Desoldering Station – SAIKE TOOL – Professional Hot Air Soldering Stations and Electronic Repair Equipment Supplier https://en.saikecn.com Efficient and Reliable Electronic Repair Solutions - Enhance Your Repair Efficiency, Ensuring Optimal Device Performance Sun, 14 Jun 2026 16:32:25 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://en.saikecn.com/wp-content/uploads/2023/10/ICO-66x66.jpg Desoldering Station – SAIKE TOOL – Professional Hot Air Soldering Stations and Electronic Repair Equipment Supplier https://en.saikecn.com 32 32 SAIKE 201B High Frequency Desoldering Station with Vacuum Pen https://en.saikecn.com/product/201b https://en.saikecn.com/product/201b#respond Fri, 10 Nov 2023 15:23:31 +0000 https://en.saikecn.com/?post_type=product&p=850 Need this model for repair shop, distributor or bulk order?
Send us the required voltage, plug type, quantity and package requirement. We can help confirm standard package, accessory kit and quotation details.
Request Quote
Technical Support ]]>

Product Overview

SAIKE 201B is a high-frequency desoldering station with Desoldering Gun and vacuum pen support, suitable for component removal, board repair and service benches that need stronger desoldering assistance.

Model Position

Use 201B for workshops that need a desoldering-focused station with additional vacuum handling capability.

Key Features

  • PID temperature control tracks the working temperature quickly and supports fast temperature compensation.
  • The machine includes self-diagnosis and display/protection for over-temperature, short circuit, open circuit and overload faults.
  • A rear fuse holder and grounded metal parts help improve electrical safety.
  • Desoldering Gun adopted 201B Desoldering Gun high-frequency ceramic heating core, provide more powerful power and high efficiency speed of temperature compensation. This allows the Desoldering Gun to quickly and accurately complete the welding task, especially suitable for dismantling large solder joints, rough blocks, ultra-thick, oversized circuit boards and electronic components that need to be removed and replaced.
  • The Desoldering Gun uses vacuum pump as the air source, strong suction and low noise.
  • Desoldering Gun part is anti-static design, to prevent electrostatic damage to sensitive SMD components.
  • Desoldering Gun has a sleep function (which can be turned on or off) for a preset time of 1 to 99 minutes. When no one is in use, the Desoldering Gun is in a quiescent state, and when the preset time is reached, the Desoldering Gun will go to sleep.
  • Desoldering Gun has the automatic shutdown function. When the Desoldering Gun enters the dormancy state for 1 to 30 minutes (the time range can be set), the Desoldering Gun will automatically shut down and display "–", and the heating will resume after restarting the power supply.
  • Desoldering Gun has password protection function, enter the function parameters to set, you must enter the password. Only after entering the correct password can you change the function parameters, to prevent the operator from changing and affecting the operation efficiency.
  • Using Ferro-alloy Desoldering Gun holder, durable, avoid burns.
  • Equipped with a vacuum suction pen, it can be used alternately with the Desoldering Gun through the vacuum suction port to help remove the IC.

Component Function Notes

Desoldering Gun

The heated suction tip melts solder at the joint. The vacuum pump then draws the molten solder into the collection chamber for component desoldering. This tool is often used to repair and assemble electronic equipment, especially where components need to be replaced or circuits repaired. It removes solder quickly and accurately, increasing work efficiency while also protecting circuit boards and other electronic components from damage.

  • Suitable for a variety of upright components and other special desoldering, especially suitable for multi-pin through-hole components (such as transformers, LCD screens, digital tubes, integrated chips, pins, etc.) welding.

Operation Guide

Warm Reminder

When using the Desoldering Gun, the display temperature flashes (preheating), only when the temperature reaches the set temperature, the display stops flashing (preheating is complete), the vacuum pump can work.

Technical Specifications

Model 201B
Input voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 170W
Weight 5.44kg
Inner box size 350*275*160mm
Packing quantity 4 pieces / box
Outer packing size 575*365*380mm
Desoldering Gun
Working voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 170W
Display form LED digital (Resolution 1℃)
Heating element 201B High frequency heating ceramic heating core
Temperature range 380℃－480℃
Temperature stability ±1℃
Type of air flow Vacuum pump
Suction Pressure 0.05MPa
Noise Less than 45dB
Handle length About 100cm (Including handle line)

Standard Configuration

  • Host machine: 1 pcs
  • Desoldering Gun handle (include 1.0mm Suction tip and heater): 1 pcs
  • Desoldering Gun holder (include Cleaning sponge): 1 pcs
  • Suction tip: 2 pcs (0.8mm, 1.2mm)
  • Vacuum suction pen(include Straight suction tip and curved suction tip): 1 pcs
  • Suction cup: 4 pcs (Extremely small, Small, Medium, Large)
  • User manual: 1 pcs

Typical Applications

  • Electronic product assembly
  • Product development in scientific research departments
  • Electronic products maintenance
  • Electrical soldering operation
  • electronics training and repair education

Order and Configuration Notes

Please confirm rated voltage, power plug, order quantity and accessory requirements before production or shipment. For distributor orders, repair shop bundles or accessory kits, contact SAIKE with the target models and quantity so we can confirm a suitable configuration.

]]> https://en.saikecn.com/product/201b/feed 0 SAIKE 201A+ Desoldering Station https://en.saikecn.com/product/201a-plus https://en.saikecn.com/product/201a-plus#respond Fri, 10 Nov 2023 15:20:33 +0000 https://en.saikecn.com/?post_type=product&p=849 Need this model for repair shop, distributor or bulk order?
Send us the required voltage, plug type, quantity and package requirement. We can help confirm standard package, accessory kit and quotation details.
Request Quote
Technical Support ]]>

Product Overview

SAIKE 201A+ is a desoldering station for removing solder from through-hole components, connectors and repair boards.

Model Position

Use this model when the main task is desoldering rather than hot air rework.

Key Features

  • PID temperature control tracks the working temperature quickly and supports fast temperature compensation.
  • The machine includes self-diagnosis and display/protection for over-temperature, short circuit, open circuit and overload faults.
  • A rear fuse holder and grounded metal parts help improve electrical safety.
  • The Desoldering Gun uses 201A Desoldering Gun ceramic heating core, which has peak heating, fast heating and fast temperature compensation functions, making it suitable for desoldering circuit boards, electronic components such as work that requires component removal and replacement.
  • Desoldering Gun uses vacuum pump as the air source, strong suction and low noise.
  • Desoldering Gun part is anti-static design, to prevent electrostatic damage to sensitive SMD components.
  • Desoldering Gun and Soldering iron has a 10-minute fixed hibernation function. When no one is in use, the Desoldering Gun or soldering iron is at rest, After about 10 minutes, the Desoldering Gun or soldering iron will enter the hibernation state.
  • Desoldering Gun and soldering iron can be used alternately by switching.
  • Soldering iron uses 131A ceramic heating core, peak heating, rapid heating, and fast temperature compensation function. Therefore, it is very suitable for the desoldering of various solder joints, especially for the desoldering of large solder joints, rough blocks and miscellaneous difficult solder joints.
  • The soldering iron is designed with anti-static protection, to prevent electrostatic damage to sensitive SMD components.
  • Using Ferro-alloy Desoldering Gun and Soldering iron in one holder, durable, avoid burns.

Component Function Notes

Desoldering Gun

The heated suction tip melts solder at the joint. The vacuum pump then draws the molten solder into the collection chamber for component desoldering. This tool is often used to repair and assemble electronic equipment, especially where components need to be replaced or circuits repaired. It removes solder quickly and accurately, increasing work efficiency while also protecting circuit boards and other electronic components from damage.

  • Suitable for a variety of upright components and other special desoldering, especially suitable for multi-pin through-hole components (such as transformers, LCD screens, digital tubes, integrated chips, pins, etc.) welding.

Soldering Iron

The soldering iron transfers heat through the tip to melt solder for soldering and desoldering work.

  • Suitable for relatively larger solder joints or pads to provide enough heat for better completion of welding operations.
  • For thicker and larger solder joints and pads, you can try replacing the soldering iron tip with a larger contact area or use a hot air gun for welding.

Operation Guide

Warm Reminder

When using the Desoldering Gun, the display temperature flashes (preheating), only when the temperature reaches the set temperature, the display stops flashing and (beep) sounds (preheating is complete), the vacuum pump can work.

Technical Specifications

Model 201A+
Input voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 150W
Weight 4.74kg
Inner box size 350*275*160mm
Packing quantity 4 pieces / box
Outer packing size 575*365*380mm
Desoldering Gun
Working voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 90W
Display form LED digital (Resolution 1℃)
Heating element 201A Ceramic heating core
Temperature range 350℃－480℃
Temperature stability ±1℃
Type of air flow Vacuum pump
Suction Pressure 0.05MPa
Noise Less than 45dB
Handle length About 100cm (Including handle line)
Soldering iron
Working voltage 24V/AC
Rated power 22W
Power consumption 60W
Maximum power 120W
Display form LED digital (Resolution 1℃)
Temperature range 200℃－480℃
Heating element 131A ceramic heating core
Temperature stability ±2℃(no load)
Handle length About 100cm (Including handle line)

Standard Configuration

  • Host machine: 1 pcs
  • Desoldering Gun handle (include 1.0mm Suction tip and heater): 1 pcs
  • Soldering iron handle (include iron tip and heater): 1 pcs
  • Desoldering Gun and Soldering iron in one holder (include Cleaning sponge): 1 pcs
  • Suction tip: 1 pcs (1.2mm)
  • User manual: 1 pcs

Typical Applications

  • Electronic product assembly
  • Product development in scientific research departments
  • Electronic products maintenance
  • Electrical soldering operation
  • electronics training and repair education

Order and Configuration Notes

Please confirm rated voltage, power plug, order quantity and accessory requirements before production or shipment. For distributor orders, repair shop bundles or accessory kits, contact SAIKE with the target models and quantity so we can confirm a suitable configuration.

]]> https://en.saikecn.com/product/201a-plus/feed 0 SAIKE 201A Desoldering Station https://en.saikecn.com/product/201a https://en.saikecn.com/product/201a#respond Fri, 10 Nov 2023 15:18:34 +0000 https://en.saikecn.com/?post_type=product&p=848 Need this model for repair shop, distributor or bulk order?
Send us the required voltage, plug type, quantity and package requirement. We can help confirm standard package, accessory kit and quotation details.
Request Quote
Technical Support ]]>

Product Overview

SAIKE 201A is a desoldering station with Desoldering Gun, designed for removing solder from through-hole components, repair boards, connector pins and similar desoldering work.

Model Position

Choose 201A when the main task is desoldering rather than hot air rework.

Key Features

  • PID temperature control tracks the working temperature quickly and supports fast temperature compensation.
  • The machine includes self-diagnosis and display/protection for over-temperature, short circuit, open circuit and overload faults.
  • A rear fuse holder and grounded metal parts help improve electrical safety.
  • The The Desoldering Gun uses 201A Desoldering Gun ceramic heating core, which has peak heating, fast heating and fast temperature compensation functions, making it suitable for desoldering circuit boards, electronic components such as work that requires component removal and replacement.
  • The Desoldering Gun uses vacuum pump as the air source, strong suction and low noise.
  • Desoldering Gun part is anti-static design, to prevent electrostatic damage to sensitive SMD components.
  • Desoldering Gun has a 10-minute fixed hibernation function. When no one is in use, the Desoldering Gun is at rest, After about 10 minutes, the Desoldering Gun will enter the hibernation state.
  • Using Ferro-alloy Desoldering Gun holder, durable, avoid burns.

Component Function Notes

Desoldering Gun

The heated suction tip melts solder at the joint. The vacuum pump then draws the molten solder into the collection chamber for component desoldering. This tool is often used to repair and assemble electronic equipment, especially where components need to be replaced or circuits repaired. It removes solder quickly and accurately, increasing work efficiency while also protecting circuit boards and other electronic components from damage.

  • Suitable for a variety of upright components and other special desoldering, especially suitable for multi-pin through-hole components (such as transformers, LCD screens, digital tubes, integrated chips, pins, etc.) welding.

Operation Guide

Warm Reminder

When using the Desoldering Gun, the display temperature flashes (preheating), only when the temperature reaches the set temperature, the display stops flashing and (beep) sounds (preheating is complete), the vacuum pump can work.

Technical Specifications

Model 201A
Input voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 90W
Weight 4.5kg
Inner box size 350*275*160mm
Packing quantity 4 pieces / box
Outer packing size 575*365*380mm
Desoldering Gun
Working voltage 220V~240V/AC, 50Hz (110V/AC, 60Hz)
Power consumption 90W
Display form LED digital (Resolution 1℃)
Heating element 201A Ceramic heating core
Temperature range 350℃－480℃
Temperature stability ±1℃
Type of air flow Vacuum pump
Suction Pressure 0.05MPa
Noise Less than 45dB
Handle length About 100cm (Including handle line)

Standard Configuration

  • Host machine: 1 pcs
  • Desoldering Gun handle (include 1.0mm Suction tip and heater): 1 pcs
  • Desoldering Gun holder (include Cleaning sponge): 1 pcs
  • Suction tip: 1 pcs (1.2mm)
  • User manual: 1 pcs

Typical Applications

  • Electronic product assembly
  • Product development in scientific research departments
  • Electronic products maintenance
  • Electrical soldering operation
  • electronics training and repair education

Order and Configuration Notes

Please confirm rated voltage, power plug, order quantity and accessory requirements before production or shipment. For distributor orders, repair shop bundles or accessory kits, contact SAIKE with the target models and quantity so we can confirm a suitable configuration.

]]> https://en.saikecn.com/product/201a/feed 0