Features
SAIKE 909D++ soldering rework station with power supply is made with the latest SMD technology. It has a dual LED display to show the temperature of hot air gun and electric soldering iron. Coupled with the PID program, the temperature can be precisely controlled. Our equipment also has the advanced short circuit protection function. Furthermore, it can test and output voltage.
Adopts the high power soldering iron and the power supply part has 15V 2A. It is suitable for the high-end users, and can meet the requirements of special application environment.
1. This products is designed based on market research needs of three in one tool.it combines together in one common tool (soldering station,hot air rework, and power supply for repairing mobile phones), there kind of function can be used independent switch or simultaneously, it occupies less area, practical and saves energy, and the product’s performance is improved.
2. The product uses double-sided fiberglass circuit board material, the compon- ents installation processes are performed orderly to ensure the clarity of electric signal flow.
3. Soldering iron.Hot air rework station and DC power supply are using independent dual-core micro-controller,which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
4. Soldering iron Hot air rework used for sensor closed loop circuit, micro-computer zero trigger-controlled temperature, LED display. Larger power, temperature heating goes up quickly, temperature accuracy and stability, avoid to airflow impact, its really lead-free soldering and desoldering. Machine’s parts has self-detection devices, full-intelligent’s over – temperature, short circuit, open circuit, overload etc. Failure of display and protection function.
5. The soldering station, Hot air rework’s temperature are using Intelligent Fuzzy PID control, the exact LED digital display temperature of hot air rework and soldering iron. The program keep tracking of the actual temperature of hot air rework and soldering iron, temperature compensation very quickly, this will further enhance temperature stability.Therefore the temperature steady-state error is relatively small, temperature compensations quickly and can adapt to all kinds of harsh environment.
6. Hot air rework with sensor switch, as long as handgrip thehandle, the system can enter into working mode quickly; handle released into the handle frame, the system will enter into standby mode, operating conveniently,it can prolong heating elements life and protect the hot air gun.
7. Hot air gun use for high – quality heating elements , under the same power, its efficiency can be arrive doubled, which can effectively extend the service life of heating elements and power savings. Outlet way is brushless fan gentle wind and diaphragm pump spiral wind, two type foryourchoose.lt has long life, minimal noise and airvolumecan be adjusted continuously.
8. Power supply part of the recovery with continuous protection to avoid various unexpected burning mobile the phenomenon of interference.
9. USB tape with USB output, can connect phone conveniently meanwhile, the current outplay is 4 LED display, can precise to MN to meet the client need.
10. USB type soldering iron with iron dormancy feature. The micro-computer control prodrome can check the working condition. When the iron is no used more that 10 min. The iron would enter in to dormancy the TEMP, would decrease to 200°C. At that time, would display l’SLP” which could save life and power.
11. Hot air gun Auto/ Manuel feature
a. If choose Auto function, the gun back to the bracket, the machine would cooling down auto martially which could prefect the heater and environment. When turn on the machine again, It would be more safety can effectively avoid some accident arise under the unaware.
b. If choose manual function , even the gun back to bracket, the TEMP, wouldn^ be clown which is suitable for long use of work. Save time and effective. Consider safety. Put the gun to Auto function after finished the works.
12. The mach in not only can repair phone as power supply, but also can test the other voltage.
13. Iron with anti-Static design can prevent the SMD components.
14. Easy to operate.

Standard Configuration
Machine (include Air gun handle): 1set
Air gun Handle Frame: 1pc
Soldering Iron Handle (include iron tips and heater): 1pc
Iron Holder: 1pc
High Temperature Resistant Sponge: 1pc
Nozzles: 4pcs (5mm, 8mm, 10mm, 13*13mm)
Power Supply Test Line: 1pc
Table Pen: 1pc
Power Plug: 1pc
User manual: 1pc

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions
Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA,SMD, etc. (especially mobile phone’s cable).
Shrinking, drying Paint drying, adhesive removal, thawing, warming, Plastic welding.

Related Names
Hot Air Gun Soldering Station | PCB Repair Kit | Precision Soldering Equipment

Features
SAIKE 909D+ soldering rework station with power supply is made with the latest SMD technology. It has a dual LED display to show the temperature of hot air gun and electric soldering iron. Coupled with the PID program, the temperature can be precisely controlled. Our equipment also has the advanced short circuit protection function. Furthermore, it can test the voltage and mobile RF signal.
Adopts the high power soldering iron and the power supply part has 15V 3A. It is suitable for the high-end users, and can meet the requirements of special application environment.
1. This products is designed based on market research needs of three in one tool.it combines together in one common tool (soldering station,hot air rework, and power supply for repairing mobile phones), there kind of function can be used independent switch or simultaneously, it occupies less area, practical and saves energy, and the product’s performance is improved.
2. The product uses double-sided fiberglass circuit board material, the compon- ents installation processes are performed orderly to ensure the clarity of electric signal flow.
3. Soldering iron.Hot air rework station and DC power supply are using independent dual-core micro-controller,which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
4. Soldering iron Hot air rework used for sensor closed loop circuit, micro-computer zero trigger-controlled temperature, LED display. Larger power, temperature heating goes up quickly, temperature accuracy and stability, avoid to airflow impact, its really lead-free soldering and desoldering. Machine’s parts has self-detection devices, full-intelligent’s over – temperature, short circuit, open circuit, overload etc. Failure of display and protection function.
5. The soldering station, Hot air rework’s temperature are using Intelligent Fuzzy PID control, the exact LED digital display temperature of hot air rework and soldering iron. The program keep tracking of the actual temperature of hot air rework and soldering iron, temperature compensation very quickly, this will further enhance temperature stability.Therefore the temperature steady-state error is relatively small, temperature compensations quickly and can adapt to all kinds of harsh environment.
6. Hot air rework with sensor switch, as long as handgrip thehandle, the system can enter into working mode quickly; handle released into the handle frame, the system will enter into standby mode, operating conveniently,it can prolong heating elements life and protect the hot air gun.
7. Hot air gun use for high – quality heating elements , under the same power, its efficiency can be arrive doubled, which can effectively extend the service life of heating elements and power savings. Outlet way is brushless fan gentle wind and diaphragm pump spiral wind, two type foryourchoose.lt has long life, minimal noise and airvolumecan be adjusted continuously.
8. Power supply part of the recovery with continuous protection to avoid various unexpected burning mobile the phenomenon of interference.

Standard Configuration
Machine (include Air gun handle): 1set
Air gun Handle Frame: 1pc
Soldering Iron Handle (include iron tips and heater): 1pc
Iron Holder: 1pc
High Temperature Resistant Sponge: 1pc
Nozzles: 4pcs (5mm, 8mm, 10mm, 13*13mm)
Power Supply Test Line: 1pc
Table Pen: 1pc
Power Plug: 1pc
User manual: 1pc

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions
Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA,SMD, etc. (especially mobile phone’s cable).
Shrinking, drying Paint drying, adhesive removal, thawing, warming, Plastic welding.

Related Names
Low Temperature Lead Free Soldering Tool | Electronics Soldering Device | Thermostat Soldering Station

Features
SAIKE 909D soldering rework station with power supply is made with the latest SMD technology. It has a dual LED display to show the temperature of hot air gun and electric soldering iron. Coupled with the PID program, the temperature can be precisely controlled. Our equipment also has the advanced short circuit protection function. Furthermore, it can test and output voltage.
1. This products is designed based on market research needs of three in one tool.it combines together in one common tool (soldering station,hot air rework, and power supply for repairing mobile phones), there kind of function can be used independent switch or simultaneously, it occupies less area, practical and saves energy, and the product’s performance is improved.
2. The product uses double-sided fiberglass circuit board material, the compon- ents installation processes are performed orderly to ensure the clarity of electric signal flow.
3. Soldering iron.Hot air rework station and DC power supply are using independent dual-core micro-controller,which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
4. Soldering iron Hot air rework used for sensor closed loop circuit, micro-computer zero trigger-controlled temperature, LED display. Larger power, temperature heating goes up quickly, temperature accuracy and stability, avoid to airflow impact, its really lead-free soldering and desoldering. Machine’s parts has self-detection devices, full-intelligent’s over – temperature, short circuit, open circuit, overload etc. Failure of display and protection function.
5. The soldering station, Hot air rework’s temperature are using Intelligent Fuzzy PID control, the exact LED digital display temperature of hot air rework and soldering iron. The program keep tracking of the actual temperature of hot air rework and soldering iron, temperature compensation very quickly, this will further enhance temperature stability.Therefore the temperature steady-state error is relatively small, temperature compensations quickly and can adapt to all kinds of harsh environment.
6. Hot air rework with sensor switch, as long as handgrip thehandle, the system can enter into working mode quickly; handle released into the handle frame, the system will enter into standby mode, operating conveniently,it can prolong heating elements life and protect the hot air gun.
7. Hot air gun use for high – quality heating elements , under the same power, its efficiency can be arrive doubled, which can effectively extend the service life of heating elements and power savings. Outlet way is brushless fan gentle wind and diaphragm pump spiral wind, two type foryourchoose.lt has long life, minimal noise and airvolumecan be adjusted continuously.
8. Power supply part of the recovery with continuous protection to avoid various unexpected burning mobile the phenomenon of interference.

Standard Configuration
Machine (include Air gun handle): 1set
Air gun Handle Frame: 1pc
Soldering Iron Handle (include iron tips and heater): 1pc
Iron Holder: 1pc
High Temperature Resistant Sponge: 1pc
Nozzles: 4pcs (5mm, 8mm, 10mm, 13*13mm)
Power Supply Test Line: 1pc
Table Pen: 1pc
Power Plug: 1pc
User manual: 1pc

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions
Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA,SMD, etc. (especially mobile phone’s cable).
Shrinking, drying Paint drying, adhesive removal, thawing, warming, Plastic welding.

Related Names
Hot Air Gun Soldering Station | PCB Repair Kit | Precision Soldering Equipment

Features
SAIKE 909D soldering rework station with power supply is made with the latest SMD technology. It has a dual LED display to show the temperature of hot air gun and electric soldering iron. Coupled with the PID program, the temperature can be precisely controlled. Our equipment also has the advanced short circuit protection function. Furthermore, it can test and output voltage.
1. This products is designed based on market research needs of three in one tool.it combines together in one common tool (soldering station,hot air rework, and power supply for repairing mobile phones), there kind of function can be used independent switch or simultaneously, it occupies less area, practical and saves energy, and the product’s performance is improved.
2. The product uses double-sided fiberglass circuit board material, the compon- ents installation processes are performed orderly to ensure the clarity of electric signal flow.
3. Soldering iron.Hot air rework station and DC power supply are using independent dual-core micro-controller,which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
4. Soldering iron Hot air rework used for sensor closed loop circuit, micro-computer zero trigger-controlled temperature, LED display. Larger power, temperature heating goes up quickly, temperature accuracy and stability, avoid to airflow impact, its really lead-free soldering and desoldering. Machine’s parts has self-detection devices, full-intelligent’s over – temperature, short circuit, open circuit, overload etc. Failure of display and protection function.
5. The soldering station, Hot air rework’s temperature are using Intelligent Fuzzy PID control, the exact LED digital display temperature of hot air rework and soldering iron. The program keep tracking of the actual temperature of hot air rework and soldering iron, temperature compensation very quickly, this will further enhance temperature stability.Therefore the temperature steady-state error is relatively small, temperature compensations quickly and can adapt to all kinds of harsh environment.
6. Hot air rework with sensor switch, as long as handgrip thehandle, the system can enter into working mode quickly; handle released into the handle frame, the system will enter into standby mode, operating conveniently,it can prolong heating elements life and protect the hot air gun.
7. Hot air gun use for high – quality heating elements , under the same power, its efficiency can be arrive doubled, which can effectively extend the service life of heating elements and power savings. Outlet way is brushless fan gentle wind and diaphragm pump spiral wind, two type foryourchoose.lt has long life, minimal noise and airvolumecan be adjusted continuously.
8. Power supply part of the recovery with continuous protection to avoid various unexpected burning mobile the phenomenon of interference.

Standard Configuration
Machine (include Air gun handle): 1set
Air gun Handle Frame: 1pc
Soldering Iron Handle (include iron tips and heater): 1pc
Iron Holder: 1pc
High Temperature Resistant Sponge: 1pc
Nozzles: 4pcs (5mm, 8mm, 10mm, 13*13mm)
Power Supply Test Line: 1pc
Table Pen: 1pc
Power Plug: 1pc
User manual: 1pc

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions
Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA,SMD, etc. (especially mobile phone’s cable).
Shrinking, drying Paint drying, adhesive removal, thawing, warming, Plastic welding.

Related Names
Hot Air Gun Soldering Station | PCB Repair Kit | Precision Soldering Equipment

Features
If necessary, the machine can be added with the air gun handle stand, offering convenience for the dismantling and soldering of large chips.
1. Use the newest microcomputer processor PID program control technology, the precise digital show air gun and the iron temperature, the power is larger, the elevation of temperature is rapidly,it won’t influenced by the air output, it is realized leadfree desoldering. The procedure tracks the air gun and the iron actual temperature by highly speed take the millisecond as the unit, the mysterious temperature compensation speed strengthen the temperature stability, the temperature static error has been small, temperature compensation is very quickly，which could adapt each kind of adverse circumstance.
2. User-friendly design, the parts of SAIKE 952D air gun are equipped with the manual/automatic function to be possible to carry on the establishment according to the use environment situation, when the air gun use is frequently, it may omits elevates temperature time repeatedly to choose manual, it is conveniently and quickly, to raise the working efficiency!
3. Air gun heater using the latest technology(skeleton type), high-quality heater production, significantly improved the stability and reliability and significantly improve avoid to shocking and anti-strike (traditional techniques use quartz glass, can not afford to drop and re-shock, in the transport and use of the pro- cess is very easy to damage), and working life is much longer than the traditional type.
4. The handle equipped with a sensor switch, as long as we grip the handle, the system can quickly enter working mode; handle back into the handle frame, the system will enter standby mode, easy to operate in real time, meanwhile can extend heater life.
5. Use brushless fan as the air source,extremely long life, low- oise.
6. The iron part use high quality heating element, rapid heating and long service life; Antistatic design, to prevent electrostatic damage to the delicate SMD components.

Standard Configuration
Machine (include Air gun handle): 1set
Air gun Handle Frame: 1pc
Soldering Iron Handle (include iron tips and heater): 1pc
Iron Holder: 1pc
High Temperature Resistant Sponge: 1pc
Nozzles: 4pcs (5mm, 8mm, 10mm, 13*13mm)
Power Plug: 1pc
User manual: 1pc

Application
1. Electronic product assembly
2. Product development in scientific research departments
3. Electronic products maintenance
4. Electrical soldering operation
5. Skill training in all kinds of electronic institutions
Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA,SMD, etc. (especially mobile phone’s cable).
Shrinking, drying Paint drying, adhesive removal, thawing, warming, Plastic welding.

Related Names
Soldering And Desoldering Equipment | SMT Soldering Tool | PCB Soldering Station

Features
852D + + is based on the 852D + circuit board performance, structure and packaging optimized, more stable and reliable electrical properties, circuit structure and packaging structure more reliable.
As required, you can install an air gun fixed support which well suits the preheat board. Therefore, you can easily dismantle the large chip.
1. Use the newest microcomputer processor PID program control technology. The procedure tracks the air gun and the iron actual temperature by highly speed take the millisecond as the unit, the mysterious temperature compensation speed strengthen the temperature stability, the temperature static error has been small, temperature compensation is very quickly，which could adapt each kind of adverse circumstance.
2. Air gun heater using the latest technology(skeleton type), high-quality heater production, significantly improved the stability and reliability and significantly improve avoid to shocking and anti-strike (traditional techniques use quartz glass, can not afford to drop and re-shock, in the transport and use of the pro- cess is very easy to damage), and working life is much longer than the traditional type.
3. The handle equipped with a sensor switch, as long as we grip the handle, the system can quickly enter working mode; handle back into the handle frame, the system will enter standby mode, easy to operate in real time, meanwhile can extend heater life.
4. Use brushless fan as the air source,extremely long life, low- oise.
5. The iron part use high quality heating element, rapid heating and long service life; Antistatic design, to prevent electrostatic damage to the delicate SMD components.

Standard Configuration
Machine (include Air gun handle): 1set
Soldering Iron Handle (include iron tips and heater): 1 pc
Iron Holder: 1pc
High Temperature Resistant Sponge: 1pc
Nozzles: 4pcs (5mm, 8mm, 10mm, 13*13mm)
Power Plug: 1pc
User manual: 1pc

Application
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA,SMD, etc. (especially mobile phone’s cable).
2. Shrinking, drying Paint drying, adhesive removal, thawing, warming, Plastic welding.

Related Names
Low Temperature Lead Free Soldering Tool | Electronics Soldering Device | Thermostat Soldering Station

Features
1. Use the newest microcomputer processor PID program control technology, the precise digital show air gun and the iron temperature, the power is larger, the elevation of temperature is rapidly,it won’t influenced by the air output,. The procedure tracks the air gun and the iron actual temperature by highly speed take the millisecond as the unit, the mysterious temperature compensation speed strengthen the temperature stability, the temperature static error has been small, temperature compensation is very quickly，which could adapt each kind of adverse circumstance.
2. Air gun heater using the latest technology(skeleton type), high-quality heater production, significantly improved the stability and reliability and significantly improve avoid to shocking and anti-strike (traditional techniques use quartz glass, can not afford to drop and re-shock, in the transport and use of the pro- cess is very easy to damage), and working life is much longer than the traditional type.
3. Use diaphragm pump as the air source,extremely long life, low- oise.
4. The iron part use high quality heating element, rapid heating and long service life; Antistatic design, to prevent electrostatic damage to the delicate SMD components.

Standard Configuration
Machine (include Air gun handle): 1set
Soldering Iron Handle (include iron tips and heater): 1 pc
Iron Holder: 1pc
High Temperature Resistant Sponge: 1pc
Nozzles: 3pcs (5mm, 8mm, 10mm)
Power Plug: 1pc
User manual: 1pc

Application
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA,SMD, etc. (especially mobile phone’s cable).
2. Shrinking, drying Paint drying, adhesive removal, thawing, warming, Plastic welding.

Related Names
BGA Rework Equipment | China Desoldering Station | Variable Temperature Soldering Station

Features
1. Use the newest microcomputer processor PID program control technology. The procedure tracks the air gun and the iron actual temperature by highly speed take the millisecond as the unit, the mysterious temperature compensation speed strengthen the temperature stability, the temperature static error has been small, temperature compensation is very quickly，which could adapt each kind of adverse circumstance.
2. Air gun heater using the latest technology(skeleton type), high-quality heater production, significantly improved the stability and reliability and significantly improve avoid to shocking and anti-strike (traditional techniques use quartz glass, can not afford to drop and re-shock, in the transport and use of the pro- cess is very easy to damage), and working life is much longer than the traditional type.
3. The handle equipped with a sensor switch, as long as we grip the handle, the system can quickly enter working mode; handle back into the handle frame, the system will enter standby mode, easy to operate in real time, meanwhile can extend heater life.
4. Use brushless fan as the air source,extremely long life, low- oise.
5. The iron part use high quality heating element, rapid heating and long service life; Antistatic design, to prevent electrostatic damage to the delicate SMD components.

Standard Configuration
Machine (include Air gun handle): 1set
Soldering Iron Handle (include iron tips and heater): 1 pc
Iron Holder: 1pc
High Temperature Resistant Sponge: 1pc
Nozzles: 4pcs (5mm, 8mm, 10mm, 13*13mm)
Power Plug: 1pc
User manual: 1pc

Application
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA,SMD, etc. (especially mobile phone’s cable).
2. Shrinking, drying Paint drying, adhesive removal, thawing, warming, Plastic welding.

Related Names
BGA Rework Equipment | China Desoldering Station | Variable Temperature Soldering Station

Features
1. Sensors closed loop. Zero-crossing triggering microcomputer temperature control, LED display big power supply. Heating up rapidly, the temperature accuracy and stability, without effect of the mount of wind, demolition truly lead-free solder.
2. Air flow rate can adjustable, a large amount of gentle wind, temperature regulation, it can adapt to multiple use.
3. Handle with sensor switch, as long as the grip handle, the system can quickly enter into the working mode; handle released into the handle frame, the system will enter standby mode, real-time and easy operation.
4. The system automatic cold wind features to extend life and protect the hot air gun.
5. Using extremely long life brushless fan, the noise minimum; using high-quality heating element under the same power, the efficiency improvements double which can effectively extend the service life of heating element and power savings.
6. Iron part is anti-static design, to prevent electrostatic damage to delicate SMD components.
7. High-quality heating iron core, warming up quickly, long service life.
8. 898 series are enhanced to improve form 878 series and inheritance 878 series all the advantages. At the same time, using SAMSUNG micro-computer processor and PID technology to enhanced temperature stability.
9. Various parts of machine device (including the iron) are have self-deteetion function, full intelligent over-temperature, short circuit, open circuit, overload failure have display and protection.
10. SAIKE 898D+ soldering iron is equipped with an imported high-power heater which comes with fast temperature compensation. Therefore, it is ideal for de-soldering all sorts of welded spots, particularly suitable for de-soldering large solder joints, rough blocks, and miscellaneous difficult solder joints.
11.Uses blue Ferro-alloy iron holder, thereby averting scalding.

Standard Configuration
Machine (include Air gun handle): 1set
Soldering Iron Handle (include iron tips and heater): 1 pc
Iron Holder: 1pc
High Temperature Resistant Sponge: 1pc
Nozzles: 4pcs (5mm, 8mm, 10mm, 13*13mm)
Power Plug: 1pc
User manual: 1pc

Application
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA,SMD, etc. (especially mobile phone’s cable).
2. Shrinking, drying Paint drying, adhesive removal, thawing, warming, Plastic welding.

Related Names
Fine Tip Soldering Iron Kit | PCB Components Soldering Station | Heat Gun Soldering Tool

Features
1. Sensors closed loop. Zero-crossing triggering microcomputer temperature control, LED display big power supply. Heating up rapidly, the temperature accuracy and stability, without effect of the mount of wind, demolition truly lead-free solder.
2. Air flow rate can adjustable, a large amount of gentle wind, temperature regulation, it can adapt to multiple use.
3. Handle with sensor switch, as long as the grip handle, the system can quickly enter into the working mode; handle released into the handle frame, the system will enter standby mode, real-time and easy operation.
4. The system automatic cold wind features to extend life and protect the hot air gun.
5. Using extremely long life brushless fan, the noise minimum; using high-quality heating element under the same power, the efficiency improvements double which can effectively extend the service life of heating element and power savings.
6. Iron part is anti-static design, to prevent electrostatic damage to delicate SMD components.
7. High-quality heating iron core, warming up quickly, long service life.
8. 898 series are enhanced to improve form 878 series and inheritance 878 series all the advantages. At the same time, using SAMSUNG micro-computer processor and PID technology to enhanced temperature stability.
9. Various parts of machine device (including the iron) are have self-deteetion function, full intelligent over-temperature, short circuit, open circuit, overload failure have display and protection.

Standard Configuration
Machine (include Air gun handle): 1set
Soldering Iron Handle (include iron tips and heater): 1 pc
Iron Holder: 1pc
High Temperature Resistant Sponge: 1pc
Nozzles: 4pcs (5mm, 8mm, 10mm, 13*13mm)
Power Plug: 1pc
User manual: 1pc

Application
1. Suitable for a various kind of soldering or desoldering (removals) purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA,SMD, etc. (especially mobile phone’s cable).
2. Shrinking, drying Paint drying, adhesive removal, thawing, warming, Plastic welding.

Related Names
Fine Tip Soldering Iron Kit | PCB Components Soldering Station | Heat Gun Soldering Tool