligent overtemperature, short circuit, open circuit and overload fault are displayed and protected.
3. The machine is connected with a ground wire to provide comprehensive protection for the safety of electricity.
4. Machine portable design, small size, light weight, easy to carry, simple operation.
5. Hot air gun heater adopts the skeleton type ceramic heating core, and the high-quality production process significantly improves the reliability and stability, and increases the working life.
6. Hot air gun has the function of delay blowing cold air and automatic cooling. When the hot air gun switch is turned off, the hot air gun will stop heating. If the temperature is too high, the cold air will delay closing. It stops blowing after the temperature drops, thus extending the service life of the hot air gun.
7. Hot air gun adopts the blower as the air source, which has strong wind pressure, high air volume, adjustable air volume and low noise.

Parameters

Model:  8058
Input voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  650W
Weight:  0.63kg
Inner box size:  365*132*67mm
Packing quantity:  24 pieces / box
Outer packing size:  500*350*440mm
Hot air gun
Working voltage:  220V~240V/AC, 50Hz  (110V/AC, 60Hz)
Power consumption:  650W
Display form:  LED digital (Resolution 1℃)
Heating element:  Skeleton type ceramic heating core
Temperature range:  100℃－480℃
Temperature stability:  ±1℃
Type of air flow:  Blower
Gas flow:  120 L/min(max)
Noise:  Less than 45dB
Handle length:  About 140cm(Including handle line)


Standard Configuration
Host machine (include Hor air gun handle): 1 pcs
Hot air gun rack: 1 pcs
Nozzles: 3 pcs (8mm, 10mm, 12*12mm)
User manual: 1 pcs

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions

About the hot air gun
By generating a hot air flow, the solder is heated to a molten state, thus achieving welding, heat shrinkage, removal and other operations.
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. (especially suitable for mobile phone wiring and wiring base sealing-off).
2. Can also be used for heat shrinkage, drying, paint removal, adhesion removal, thawing, preheating, glue welding, etc.

Related Names
BGA Rework Equipment | China Desoldering Station | Variable Temperature Soldering Station

]]> https://en.saikecn.com/product/8058/feed 0